|
|
Production preparation in business model
Čermáková, Lucie ; Videcká, Zdeňka (referee) ; Juřica, Pavel (advisor)
This master thesis deals with the design of technological preparation of production and product manufacturing together with the design of a model company established in the premises of the LAPROCO business process management laboratory. This model enterprise is intended to support the teaching of the Bachelor's degree programme in Process Management. The analysis describes the laboratory including its equipment and the curriculum and its content. The design part then deals with the outline of the model enterprise and its activities.
|
|
|
Static solution of the load-bearing structure of a multifunctional building
Svozil, Matěj ; Čairović, Dorde (referee) ; Zlámal, Martin (advisor)
The bachelor's thesis deals with the assessment and design of selected characteristic parts of a multifunctional house. The multifunctional house consists of five above-ground floors and one underground floor. The 2nd floor to the 5th floor is intended for living. The first above-ground floor is used for the operation of the fitness center and the cafe. The underground floor is intended for an underground garage and partly for storage cubicles and technical room. The assessed elements are the ceiling slab above the typical floor, the most loaded column and the reinforced concrete monolithic staircase. In order to obtain the internal forces, FEM was used using the SCIA Engineer 22 program, verified by manual MSM. The final output of the bachelor thesis is a static calculation and drawings of the reinforcement of individual structural elements. In the course of the entire assessment, the applicable standards were followed.
|
|
|
Reinforced concrete structure
Hubačková, Pavlína ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of a department store. Elements for design are locally supported ceiling sab, column and foundation pad. The calculation of internal forces was performed in a computational program SCIA Engineer 17. The Results of the software are compared with the result of the simplified manual method. The settlement of foundation was performer in program GEO 5. A graphical documentation of selected elements is also a part of the thesis. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Bridge on the I/11 road
Jedlička, Martin ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Aim of this thesis is to design a concrete road bridge over a Neborůvka stream and surrounding valley. This bridge is a part of I/11 road. Three preliminary designs with focus on girder bridge solution were made. As a most suitable variant was chosen two gilder beams variant. For this variant was made a static calculation concerning TDA. This design was made according EC. As a construction method was chosen classic construction with falsework. Design was made in Midas Civil and Dlubal RFEM calculation software. As a next step a drawing documentation was made as well as construction time plan and bridge visualization.
|
|
| |
|
|
Box girder bridge
Vostal, Lukáš ; Pecha, Jakub (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design of a prestressed box girder construction with several spans. Two variants are designed and for detailed solving was chosen the variant of the box girder. The length of loadbearing structure is 212 m, the longest span has 60 m. The calculation of load effects is done by software Scia Engineer 19.1. Drawing part is done by software Allplan Engineering 2021. The thesis includes drawings, representation of the construction proces, visualization and a structural design. Designing and assessments were made according to currently valid European standarts.
|
|
|
Girder bridge over the Blanice River
Kostka, Vojtěch ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Bachelor thesis is dealing with a design of the road bridge on the road III/14 130 in Zábrdí. Bridge leads over the river Blanice. There are three possible variants in preliminary desing. Study no.1 - Girder bridge is developed in detail. Solution of bachelor thesis includes statical analysis, drawing documentation and visualisation.
|
|
|
Complex diagnostics of the family house
Tomanová, Jana ; Balkanský, Ondřej (referee) ; Schmid, Pavel (advisor)
This master´s thesis deals with the issue of the building from a clay. It is focused on defects and rehabilitations of these constructions. The introductory parts concerns with probable defects especially of clay buildings, furthermore with causes of the creation of defects, its depictions and the relevance. In the following part the methods of rehabilitation not only of clay buildings are presented. In this part the rehabilitative methods of foundation, vertical and wood constructions, which create mainly the structural support of the buildings, are described. In the second part, the structural and technical research of the current structure with farm part – barn is executed. The part of research is creation of the drawing documentation, description of disposition and structural and constructional solution of building, structural calculation of a part of construction, assessment of actual state of structure and prospective plan of proceeding and rehabilitation.
|
|
|
Design of prestressed bridge structure
Anděl, Martin ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
The aim of this thesis was to suggest two alternatives of a prestressed concrete bridge structure over the river Jihlava in Ivančice and to design the chosen one. The structure was designed as a one-span frame bridge with the span range of 46,0 m. Both design and relevant drawing documentation of the slab, abutment and strip foundation was made.
|
|
|
Overpass bridge across the highway
Černý, Pavel ; Šopík,, Leonard (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.
|
guest ::
