| |
|
Application of art therapy elements for students at high special school (practical)
Koubská, Patricie ; Valešová Malecová, Barbara (advisor) ; Šiška, Jan (referee)
Application of art therapy elements for students at high special school (practical) The theme of this bachelor thesis is the use of art therapy procedure for pupils from practical two-year high school. The aim of this thesis is to consider the possibilities of using elements of group art therapy for the development of self-knowledge, communication, for strengthening of prosocial ties and increasing of a sense of group belonging. In the narrower sense, art therapy is underwood as a fine art therapy. Theoretical basis of the thesis will be the methods of art therapy, their possibilities and procedures, developmental aspects of maturing, specifics of maturing for pupils with handicaps (mental retardation issues, specific disorders of behavior problems of pupils with social and physical handicaps). In the practical part of the thesis there is described the use of these methods in my own art lessons.
|
|
Information systems security penetration testing
Klíma, Tomáš ; Doucek, Petr (advisor) ; Čermák, Igor (referee) ; Čapek, Jan (referee) ; Štubňa, Ivan (referee)
The aim of this dissertation thesis is to develop new methodology of information systems penetration testing based on analysis of current methodologies and the role of penetration tests in context of IS/IT governance. Integral part of this aim is evaluation of the methodology. The first part of the thesis is devoted to the presentation of history and current state of research in selected area, definiton of basic terms and introduction of role of the penetration tests. This part is followed by the review of relevant sources and comparative study of current methodologies with a goal to identify their weaknesses. Results from this study are further used as a basis for new methodology development. Classification of IS penetration tests types and testing scenarios are also included. The second part includes design of new methodology, at first its history, structure and principles are presented, then its framework is decribed in high level of detail. In the third part the reader can find (theoretical and practical) validation. The biggest scientific contribution is the methodology itself focused on managment of penetration tests (which is the area currently not sufficiently descibed). Secondary contribution is the extensive review and the comparative analysis of current methodologies. Contribution to the economic and technical (practical) application we can mainly see in the development of new methodology which enables companies to improve management of penetration tests (especially planning, operational management and implementation of countermeasures).
|
|
Impact of low oil and natural gas prices on the economy of Qatar since 2014
Šamánek, Ondřej ; Stuchlíková, Zuzana (advisor) ; Hasík, Gabriel (referee)
The bachelor thesis examines the impact of the oil and gas prices slump, which befell the world in 2014, on the economy of Qatar. The main objective of the thesis is to evaluate if and to what extend the price collapse influenced the relevant economic indicators and behaviour of the state and companies active in the affected field. The selected objective is examined using the method of data comparison, namely before and after the price slump, and with the help of the case study, in which the qatari company operating in the oil and gas is examined. From the conducted analysis it is possible to conclude that Qatar was directly influenced by the oil and gas prices collapse: its GDP slumped, fiscal deficit increased. The analysed company also experienced troubles caused by low prices: one year after the price slump, total amount of assigned tenders to company decreased substantially and historically high number of tenders was cancelled. Conclusions deriving from the thesis might be applied to other oil and gas export economies in the Persian Gulf, for fundamental traits of such economies are shared with the economy of Qatar.
|
|
A Comparison of Preconditioning Methods for Saddle Point Problems with an Application to Porous Media Flow Problems
Axelsson, Owe ; Blaheta, Radim ; Hasal, Martin
The paper overviews and compares some block preconditioners for the solution of saddle point systems, especially systems arising from the Brinkman model of porous media flow. The considered preconditioners involve different Schur complements as inverse free Schur complement in HSS (Hermitian - Skew Hermitian Splitting preconditioner), Schur complement to the velocity matrix and finally Schur complement to a regularization block in the augmented matrix preconditioner. The inverses appearing in most of the considered Schur complements are approximated by simple sparse approximation techniques as element-by-element and Frobenius norm minimization approaches. A special interest is devoted to problems involving various Darcy, Stokes and Brinkman flow regions, the efficiency of preconditioners in this case is demonstrated by some numerical experiments.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.
|
|
Nutritional analysis and optimization of breeding of selected species of edible insects under conditions of the Czech Republic with regard to human health
Adámková, Anna ; Kouřimská, Lenka (advisor)
All over the world, the edible insects are considered a highly nutritious food with high protein and fat content. However, the nutritional value of insect is not constant. It can be affected by species, developmental stage, rearing technology or nutrition.
Therefore, this thesis was aimed at obtaining the selected nutritional value of edible insects. Analyses were focused on the determination of the crude protein content, fat content, fatty acid profile and sterols in selected species of edible insects, which can be commonly reared in the Czech Republic. At the same time we also analysed samples of insects reared on the island of Sumatra to evaluate the influence of the climate on the nutritional value. The main aim of the thesis was the determination of optimal breeding conditions, developmental stages and feed rations for obtaining good production of insects with nutritional properties suitable for human nutrition. The analyses showed a high nutritional value of selected insect species, but also confirmed the significant differences in the content of individual nutrients between different species depending on the climate conditions and developmental stage. Comparing the fat and crude protein content in edible insects and other conventional sources of meat it has been found, that the examined insect is similar to beef concerning the fat and crude protein content. The results obtained are the basis for determining the appropriate rearing conditions and developmental stages for obtaining insect with the desired nutritional properties for human nutrition.
|
|
The use of biomass ash
Ochecová, Pavla ; Tlustoš, Pavel (advisor) ; Radim, Radim (referee)
One of the most frequently used sources of renewable energy is biomass, mainly wood biomass. Incineration is the most common technology utilizing the energy from biomass to produce heat. A byproduct of these technologies is ash, whose composition depends on the feedstock composition and the incineration technologies. Due to the high content of valuable nutrients in ash, one of the suitable option for ash utilization seems to be application into agricultural or forestry land. Therefore, it is necessary to test response of soils and plants and look for the most suitable combination of soil additive (biomass ash), and plants. Experimental part of PhD thesis was divided into the incubation experiment and the vegetation pot experiments. The incubation experiment: The efficiency of ash addition at two application rates was tested for nutrients enrichment in different soils within period of 56 days. The vegetation pot experiments: The two plants Triticum aestivum L: (three-year experiment) and Lolium perenne L. (one-year experiment) were planted in the 5L pots. Soils were treated with ash or ash combinated by superphoshate and flue gas desulfurization gypsum. For both plants, we evaluated the plant growth, biomass production and content of macro, micro and toxic elements in the biomass and in the soils.
|
guest ::
