|
Study of behavior of concrete and cement based composite materials exposed to high temperatures
Bodnárová, L. ; Horák, D. ; Válek, J. ; Hela, R. ; Sitek, Libor
The paper describes possibilities of observation of behaviour of concrete and cement based composite material exposed to high temperatures. Nowadays, for large-scale tests of behaviour of concrete exposed to high temperatures, testing devices of certified fire testing stations in the Czech Republic and surrounding states are used. These tests are quite expensive. For experimental verification of smaller test specimens, a testing device was built at the Technical University in Brno, where tests of thermal loading of concrete tests specimens of various sizes can be carried out (dimensions up to 800 x 800 x 800 mm or slabs up to 1100 mm of length). The testing device opens new ways of observation of behaviour of concrete and cement based composite materials exposed to high temperatures as well as preparation of specimens for observation of interaction of water jet and concrete degraded by action of high temperatures.
Fulltext: content.csg -  DOC
Plný tet: UGN_0398264 - DOC
|
|
Information systems security penetration testing
Klíma, Tomáš ; Doucek, Petr (advisor) ; Čermák, Igor (referee) ; Čapek, Jan (referee) ; Štubňa, Ivan (referee)
The aim of this dissertation thesis is to develop new methodology of information systems penetration testing based on analysis of current methodologies and the role of penetration tests in context of IS/IT governance. Integral part of this aim is evaluation of the methodology. The first part of the thesis is devoted to the presentation of history and current state of research in selected area, definiton of basic terms and introduction of role of the penetration tests. This part is followed by the review of relevant sources and comparative study of current methodologies with a goal to identify their weaknesses. Results from this study are further used as a basis for new methodology development. Classification of IS penetration tests types and testing scenarios are also included. The second part includes design of new methodology, at first its history, structure and principles are presented, then its framework is decribed in high level of detail. In the third part the reader can find (theoretical and practical) validation. The biggest scientific contribution is the methodology itself focused on managment of penetration tests (which is the area currently not sufficiently descibed). Secondary contribution is the extensive review and the comparative analysis of current methodologies. Contribution to the economic and technical (practical) application we can mainly see in the development of new methodology which enables companies to improve management of penetration tests (especially planning, operational management and implementation of countermeasures).
|
|
Differences between men and women in the Czech labour market
Stroukal, Dominik ; Kadeřábková, Božena (advisor) ; Pavelka, Tomáš (referee) ; Němec, Otakar (referee)
This thesis consists of five articles that apply current world research on labor economics at the Czech Republic and confirms the significant differences between men and women in this market. It shows that gender has a significant influence on the preference on the labor market and, consequently, on employment and health. First, the thesis shows that preferences are relevant determinant of career and then we study the difference in preference of salary for men and women. Subsequently it shows that gender plays a significant role in explaining the relationship between homeownership, and unemployment, as well as unemployment and health. The first chapter was able to demonstrate that the preference for a career has a positive influence on the choice of career. The influence of higher education on prioritizing career proved to be positive and significant. Probability of a career choice is reduced by the presence of children, however, is not dependent on their number, which is contrary to the theory of preferences. The second chapter shows that Czech women prefer more non-monetary rewards than men. It has also been shown that people with university education are same in the preferences of non-monetary rewards regardless of the gender of the respondents, however, compared to the world's research, the Czech higher education increases this preference. It turned out that women prefer risk less than men. The third chapter demonstrates that although the housing market undermines labor mobility and employment in the Czech Republic at the regional level, therefore, that in regions with a higher rate of home ownership is higher unemployment, at the individual level, the owners of housing are unemployed are less likely. The estimates are significantly different for men and women. Men living in owner-occupied housing have a higher likelihood of employment than women. At regional level, however, this thesis shows that the high rate of home ownership increases unemployment for both men and women, in the long run only to women. The fourth chapter showed that men transition to homeownership reduces the likelihood of unemployment next year. For women, this relationship has proved to be insignificant. In addition, as insignificant showed the opposite relationship, the transition from unemployment to the newly acquired home ownership. The last chapter shows that the change in the working status to unemployment will increase in the future probability of worse health. Influence in less than two years, however, proved to be significant. An important conclusion is that men have a significantly stronger relationship between health and unemployment than women.
|
|
Respecting human dignity in nursing care for patients in long stay hospitals
Řádová, Veronika ; Kutnohorská, Jana (advisor) ; Mareš, Jiří (referee) ; Pečenková, Jaroslava (referee)
88 Synopsis Author: Veronika Řádová Institutions: Charles University in Prague Faculty of Medicine in Hradec Králové Institute of Social Medicine Department of Nursing Title: Respecting human dignity in nursing care for patients in long stay hospitals Supervisor: doc. PhDr. Jana Kutnohorská, CSc. Number of pages: 102 Number of attachments: 3 Year of viva voice: 2010 Keywords: geriatrics, human dignity, respect for the patient, nursing care, nursing ethics The thesis deals with respect for human dignity in nursing care. The human dignity is a fact that becomes increasingly important with the length of human life. The care of geriatric patients has its own characteristics, due to changes, which pass through the body in old age. High demands are placed on the nursing staff not on only technical but also on human and ethical aspects of nursing care. The research tasks deal with specific types of human dignity, as the nursing staff encounters them during their work. The investigation is focused on the quantitative expression of respect for various types of human dignity in nursing practice from the perspective of the nursing staff. During the research, the staffs were also asked questions about the interpersonal response to the undignified behaviour, interviewees using their discretion were supposed to create a...
|
|
The current state and prospects for sustainable development of tourism in Slovakia.
Libantová, Silvia ; Indrová, Jarmila (advisor) ; Chaloupka, Radek (referee)
Tourism contributes to the prosperity of destinations by bringing financial resources, new jobs, a higher level of services and infrastructure development. However, if tourism does not develop sustainably, it is accompanied by negative factors, as well. Especially, negative impacts on the environment, such as: water and soil contamination, increased noise and overcrowded destination during the high season. As a response to the worsening state of the environment and possible irreversible changes caused by irresponsible human behavior, the idea of sustainable development is becoming more important. The theoretical part describes tourism in the Slovak Republic and highlights plans for sustainable tourism development. In the practical part, the results of the questionnaire, related to the awareness of sustainable tourism in the Slovak Republic, are evaluated. The main objective of this thesis is to evaluate the current situation in the field of sustainable tourism and to make suggestions for its future development.
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
| |
| |
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
guest ::
