|
|
Web Portal and DigitalniPodnik.cz Application
Sýkora, Martin ; Lacko, Branislav (referee) ; Šeda, Miloš (advisor)
The thesis deals with the creation of a website and a web application of a project to support digitization in small and medium-sized companies in the Czech Republic. The website and applications are built on the Websy content management system. The test environment that was created provides an assessment of the company's digital maturity. The expert module contains additional functions for members of the cooperating expert group.
|
|
|
Digitizing of exhaust piping
Janečka, Karel ; Koutný, Daniel (referee) ; Paloušek, David (advisor)
This bachelor thesis deals with the possibilities and practical use of 3D scanning systems for engineering. The work includes the distribution of basic facilities for 3D digitizing, and their basic properties. The aim of this work is familiar with the procedure in reverse engineering, which is demonstrated on a specific example, the digitization of the exhaust pipe, using the 3D scanner Atos I and CAD system CATIA.
|
|
| |
|
|
3D surfaces reconstruction of motorcycle body
Vašíková, Martina ; Čudek, Vladimír (referee) ; Paloušek, David (advisor)
This bachelor thesis based on the coputer programs and practical solving in the area of reverse engineering. This work contains the definition of concept of the reverse engineering; distributed digitalizing using the 3D scanning, mathematical description of curves and areas and summary of programs, which are destination for reverse engineering. The goal of this thesis is to form the 3D surface digitalized reconstruction the motorcycle body in Rhinoreverese program.
|
|
|
Creating a Simplified CAD Model of the Engine Using Reverse Engineering Method
Koten, Stanislav ; Svída, David (referee) ; Beran, Martin (advisor)
This bachelor thesis deals with the creation of a simplified CAD model of the engine using 3D digitizing for installation in the car with a tubular frame. The first part describes the issue of reverse engineering, the second part is devoted to the description and function of the optical measuring system GOM ATOS company and the final section describes the scanning geometry of the engine, after-treatment of polygonal mesh and creating a custom 3D model using Autodesk Inventor 2013.
|
|
|
Measurement of the rain rate instantaneous value using acoustic method
Kresta, Daniel ; Poliak, Juraj (referee) ; Wilfert, Otakar (advisor)
This thesis deals with implementation of the rainfall rate measurement using an acoustic method. It is divided into four parts. In the first part of the thesis a necessary theoretical knowledge is analysed. The second part contains a design of a workplace used for the measurement. The third part presents and analyses important experimental recordings acquired in the workplace. Then all measured values are processed and applied in the measuring program. The last part summarizes results of the thesis, advantages and disadvantages of using the acoustic rainfall rate meter.
|
|
|
Digitalization of ultra-light plane fuselage for production of accurate mould
Véle, Filip ; Sedlák, Josef (referee) ; Zouhar, Jan (advisor)
This work describes digitalization and creation of ultralight aircraft 3D model in order to create accurate moulds for fuselage lamination. Right choice of technology is based on background research. Designed procedures are described in detail as well as used equipment, hardware and software. Objective of this project is application of available methods of digitalization to create 3D aircraft model and its usage for accurate mould design.
|
|
| |
|
|
Digitization of data for non-conforming pieces (NOK) in the company
Ježek, Jiří ; Zuth, Daniel (referee) ; Maradová, Karla (advisor)
The Masters thesis is focused on the digitalization of data for non-conforming pieces with NOK status made on assembly line. It is mainly about designing a solution that will help to eliminate the nowadays outdated analogue methods. For the choice of digitization, two methods of solution implementation will be proposed in the thesis along with the method of data reporting. These streamlining will consequently lead to not only time but also economic savings for the company. The thesis concludes with recommendations for further development and economic evaluation.
|
|
| |
guest ::
