| |
|
The Value of CSR for Czech Consumers
Faradji, Elise ; Štěrbová, Ludmila (advisor) ; Seror, Patricia (referee)
Nowadays consumers purchasing behavior is influenced by new factors such as the social and environmental implication of companies. This is why Corporate Social Responsibility (CSR) is a growing trend which companies need to look after carefully. However implementing an efficient CSR strategy is a complex process for corporations; especially since the core concept of CSR remain quite blurry. The goal of this study is to analyze the perception of consumers towards CSR to find out about the value creation that CSR produce for consumers and its impact on their purchasing behavior. This paper will ultimately help companies to implement their CSR strategy more efficiently. This study aims to contribute by conducting an in-depth analysis of consumers attitudes and behavior towards CSR. If most of researchers are using a quantitative approach this study means to deal with the issue with a qualitative perspective. Indeed twelve semi-structured interviews will support the findings. On top of those practical and physical interviews some theoretical knowledge will be added to the construction of the argument especially to bring a framework that shows the importance of all types of value creation (functional emotional and social). The findings of the thesis emphasize the facts already proven by other researchers; value creation is fundamental to make consumers care about CSR. However the study will show how much skepticism towards CSR can impact negatively consumers purchasing behavior. The research will help companies implementing more successful CSR strategy and develop new solutions to reach customers and influence their purchasing behavior through the creation of value for them.
|
|
Coarse-grained particles conveying along a pipe bed
Vlasák, Pavel ; Chára, Zdeněk ; Konfršt, Jiří ; Kysela, Bohuš
The paper describes the results of a flow visualisation of model coarse-grained fully stratified particle-water mixtures. Investigation was focussed on study of the particle behaviour and carrier liquid and conveyed particles local velocities. Glass balls and washed graded pebble gravel of mean diameter of 6 mm were conveyed by water in a horizontal smooth pipe loop with a transparent pipe viewing section of inner diameter 40 mm. Particle movement along the pipe invert and particulate stationary bed, created by two layers of spherical particles of the same size as the conveyed particles, was studied. The effect of stationary bed on local velocity values of the carrier liquid and conveyed particles were determined. It was conducted that the maximum liquid velocity is significantly shifted from pipe centre to a higher position in the flow pattern with stationary bed.
|
|
Pavement skid resistance and Skid Resistance Index
Nekulová, Pavla ; Šachlová, Zora (referee) ; Kudrna, Jan (advisor)
This diploma thesis deals with the relation between the longitudinal friction coefficient dependence on measuring speed and the value of road surface macrotexture MPD. Results of longitudinal friction coefficient and value of MPD measurement on 73 sections are included in this thesis. The results were compared by regression analysis and its outcome was used for determination of formula that enable calculation of longitudinal friction coefficient for any operating speed when longitudinal friction coefficient for 60 km/h and value of macrotexture are known. The evaluation scale for skid resistance index (SRI) was also determined in this thesis. It could be used for evaluation of skid resistance independently of the type of device used for friction coefficient measurement.
|
|
Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.
|
|
Nutritional analysis and optimization of breeding of selected species of edible insects under conditions of the Czech Republic with regard to human health
Adámková, Anna ; Kouřimská, Lenka (advisor)
All over the world, the edible insects are considered a highly nutritious food with high protein and fat content. However, the nutritional value of insect is not constant. It can be affected by species, developmental stage, rearing technology or nutrition.
Therefore, this thesis was aimed at obtaining the selected nutritional value of edible insects. Analyses were focused on the determination of the crude protein content, fat content, fatty acid profile and sterols in selected species of edible insects, which can be commonly reared in the Czech Republic. At the same time we also analysed samples of insects reared on the island of Sumatra to evaluate the influence of the climate on the nutritional value. The main aim of the thesis was the determination of optimal breeding conditions, developmental stages and feed rations for obtaining good production of insects with nutritional properties suitable for human nutrition. The analyses showed a high nutritional value of selected insect species, but also confirmed the significant differences in the content of individual nutrients between different species depending on the climate conditions and developmental stage. Comparing the fat and crude protein content in edible insects and other conventional sources of meat it has been found, that the examined insect is similar to beef concerning the fat and crude protein content. The results obtained are the basis for determining the appropriate rearing conditions and developmental stages for obtaining insect with the desired nutritional properties for human nutrition.
|
|
Population genetic analysis of Old Kladruber horse
Vostrá Vydrová, Hana ; Majzlík, Ivan (advisor) ; Karel, Karel (referee)
The Old Kladruber horse, along with the Lipizzaner horse, Andalusian horse and Lusitano horse, is of the original Italo-Spanish type. The Old Kladruber horse is kept in two colour varieties (grey and black). Because the population is closed, there is a concern about the loss of genetic variation. The genetic diversity and population structure were analysed in the Old Kladruber horse breed based on the pedigree information of animals that were registered in the Studbook to identify factors that may have affected the genetic variability of the breed. Pedigree records collected from 1729 to 2013 contained information on 7971 animals that were used in the analyses. The pedigree depth was up to 33 generations, with an average of 15.1 complete generations. The effective number of founders and ancestors contributing to the current genetic pool was 92.69 and 17.16, respectively. The average values of the inbreeding coefficient were as follows: 13% (with a maximum value of 29%) for the reference population (individuals that can currently take part in reproduction, n=612), 11% for the grey variety (with a maximum value of 25%) and 15% for the black variety (with a maximum value of 29%). The proportion of inbred animals was high (99%). The average rate of inbreeding in the reference population was 1%: 0.8% for the grey variety and 1.1% for the black variety, and the respective estimates of the effective population sizes were 52 for the reference population, 62 for the grey variety and 45 for the black variety. The estimated percentage of genetic diversity lost due to non-random mating within subpopulations and the reference population was 1.0, 1.0 and 1.2%, respectively. The total loss of genetic diversity in the reference population, in the grey variety and in the black variety was 11%, 13% and 17%, respectively.
|
|
Appraisal and assessment of development options immovable manufacturing facility open market value
Hanzlovská, Nikola ; Gardášová, Alena (referee) ; Hlavinková, Vítězslava (advisor)
The main objective of this diploma thesis is to determine the usual price for a manufacturing facility, by using valuation methods. A secondary aim was to determine best possible use of the building and the development possibilities, according to the results from valuation. Diploma thesis is divided to theoretical and practical part. In theoretical part are detailed valuation methods divided to two main parts, the valuation by price regulation and the market valuation. In the beginning the pratical part describes the location and property. Furthermore I applied valuation method for manufacturing complex. At the conclusion is recapitulation and analysis of results, where are considered diferences and the usual price is set. The last chapter is devoted to the best use of complex and consideration of development possibilities.
|
|
Assessing the benefits of reconversion on the value of church building
Strnková, Markéta ; Klika, Pavel (referee) ; Hlavinková, Vítězslava (advisor)
The thesis focus on the reconversion church building in the selected location. At the beginning of the work described church buildings and their influence on the surrounding, the structure of the Roman Catholic Church and the development of church property during the history. This is complemented by theoretical terms and possible methods of valuing cultural monument. The practical part deals with the reconversion church building, specifically the Dominican monastery in Znojmo. Based on an analysis of Znojmo and monastery was suggesting possible use of the monastery. Of these, two variants were selected and were compared. Of these two options, one was chosen as the most suitable option for future use.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
guest ::
