|
|
Horizontal driven roller conveyor
Sláma, Jakub ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with design-driven horizontal roller tracks for the transport of steel castings in the interoperation internal transport, was made functional calculation of the roller track and determined the main dimensions of lines, the work deals with designing the drive, strength calculation poháněcího chain and check the frame lines. Subsequently, the preparation of its finished drawing lines, assembly lines and drawing section drawing of the drive subassembly lines.
|
|
|
Surveying of the actual state of the farm in Jekov.
Pracná, Petra ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
This thesis is focused on surveying and documentation of the actual state of the farm in Jekov which is situated in Zvěstov village and it is part of Bořkovice land register. The first part of the thesis deals mainly with surveying itself, preparing of the geodetic control and planimetric and altimetric survey. The accuracy of the surveying is described. The second part of thesis is focusing mainly on creating the technical drawings. The specification of documentation of the historical buildings is mentioned.
|
|
| |
|
| |
|
|
Surveying of Vertical Network with Use of Electronic Levelling.
Czíria, Kornél ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
The work deals with building and followed surveying of two vertical networks with the method of geometric levelling using electronic level Leica Sprinter 150M with coded levelling rot. Due to the large difference in height between the points of the network corrections were introduced from the levelling-rot calibration at places of contact of the withdrawable parts of the levelling-rot. These corrections were calculated by the procedure, which was determined by the calibration test measurements. The final height of points of the network were adjusted by the method of least squares. Benefit of the calibration was analysed by comparing the results with the introduction and without introducing calibration corrections. Part of the work is also analysis of the accuracy and documentation of points of the vertical networks.
|
|
|
Utilization of clays with low sintering temperature in brick technology
Sláma, Jakub ; Skotal, Zbyněk (referee) ; Sokolář, Radomír (advisor)
Bachelor thesis focuses on the use of the low sintering clays as additives in brickmaking. Their main use in the brick industry is mainly in the production of facing bricks and roof tiles. They are used for their very good sintering ability even at relatively lower firing temperatures. This feature is the most important for frost resistence of brick fragment. The theoretical part contains a summary and characteristic features of clays occurring in the Czech Republic and abroad. Further their requirements and laboratory testing of brick clay. In the practical part was conducted market research where are outlined available low sintering clays that may be proposed for use in brick fragment based on declared sintering. An experiment was performed in the next part of bachelor thesis to assess the effect of using low sintering clay in terms of particular brick factory in the Czech Republic (Tondach Šlapanice).
|
|
|
Thematical map in area Malá Morávka
Kolb, Jan ; Ing.Jiří Sláma (referee) ; Kutálek, Stanislav (advisor)
A main purpose of this bachelor thesis is presentation of problem about evaluation of thematic map of the location Hvězda in Malá Morávka for following needs of project work. Evaluation of thematic map often doesn’t end with one purposed action, but it is connected with following actions, that can complete or develop an original purpose. Underground courses of engineering networks in area site were staked and after that they were also surveyed. A purpose of staking and surveying is legalization of usage. Important part of work is staking of parcel’s boundaries that has to be agreed by owners. Geometric plan for marking of real execution of constructions is also important part of work.
|
|
|
Connecting Footbridge
Sláma, Jakub ; Štrba, Michal (referee) ; Brosch, Petr (advisor)
The subject of this master’s thesis was desingn and assessments the connection of two buildings by footbridge corridor. The structure was designed as a lattice structure without verticals. Construction is stored on two pillars lattice design. Cladding footbridge was cosidered by glazing. Construction is freestanding and doesn’t load bordering adjacent buildings.
|
|
|
Design of measurement robotized workcell
Tvardek, Michal ; Sláma, Josef (referee) ; Knoflíček, Radek (advisor)
This master's thesis focuses on the use of the Renishaw's Equator gauging system in cooperation with the industrial robot. The target is to design the robotized workcell which contains these two products. Robot acts as a manipulator for inserting and sorting out the workpieces into the "good" and "bad" pallets according to measured results from the Equator. Equator uses a parallel kinematics and probing system which is normally used on coordinate measuring machines. Therefore there is the introduction to the parallel and serial kinematic structures, to the problems of the coordinate measuring machines in the first part of this thesis. It was made a separation of the probing systems into a few basic categories, description of the typical representatives of these categories and of the other important accessories of the coordinate measuring machines, too. The second part of the thesis contains a description of the Equator gauging system, the industrial robot which I used and their accessories. In this part is mentioned a few examples of measurement automation in industry practice, too. The third part devotes to the design of the robotized workcell and contains all the important requirements for the realization.
|
|
|
Geodetic Works During Reconstruction of Road Crossing in Uherské Hradiště
Lovecký, Marek ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
This thesis is engaged in geodetic works related to the increase of the capacity of the road II/497 and the modification of the intersection with the road I/55 in the town of Uherské Hradiště. The work is mostly focused on the field of the engineering geodesy. It resolves the issues from the alignment during the construction to the focus of the construction itself. Individual survey procedures are analyzed in the context of the prescribed deviations specified in the project documentation or ČSN. Geodetic documentation for the selected measurements is worked out.
|
guest ::
RSS feed.