| |
|
Innovative methods of airport biological control
Bulíček, Pavel ; Motyková, Veronika (referee) ; Kujal, Tomáš (advisor)
The main content of this master’s thesis is identification of biological threats and analysis of present means of aerodrome biological control, description of their effectiveness and possibilities of usage. Furthermore the way of bird strikes recordkeeping and innovative means, devices and procedures of aerodrome biological control considering the required safety level are mentioned.
|
|
Application of a measuring probes in turning process
Verfl, Jan ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
My diploma work is focused on implementation of measuring probe to process of cutting operation by turning and description of their effective usage ways. Measuring probe are used as correction during turning process or to control measuring of turning work eventually to signal mistake in process. In practical part the laser measuring probe is used to control shaft functional dimensions. Measuring is done after tooling and it substitute exit control. Laser probe was also reviewed regarding usability for given purpose as measurement tool and in the same time were reviewed time and cost differences against alternative turning process.
|
|
Time management
Hanus, Filip ; Franková, Emilie (advisor) ; Motlová, Veronika (referee)
It is of great necessity to know how to manage time. The theoretical part of this thesis is concerned with the definition of time management, its origin and evolution. It covers the basic rules of efficient time management and the principles of efficient work organization. It describes the usage of goals and their setting, circadian rhythms and their influence on our productivity and the most common factors that steal our time. Based on the analysis of time frames and half-structured interviews, the empirical part follows the lives of six university students for two weeks. Our goal is to find out how the respondents use their time, what is their knowledge of time management and also to cover the difference between students living in a room alone and students sharing a room with one or multiple roommates.
|
|
The Study of Systém and Process optimization of Service operation
Prokeš, Viktor ; Havlásek, Roman (referee) ; Jurová, Marie (advisor)
This thesis is oriented on the automotive industry with the focus on the domestic producer of the vehicles – the Škoda Auto Company. It describes the subject of business in the mentioned company and subsequently it refers to the current trends of the automotive market in the Czech Republic. On the basis of the analyses` results of the after-sales services allied with usage of the Škoda-products it will propose their possible future progression. Thereinafter will the thesis concentrate on the description of the existing after-sales processes focused on the „through-pass“ of the vehicle through the authorised Škoda Auto service. It deals with the analysis of the service systems in detail using the tight cohesion of them. Modern technologies used in the current vehicles put significantly higher demands on their maintenance, which call for the continual optimization of the service processes with the maximal utilisation effort of the feedback. The appropriate personnel have become the necessity. For these purposes it will be recommended the introduction of the electronic multipurpose memory devices intended for the data collection. In the next step will the after-sale-service process be described with the focus on the usage of these electronic memory vehicle-keys with the reference to the procedural simplification of the maintenance operations. The final part of the thesis will evaluate the general contribution of the proposed resolution for the service processes as well as their users.
|
|
A Comparison of Two Models of the Energy Market Development in Czech Republic from 2015 to 2040
Dvořáková, Jitka ; Zeman, Martin (advisor) ; Lukášová, Tereza (referee)
The bachelor thesis is focused on the prediction of the energy market in the Czech Republic between 2015 and 2040 and on the comparison of potential costs related to two models of energy portfolio management. The first model was created according to the National Energy Concept from 2014, while the other one was designed artificially to simulate usage of the renewable resources in 50% of the electric energy production. The theoretical part of the thesis discusses the recent situation of the Czech energy market, defines types of energy resources and explains terms related to the discussed topic. In the practical part, direct production costs of different kinds of power plants were computed and used to estimate economic demands of the two considered models. The efficiency of both models was compared and evaluated. The aim of the thesis was to decide, which of the two models would be more favourable for the Czech national economy. Key words: energy, energy market, direct costs, economic advantage JEL classification: Q40, Q41, Q43, Q47
|
|
Laser cutting with air pressure assistance
Kramoliš, Lukáš ; Hála, Michal (referee) ; Mrňa, Libor (advisor)
This project, elaborated within the engineering studies (code of field of study: N2301), deal with air supported laser cutting and its practical usage in industry. The project is divided into theoretical and experimental sections, consisting of detailed description of several successive steps of the experiment. The theoretical section describes the principle and function of laser, individual types of lasers and their classification, laser beam properties, laser cutting, etc. The practical part is focused on finding of a set of optimal cutting parameters, assessment of results of air supported laser cutting in terms of quality and accuracy of cutting surface. This part is followed by comparison of cutting surfaces with a conventional technology of laser cutting that uses oxygen and nitrogen. Final part of the project evaluates applicability of this unconventional technology from the economic point of view.
|
|
Development of interest rates in the mortgage market in the Czech Republic between 2006-2016
Ditrichová, Gabriela ; Strejček, Ivo (advisor) ; Klement, Josef (referee)
This bachelor's thesis is focused on the development of interest rates in the mortgage market in the Czech Republic in the decade between 2006 and 2016. A strong economic growth between 2006 and 2007, which had positive effects in the mortgage loan market, was followed by a deep slump in the form of global financial crisis unleashed by speculations in the real estate market in the U.S. The main aim of the work is based on the development of mortgage interest rates and the significant factors that affect their amount - to verify or disprove the hypothesis that interest rates respond to changes of these factors. The results confirm the hypothesis only in certain areas. The influence of changes of interest rates has been proven in the case of inflation and discount rates by usage of the econometric model. Factors that have not shown a significant direct influence of interest rates may have an indirect influence on their change.
|
|
Cemented carbides and theirs effective use
Dembek, Jiří ; Sedlák, Josef (referee) ; Humár, Anton (advisor)
This diploma thesis is aimed on cutting tools made of cemented carbides. It characterizes marking, production and properties of non-coating and coating cemented carbides and describes the latest trends in coating. Target of this diploma thesis is comparison of assortment of two important world’s producers and one Czech producer in term of used productive technologies, products microstructure, coatings types, coatings methods and possibilities of their usage. Cutting data were evaluated and compared from obtained technical knowledge, which were recommended by chosen producers for effective turning application of their cutting tools. Recommended cutting speeds were found out for specific type of cutting material according to ISO, width depth of cut and for specific values of feeds per revolution.
|
|
Možnosti využití sociálních sítí pro podporu podnikání v autoservisech
Mischaniuk, Mykhailo ; Molnár, Zdeněk (advisor) ; Gála, Libor (referee)
The diploma thesis deals with the problem of using social networks in the field of car repair services. The primary aim is to provide the recommendations for businesses in a structured way on how to better utilize these networks to get better competitiveness. This work is divided into three parts. The first theoretical part deals with basic description of networks and their statistics. This part also covers some basic tools that we can use to analyze and maintain social network platforms. The second analytical part deals with competitive analysis in car repair services and gives an overview of the most popular Runet social network platforms. The third practical part provides structured view on all important aspects of social platform maintenance and behaviour. In this section, you can find the description of various views and the recommendations I give to the specific car repair service.
|
guest ::
