|
Influence of grain orientation on threshold values of short fatigue cracks
Náhlík, Luboš ; Knésl, Zdeněk
The influence of a grain boundary on the propagation of a fatigue crack is studied. To this aim the grain boundary is considered as an interface between two different materials with their elastic constants depending on the orientation of the adjacent grains. The main goal is to estimate the threshold value of a microstructurally short fatigue crack propagating through the grain boundary. The corresponding threshold values are calculated as a function of material parameters of grains. Corresponding modelling have been performed by combination of analytical and numerical approach. For numerical calculations the finite element system ANSYS has been used. The model describes only one of many aspects of short fatigue crack behaviour and the results obtained contribute to a better understanding of microstuctural aspects of short fatigue crack growth.
|
|
Empirical analysis of Okun’s law in Iceland
Zajíček, Zdeněk ; Slaný, Martin (advisor) ; Chytilová, Helena (referee)
This thesis deals with empirical analysis of Okuns law in Iceland. Okuns hypothesis of negative relationship between real GDP and the rate of unemployment is being tested on two models, difference and gap, using OLS estimation. Also there are two filtration methods used (Hodrick-Prescott and Baxter-King) for gap model estimation. The results of all models showed weak relationship of variables, but proved the hypothesis. In the following part, the same procedure is being used on Finlands data, to get comparison of coefficients. Results for Finland showed weaker bond of variables than in Iceland, but the Okuns hypothesis still holds. Last part is focused on finding the sensitivity of rate of unemployment to changes in added value of each economical sector in Iceland using the production approach model. This model gave inconclusive results due to insufficient data available.
|
|
Application of the Balanced Scorecard in the company ELLA-CS
Cwierz, Jan ; Neumaierová, Inka (advisor) ; Beneš, Oldřich (referee)
Balanced Scorecard belongs to the most prominent managerial tools for performance measurement and strategy management. Aim of this thesis is to describe BSC with emphasis to small and medium enterprises using literature review. Additional supporting tools for strategy formulation are included as well. BSC is then proposed for implementation in privately owned small enterprise in the sector of medical devices. Based on the thorough analysis of the company and its environmental factors operational and strategical performance gaps are identified. Such gaps are then addressed by means of BSC including financial, customer, internal processes and learning and growth perspective. Despite some limitations inherent to SMEs in general introduction of BSC is feasible and could be of value to all company stakeholders.
|
|
The Value of CSR for Czech Consumers
Faradji, Elise ; Štěrbová, Ludmila (advisor) ; Seror, Patricia (referee)
Nowadays consumers purchasing behavior is influenced by new factors such as the social and environmental implication of companies. This is why Corporate Social Responsibility (CSR) is a growing trend which companies need to look after carefully. However implementing an efficient CSR strategy is a complex process for corporations; especially since the core concept of CSR remain quite blurry. The goal of this study is to analyze the perception of consumers towards CSR to find out about the value creation that CSR produce for consumers and its impact on their purchasing behavior. This paper will ultimately help companies to implement their CSR strategy more efficiently. This study aims to contribute by conducting an in-depth analysis of consumers attitudes and behavior towards CSR. If most of researchers are using a quantitative approach this study means to deal with the issue with a qualitative perspective. Indeed twelve semi-structured interviews will support the findings. On top of those practical and physical interviews some theoretical knowledge will be added to the construction of the argument especially to bring a framework that shows the importance of all types of value creation (functional emotional and social). The findings of the thesis emphasize the facts already proven by other researchers; value creation is fundamental to make consumers care about CSR. However the study will show how much skepticism towards CSR can impact negatively consumers purchasing behavior. The research will help companies implementing more successful CSR strategy and develop new solutions to reach customers and influence their purchasing behavior through the creation of value for them.
|
|
Valuation of company Lesní společnost Broumov Holding, a. s.
Sichrovský, Chananel ; Štamfestová, Petra (advisor) ; Toušek, Jan (referee)
The aim of this master thesis is to estimate the value of the company Lesní společnost Broumov Holding, a. s. as of the valuation date 01/01/2016. The thesis consists of two main parts, theoretically-methodological and related practical part. For accomplishing the objective, the strategical and financial analysis were made, also the main generators of the value were identified and scheduled and the financial plan was composed. The valuation itself was realized by three different methods that were afterwards calculated together which resulted into final estimation of the company's value, that reaches 147 024 thousand Czech crowns. The thesis is usable as a full overview of the company's situation and may be also helpful to the owners as a base for price negotiations, in case of potential investor's interest in buying it.
|
|
Global value chains in the coffee industry focused on Vietnam
Klumparová, Adéla ; Vlčková, Jana (advisor) ; Hnát, Pavel (referee)
Aim of this diploma thesis is to describe functioning of global coffee value chains and this knowledge then apply to the coffee industry in Vietnam which serves as a case study. The introductory chapter focuses firstly on institutional background of value chains, processes and management processes used in the agricultural industry. The thesis also contains analysis of global coffee value chain, including the identification of entities engaged in the chain and their contribution to the creation of added value. Next chapter describes the development of the world coffee market and production of the world's major producers and exporters of coffee. The thesis also deals with the topic of economic and social sustainability and the impact of global value chains on the environment. Final part of the thesis concentrates on the position of the coffee industry in Vietnam, its structure and development over the past 40 years. Attention is paid also to a problematic position of small growers or to the opportunities of the development of the local coffee industry.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Valuation of the company Tank ONO, s.r.o.
Novák, Petr ; Strouhal, Jiří (advisor) ; Smrčka, Luboš (referee)
The output of this Master´s Thesis on the theme "Valuation of the company Tank ONO, s.r.o." is the estimation of market value of company as at the date of December 31, 2014, with the goal of selling off the company to a hypothetical general investor in the future. The theoretical part includes metodology and instruments used for company valuation, eg definition of main terms, explanation of valuation proces and methods, that are recognised as valid by specialised public. Afterwards, the second part (eg practical part) is aimed at applying the metodology in practice. First, the valuated company is shortly introduced and it is followed by financial and strategic analysis in order to evaluate the financial soundness and assess the perspective for company future. The conclusions of the above analysis are used for elaborating the value drivers and complex financial plan, that is followed by valuation of Tank ONO, s.r.o. In light of the company capital structure, there is chosen DCF equity method for final valuation, in this Thesis.
|
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.
|
guest ::
