National Repository of Grey Literature 32,883 records found  1 - 10nextend  jump to record: Search took 0.76 seconds. 

Study of behavior of concrete and cement based composite materials exposed to high temperatures
Bodnárová, L. ; Horák, D. ; Válek, J. ; Hela, R. ; Sitek, Libor
The paper describes possibilities of observation of behaviour of concrete and cement based composite material exposed to high temperatures. Nowadays, for large-scale tests of behaviour of concrete exposed to high temperatures, testing devices of certified fire testing stations in the Czech Republic and surrounding states are used. These tests are quite expensive. For experimental verification of smaller test specimens, a testing device was built at the Technical University in Brno, where tests of thermal loading of concrete tests specimens of various sizes can be carried out (dimensions up to 800 x 800 x 800 mm or slabs up to 1100 mm of length). The testing device opens new ways of observation of behaviour of concrete and cement based composite materials exposed to high temperatures as well as preparation of specimens for observation of interaction of water jet and concrete degraded by action of high temperatures.
Fulltext: content.csg - Download fulltextDOC
Plný tet: UGN_0398264 - Download fulltextDOC

Application of art therapy elements for students at high special school (practical)
Koubská, Patricie ; Valešová Malecová, Barbara (advisor) ; Šiška, Jan (referee)
Application of art therapy elements for students at high special school (practical) The theme of this bachelor thesis is the use of art therapy procedure for pupils from practical two-year high school. The aim of this thesis is to consider the possibilities of using elements of group art therapy for the development of self-knowledge, communication, for strengthening of prosocial ties and increasing of a sense of group belonging. In the narrower sense, art therapy is underwood as a fine art therapy. Theoretical basis of the thesis will be the methods of art therapy, their possibilities and procedures, developmental aspects of maturing, specifics of maturing for pupils with handicaps (mental retardation issues, specific disorders of behavior problems of pupils with social and physical handicaps). In the practical part of the thesis there is described the use of these methods in my own art lessons.

Products with Protected Designations of the European Union and Their Position in Regional Tourism
Licková, Kamila ; Kalábová, Markéta (advisor) ; Abrhám, Josef (referee)
The master thesis deals with products with protected designations of the European Union. The main objective of the master thesis is to evaluate the importance of the chosen product with protected designation of the EU in regional tourism and analyse the perception of the product by a producer and by tourists. The sub-objective is the description of the European system of food labelling. The thesis is divided into five main chapters. The first part explains basic concepts which are related to the thesis. The second chapter introduces the best known food quality labels. Greater attention is devoted to the description of the food protection system of the EU. The third chapter deals with the characteristics of the chosen region Beskydy-Wallachia. The second part of this chapter is focused on the chosen protected product Štramberské uši. The forth chapter includes a structured interview with the chosen producer of Štramberské uši and a survey research, which was conducted in two phases. The last chapter contains the evaluation of the implemented survey. The main finding of this thesis is the fact that a relatively high percentage of respondents know the product Štramberské uši. An interesting finding is the fact that only a small portion of them know that the product Štramberské uši is the holder of the protected designation of the European Union. The chosen producer of Štramberské uši sees the main benefit of the label in greater publicity. Among problems he ranks the enforceability of the label and lack of general promotion of Štramberské uši.

Information systems security penetration testing
Klíma, Tomáš ; Doucek, Petr (advisor) ; Čermák, Igor (referee) ; Čapek, Jan (referee) ; Štubňa, Ivan (referee)
The aim of this dissertation thesis is to develop new methodology of information systems penetration testing based on analysis of current methodologies and the role of penetration tests in context of IS/IT governance. Integral part of this aim is evaluation of the methodology. The first part of the thesis is devoted to the presentation of history and current state of research in selected area, definiton of basic terms and introduction of role of the penetration tests. This part is followed by the review of relevant sources and comparative study of current methodologies with a goal to identify their weaknesses. Results from this study are further used as a basis for new methodology development. Classification of IS penetration tests types and testing scenarios are also included. The second part includes design of new methodology, at first its history, structure and principles are presented, then its framework is decribed in high level of detail. In the third part the reader can find (theoretical and practical) validation. The biggest scientific contribution is the methodology itself focused on managment of penetration tests (which is the area currently not sufficiently descibed). Secondary contribution is the extensive review and the comparative analysis of current methodologies. Contribution to the economic and technical (practical) application we can mainly see in the development of new methodology which enables companies to improve management of penetration tests (especially planning, operational management and implementation of countermeasures).

STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.

Micro-electromembrane extraction across multiple aqueous and organic phases for selective pretreatment of raw biological samples
Kubáň, Pavel ; Boček, Petr ; Seip, K. F. ; Gjelstad, A. ; Pedersen-Bjergaard, S.
Micro-electromembrane extraction (μ-EME) across multiple aqueous and organic\nsolutions was developed for selective extractions of various analytes from untreated\nbiological samples. The novel approach requires μL volumes of samples and organic\nsolvents, which form consecutive immiscible plugs in a transparent polymeric capillary\nand the extraction process is accelerated by application of d.c. voltage. Number of the\nplugs, their composition, volume and sequence in the extraction capillary can be chosen\nspecifically for each particular application and high variability and selectivity of the\nextraction process can be achieved. In this contribution, we demonstrate suitability of\na five-phase μ-EME system for simultaneous extractions of cations and anions from\nurine and for selective extractions of basic analytes based on their acid-base strength\nfrom plasma.

Highly sensitive analysis of chlorophenols and sulfonamides in waters by electrophoretic focusion on inverse electromigration dispersion gradient with ESI-MS detection
Malá, Zdeňka ; Gebauer, Petr ; Boček, Petr
This work presents a new methodology for high-sensitivity analyses by capillary\nelectrophoresis (CE) with electrospray-ionization mass spectrometric (ESI-MS)\ndetection, based on electrophoretic focusing on an inverse electromigration dispersion\n(EMD) gradient. The technique is based on a robust electrolyte system providing a\ngradient of required properties, suitable for routine analyses of trace amounts of weak\nacids with pKa values between approx. 6.5 and 9. Examples analyses of several\nchlorophenols and sulfonamides are presented, with LODs around 3x10-9 M for spiked\ndrinking water without any sample pretreatment.

ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n

Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_22316111113040 - Download fulltextPDF

Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.