|
CRISIS INTERVENTION AS ONE OF THE POSIBILITIES OF HEALTH AND SOCIAL HELP FOR PEOPLE IN NEED
KŘENKOVÁ, Eva
Nowadays crisis has been an everyday occurrence in our world. It´s mostly caused by the loss of a very close person, loss of a job or by social status decline, health problems, etc. Nobody (not even a specialist) can tell anyone when to get into crisis and when not. Crisis represents an enormous psychical and often physical strain. One of the possibilities to help people in crisis is the crisis intervention. Crisis intervention is a procedure suitable for people who for the first time face a hard situation. Desired effect of crisis intervention is the strenghtening of client´s ability to deal with difficult problem either on the basis of strategies proved before or on the basis of newly created procedures. Together with that client´s selfevaluation should improve and unpleasant emotional attendance of the crisis should be reduced. Un this work was to learn the knowledgeability about the possibilities of using crisis intervention services among southbohemian district citizens. My bachelor thesis can be used for making the population acquainted with types of crisis intervention and with possibilities of their usage.
|
|
Implementation of Lean Six Sigma in Catering
Marek, Petr ; Martínez, Felipe (advisor) ; Mejdrech, Vlastimil (referee)
The aim of the thesis is to suggest recommendation to optimize and increase efficiency in a process of catering ordering in a company Express Deli by using methods of lean six sigma. The work is built as real project od lean six sigma using some methods of the methodology lean six sigma. In the theoretical part of the thesis, methods of lean six sigma used in the practical part, are described. These methods are mainly methods of process mapping. Each chapter is a step of DMAIC methodology. Core part of the thesis is process mapping at a customer side, so in the other part there are all recommendations directly focused on customers requirements. The results of the work are suggested proposals for process improvement. Some of them were implemented during the project.
|
|
The influence of media to the public administration
Foglová, Leona ; Louda, Tomáš (advisor) ; Matula, Miloš (referee)
The bachelor thesis deals with influence of media to public opinion. The main goal of this thesis is to verify or to disprove the hypothesis of the influence of media to the public administration. The quantitative sociological research is applied for finding results of defined hypothesis. The hypothesis says: media influence public opinion and public administration. The other goal of this thesis is to discovery if factors like gender, age or educational background influence how society perceives impact of media. The questionnaire is divided into five age categories and each of them has a different number of respondents. For that reason we can not compare the results but only speculate. After evaluation and analysis of the survey is the hypothesis accepted and these factors are commented.
|
|
Technological Foresight: Analysis of Potentially Disruptive Future Technologies in Banking
Dunovský, Tomáš ; Jiřinová, Kateřina (advisor) ; Žďára, Tomáš (referee)
This Master's Thesis is focused on technological foresight in the banking industry in Europe. It includes consecutive two parts. The first one is theoretical and focuses on defining the terms necessary for the development of technological foresight, stated criteria, triggers and terms necessary for the development of analysis of potential technological problems and their solutions. The second part is practical and it includes the technological foresight, analysis of trends that will disrupt banking and introduce a vision of personal banking product of the future. A comparison of product vision to current trends and if those can be considered disruptive follow this part. The last part of the thesis includes diffusion criteria of innovation as according to the Rogers's Model, a set of triggers after which the defined investment fund can consider an investment into technology, and an analysis of potential technological issues with proposed solutions.
|
|
Serverless single page application in JavaScript
Zikmund, Marian ; Pecinovský, Rudolf (advisor) ; Suchan, Vladimír (referee)
The goal of this thesis is to design and develop a framework for building modern single- page application in the JavaScript programming language and describe this approach to development. The work also contains the documentation for a more comfortable use and customization. The content is divided into eight chapters. The introduction is followed by the retrieval of information resources, including the specifics of the JavaScript programming language and explanation of the formation of single-page application. The description of the basic principles of their functioning, motivation and justification, when and why this approach is appropriate is also included. The work is primarily focused on the issue of single-page application, for which the use of the JavaScript programming language is crucial. For this reason, this work provides a whole chapter about this programming language, also including a description of its history and role in the context of others. Below are the common characteristics of single-page applications frameworks, built on top of the library ReactJS, whose formation is engaged in the following chapter. The developed framework also contains the user guide. The practical outcome of this work is an open source framework for creating serverless single-page applications, which is due to its architecture and documentation appropriately adaptable.
