|
|
Electronic kits in physics education
Hnyk, Michal ; Žilavý, Peter (advisor) ; Dvořák, Leoš (referee)
Title: Electronic kits in physics education Author: Michal Hnyk Department: Department of physics education Supervisor: RNDr. Peter Žilavý, Ph.D., Department of physics education Abstract: This diploma thesis named Electronic kits in physics education contains five main parts. It deals with the use of electronic kits in the physics education and references a research of literature discussing this problem in the first part. Thesis offers a brief overview of types of electronic kits, which are being used in education in schools of the Czech republic in the second part. The third fundamental part then describes the design of the prototype of kit suitable for education and documents the construction including the experience, which author acquired during the work, and technological processes. Fourth part of the work documents the piloting of the kit. The Builder's guide, which is a part of the kit and serves as a source of knowledge and suggestions for the user, is presented in the last part. Keywords: electronics, kit, education
|
|
|
The Evolution of the Global Microchip Market
Srba, Lukáš Martin ; Bolotov, Ilya (advisor) ; Čajka, Radek (referee)
This thesis aims to explain the evolution and transformation of the microchip industry. It focuses on the changes and prediction of the future state including its causes and consequences. The analysis starts on the general description of the market and continues through its subjects ending on relationships between them. This serves as a source of information to the prediction in the final part of the thesis. In the beginning the products, which are taken into consideration in this work (namely CPUs, GPUs and APUs), are described. Following this, there is an analysis of the competition environment that defines a structure of the market upon which further work is based. (Three levels; the manufacturer of photolithographic machines, makers of the chips and their designers and OEM and aftermarket subjects.) The penultimate part defines the barriers to entry to this market and three categories are drawn up: economic, technical and geoeconomic, which are applied to every level of the market. Thus all prerequisites to a successful prediction are satisfied. In the last part of the thesis the prognosis is made and defined, along with its assumptions and limitations. In the concluding part of this work the consequences and results are summarized.
|
|
| |
|
|
Complex simulation model of vibration power generator
Harapát, Jan ; Ondrůšek, Čestmír (referee) ; Hadaš, Zdeněk (advisor)
This work is focusing on analysis of current development in energy harvesting projects in aerospace industry field, and on analysis of current development in vibration generator field. It is also concentrating on establishment of a complex simulation model of vibration generator. It deals with modeling of magnetic field of generator and its cross connection with a mechanic and an electronic model.
|
|
|
Support software for projection of burglar alarm systems
Fikejs, Jan ; Pust, Radim (referee) ; Burda, Karel (advisor)
This graduation thesis deals with a software design of burglar alarm. The software has been developed in compliance with the applicable standards and regulations governing burglar alarm designs and on the basis of practical experience with designing and implementing electronic security systems. The software is written in C# and uses .NET platform. On the ground of that, this software can be run on any computer with the Windows operation system. Any ground plan picture file can be used as the underlying project map on which all the object security system can be built. It makes it possible to produce both wire and wireless electronic security systems. The software includes an editable database of components and conductors used in the electronic security alarms. The database components can be created, edited and deleted through the software. The database has been saved in format XML. The software also includes a folder of picture files containing photographs of the components and schematic symbols used in the software. You use a mouse to drag and drop individual components into the ground plan picture, where they are well arranged in a tree structure. The components can be interconnected by a conductor, which enables creation of a precise design of the electronic security system of the object. The software output includes drawings, bills of material and pricing. As for the space components, you can graphically display their range and thus visually confirm the design. The software includes automatic design verification. There, you can verify whether the right components have been used and whether the designed conductor lengths are acceptable, whether they correspond with the system load, and whether the voltage drops on the conductors do not exceed the permitted limit. The software has been developed for all electronic security system designers and for engineers attending to these problems.
|
|
|
Standuino
Merta, Ondřej ; Boleslavsky, Andrej (referee) ; Šedivá, Barbora (advisor)
Standuino is the inovative force in hand-made electronic music and open source hardware as well as theoretically and historically driven movement that results in artworks, bands, workshops, happenings and writings. Standuino started as a clone board of popular Arduino but adapted to even more DIY approach of eastern region (=bastl). With this powerful tool it became part of many art installations and enabled our research team to build prototypes of many different devices most importantly musical instruments. The whole concept of Standuino is inspired and covered by the story of a pioneer of media art – Standa Filip.
|
|
|
Role predajného personálu pri budovaní vzťahu zákazníkov k vybraným typom predajní
Brokešová, Katarína
Brokešová K. The role of sales staff in building customer relationship to selected type of stores. Diploma thesis. Brno, 2014. This thesis focuses on how customers perceive the role of the sales staff when buying clothes and electronics and their requirements for costumer-orientated service. High competitive clothing and electronics markets show low level of customer loyalty. The aim of this study was to define the factors building or threatening the loyalty of customer against selected stores by using selling staff. Data were collected through quantitative and qualitative research which should confirm or refute already made researches on this issue and also to supplement information on the basis of which appropriate recommendations were designed to solve the issue.
|
|
|
Proposal of ideal smart home functionality
Zumr, Jiří ; Bruckner, Tomáš (advisor) ; Pavlíček, Luboš (referee)
The house in which the family live, should be built for the specific lifestyle residents and respond intelligently to their current and changing needs. Nowadays there are some new buildings that have such requirements partially resolved. The proposed project is based on the situation of families living in older buildings that no longer complies with their needs. Therefore they are considering home reconstruction to transform house into so-called "smart" house or apartment. The project deals with the functioning of modern living that reflects the lifestyle and how to be a house or flat is used. It takes into account the location of individual system components (control and regulation elements, controls, cameras, sensors, audio-visual equipment, etc.), and their interconnection to the selected specific component types that are in keeping with the style and interior design. The work is based on the description of the ideal smart home functionality to create smart design solutions of selected house based on currently available technologies. Detailed design is developed using available technology to control home appliances.
|
|
|
Application of Programmable Logic Controller - Siemens LOGO! in high school education of automatization and electronics
KOŠÍČEK, František
The content of the thesis is to familiarize students with module PLC Siemens LOGO! and its practical use in teaching courses in the subjects as automation, electro-nics and mechatronics at vocational secondary schools. The content is focused on the basic description of the development and graphical environment and its use in practical problems solving. In the practical part of the proposals there are worksheets for pupils with the design of pupils´ simple tasks. After studying this text and the compilation of practical problems, the student should be capable of independent operation with module PLC Siemens LOGO! and implementation of complex applications.
|
|
|
Recyklační programy
CEMC - České ekologické manažerské centrum, Praha ; EKO-KOM, Praha ; Vysoké učení technické, Fakulta podnikatelská, Brno ; Výzkumný ústav vodohospodářský T.G.Masaryka, Praha ; SLEEKO, Praha ; ENZO, Praha ; ECO trend, s.r.o., Praha ; Vejnar, Pavel ; Havránková, Věra ; Jurová, Marie ; Černík, Bohumil
Přílohová část A obsahuje: Příloha 1: Ověření metodiky hodnocení logistické spirály životnosti u vybrané komodity (pneumatiky, elektronika a výpočetní technika). Příloha 2: Stanovení metodiky a základních ukazatelů pro hodnocení účinnosti recyklačních programů.
|
guest ::
