| |
| |
| |
|
Study of plasma-solid interaction at medium pressures
Roučka, Štěpán ; Hrach, Rudolf (advisor) ; Novotný, Dušan (referee)
The thesis is aimed at particle simulation of plasma at medium pressures. Main results concern modelling of collisions in particle-in-cell algorithm. Dierent methods of modelling of collisions are discussed and their accuracy and eciency are investigated. Furthermore a new modication of particle-in-cell algorithm for modelling at medium pressures was proposed. Numerical benchmarks in the nal chapter show advantages of the new algorithm.
|
|
Dynamic behavior od rotor dynamics stystem vibrating in a liquid
Chlud, Michal ; Pochylý, František (referee) ; Malenovský, Eduard (advisor)
This thesis deals with dynamic behavior of swirl turbine vibrating in a liquid. Primarily is studied decrease of natural frequencies of rotor due the interaction with fluid environment, namely for different levels of submerged rotor in fluid. After that follows the detection of natural frequencies of swirl turbine in operating speed. The problem is solved by computational modeling in ANSYS system. For this solution is used acoustic elements method. The results are compared with experiment.
|
|
Permeation of VOC vapours through carbon nanotube network membranes controlled electrically
Slobodian, P. ; Říha, Pavel ; Olejník, R.
In this letter, we report the increase of permeation rates of some typical volatile organic compounds through entangled carbon nanotube networks by an electric current. The change in the permeation rate is reversible when the\ncurrent is turned off. The permeation rise is partly probably due to Joule effect and thus increased membrane temperature and vapor pressure in the vicinity of the inlet side of membrane. However, the effects of vapor polarity and electrostatic interaction of vapors and charged nanotubes seem to be also involved and contribute to the differentiation between alcohol and carbohydrate vapors permeation.
|
|
Dynamic behavior od rotor dynamics system vibrating in a liquid
Kučera, Martin ; Pohanka, Lukáš (referee) ; Malenovský, Eduard (advisor)
This thesis deals with dynamic behavior of rotor dynamics system vibrating in a liquid. Work is factually oriented on influence of the liquid to natural frequences of rotor of vortex turbine. There is described the creation of geometric and computational model of the system and the results of natural frequences and damping in dependence on environment are presen-ted. There are compared variations in natural frequences of the rotor system, which are caused of the interaction of the various level of the water environment. The step of integration are tested and compared for choise solving method. Problem is solved by computational simulation in commercial software ANSYS 11.0 There is used software tools Multiphysics/FSI.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Trust and Reputation in Distributed Systems
Samek, Jan ; Návrat,, Pavol (referee) ; Šafařík,, Jiří (referee) ; Hanáček, Petr (advisor)
This Ph.D. thesis deals with trust modelling for distributed systems especially to multi-context trust modelling for multi-agent distributed systems. There exists many trust and reputation models but most of them do not dealt with the multi-context property of trust or reputation. Therefore, the main focus of this thesis is on analysis of multi-context trust based models and provides main assumptions for new fully multi-contextual trust model on the bases of them. The main part of this thesis is in providing new formal multi-context trust model which are able to build, update and maintain trust value for different aspects (contexts) of the single entity in the multi-agent system. In our proposal, trust value can be built on the bases of direct interactions or on the bases on recommendations and reputation. Moreover we assume that some context of one agent is not fully independent and on the bases of trust about one of them we are able to infer trust to another's. Main contribution of this new model is increasing the efficiency in agent decision making in terms of optimal partner selection for interactions. Proposed model was verified by implementing prototype of multi-agent system when trust was used for agents' decision making and acting.
|
|
Multimedia Data Processing in Heterogeneous Distributed Environment
Kajan, Rudolf ; Ferko,, Andrej (referee) ; Míkovec, Zdeněk (referee) ; Herout, Adam (advisor)
Pervasive computing sa zameriava odstránenie zložitostí pri interakcii s výpočtovou technikou a zvýšenie efektivity pri jej každodennom používaní. Ale i po viac ako 15 rokoch od sformulovania hlavných cieľov Pervasive computingu existujú aspekty interakcie ktoré stále nie sú súčasťou užívateľskej skúsenosti s dnešnou technológiou. Bezproblémová integrácia s prostredím vedúca k technologickej neviditeľnosti, alebo interakcia naprieč rôznymi zariadeniami predstavujú stále veľkú výzvu. Hlavným cieľom tejto práce je prispieť k tomu, aby sa ciele Pervasive computingu priblížili k realizovaniu tým, že predstavíme spôsob intuitívneho zdieľania informácií medzi osobným a verejne umiestneným zariadením. Predstavili sme tri interakčné techniky, ktoré podporujú intuitívnu výmenu obsahu medzi osobným zariadením a zdieľaným displejom. Tieto techniky sú založené na prenose videa, rozšírenej realite a analýze pohľadových dát. Okrem interakčných techník sme tiež predstavili mechanizmus pre získavanie, prenos a rekonštrukciu aplikačného stavu na cieľovom zariadení.
|
guest ::