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
Determinants of Industrialization in sub-Saharan Africa and Possibilities for their Development
Sejkora, Jiří ; Jiránková, Martina (advisor) ; Šaroch, Stanislav (referee) ; Fárek, Jiří (referee) ; Adamcová, Lenka (referee)
Sub-Saharan economies need structural changes that would enhance their productivity, increase economic growth and development. In this regard, industrialization plays a key role. Using regression analysis, the aim of this dissertation thesis is to identify main factors (determinants) of industrialization in sub-Saharan Africa. The results indicate that infrastructure and economy size (measured by population size) represent main determinants of industrialization in the region. The thesis also deals with possibilities for development of those determinants. Case study of infrastructure development in Mauritius emphasizes privatization, cooperation with external subjects etc. Negative consequences of small economy size can be overcome by preferential trade agreements (under certain circumstances), as shown by analysis of the three smallest economies in the region.
|
|
Creation of the Enterprise Architecture model according to the TOGAF framework
Čapek, Jan ; Doucek, Petr (advisor) ; Zeman, Petr (referee)
The present diploma thesis aims at introducing the Enterprise Architecture and creating an abstract model of a company. The primary focus is on application and process layers as defined in the architecture framework TOGAF. The thesis is divided into theoretical and practical part. The theoretical chapter starts with a business model analysis which means to describe mission vision and companys values as a part of the strategy framework. Furthermore the business processes are described in the latter part of this section. This chapter attempts to explain how to map a business process and to categorize it by nature and maturity level. Penultimate chapter introduces the Enterprise Architecture in general. This section includes arguments as to why the companies should be concerned with the Enterprise Architecture advantages of the Enterprise Architecture implementation into the companys documentation relationship of companys core business and IT and examples of the Enterprise Architecture frameworks. The last chapter deals with the TOGAF framework where Architecture Development Method is described. This means how Enterprise Architecture model is created and how to implement changes into the layers according to the TOGAF framework. Simultaneously the last section of this chapter describes the reference models which provide graphical overview of all abstractions layers. The practical part of the thesis elaborates on the theoretical part using the Architecture Development Method process in order to create the Enterprise Architecture model according to TOGAF framework. Same as the theoretical part it only focuses on the application and process layer. Firstly the business model is decomposed into vision mission and companys values to the companys strategy and business goals in order to grasp further understanding of business processes detailed description. Subsequently the abovementioned aspects are recomposed to create process map which provides the management overview. The application layer undergoes the same process; nonetheless the process map is replaced by information system description and reference model creation. Once the models are created the thesis compares them with the business and strategic goals. The benefit brought by this thesis is critical evaluation of current status to propose changes to achieve target architacture according business and strategic goals established by management.
|
|
Analysing company's behaviour and communication on social networks
Němec, Milan ; Molnár, Zdeněk (advisor) ; Jelínek, Ivan (referee)
This thesis focuses on measuring company´s communication and behaviour on social networks. To capture the interaction between the company and its users the thesis uses web analytics tools. Therefore, the main objective of the thesis is analysis of these tools. To achieve this goal, the thesis characterizes social networks and their marketing opportunities for business promotion. Thanks to this, needs of using these tools is identified. The needs are: competitive analysis, optimizing communication, measuring achievement of objectives or detection competitive viral content. Research questions were determined and then analysis tools found answers to research questions. It was found that the tools provide various views of data and create a complete system for measuring and analysing behaviour and communication companies on social networks. The results were validated in a case study focused on the Facebook profile of the University of Economics in Prague. The study analysed the interaction profile of the school and its users and compared with others schools. In the results the analysis tools are validated and it is designed recommendation for improve engagement. This thesis revealed strengths and weaknesses of tools for measuring company´s communication and behaviour on social networks. It was found that these tools have wide range of use. They can be used for understanding the company's profile, its users, for purposes of competitive analysis, monitor corporate goals and optimize communications on social networks.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|