|
|
Thermography in engineering
Koten, Jakub ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This work deals with non-contact measurement of surface temperatures. The aim of the first part is to explain basic terms, principles and ways of measuring temperature. Furthermore, there is an overview of thermal imagining cameras usable in industry. In the practical part there is a theoretically suggested experiment, which monitors the dependence of the surface temperature on the size of the cross-section of the workpiece during the turning under unchanged cutting conditions. Experimental measurements are executed with using thermocamera ThermaCAM SC 200 and they are evaluated in software called Researcher.
|
|
|
Use of thermographic methods for diagnostics of concrete bridges
Janků, Michal ; Hobst, Leonard (referee) ; Matula, Radek (referee) ; Cikrle, Petr (advisor)
This dissertation is focused on the research of the applicability of the thermographic method in the diagnosis of concrete bridges in the Czech Republic. The theoretical part characterizes selected defects of concrete structures and the principle of their detection. The practical part describes the measurements made in the laboratory on the test specimen and the field on the concrete bridge. Most attention is paid to infrared thermography, ground-penetrating radar and ultrasonic pulse-echo method. Based on the results of the dissertation, recommendations for the use of the thermographic test method in practice were developed.
|
|
|
The use of thermovision technology in output control of power supplies
Rejžek, Jan ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
The aim of the thesis is to clarify the issue of non-contact surface temperature measurement with a focus on the thermal imaging cameras as a modern representative of pyrometers and thermovision technology used in the output control of power supply. To obtain the corresponding results of temperature control, it is necessary to know the exact values of emissivity of the measured materials. The experimental part of this thesis is focused on detection of emissivity of power supply parts.
|
|
|
IR camera data processing
Malík, Dalibor ; Petyovský, Petr (referee) ; Richter, Miloslav (advisor)
The aim of this master’s thesis is to give information about the thermo camera measurement with error minimization. The basic concepts of thermography are explained with an implementation of postprocesing technique which uses graphically modified thermogram back projected to the scene. This is closely related to the scene design, calibration of thermal camera with projector, image rectification, thermogram processing with highlighting of interesting information and implementation of control elements as the user interface. The results obtained are analyzed and re-evaluated.
|
|
|
Thermal measurement
Zachar, Martin ; Lisý, Martin (referee) ; Kracík, Petr (advisor)
This thesis deals with theory of thermal measurement with both physical as well as technical side. Thesis describes basic methodics of thermal measurment and further compares few different thermographic cameras at the current market. Main part of the thesis is focusing on a script, that has been created in program Matlab, serving for analysis of a series of thermographic pictures capturing verticaly placed pipes, following by registration of founded temperatures to Excel and drawing of diagrams of the change of average temperature along pipe and histograms of temperatures of given pictures.
|
|
|
Temperature Measurement in Technical Diagnostics
Szmek, Tomáš ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
The purpose of this bachelor’s thesis is to familiarize a reader with possibilities of temperature measurement along with constructions and functions of particular measuring instruments and to present their positive and negative aspects. Both basic contact thermometers used in common life and complex systems (thermovision) employed in the most demanding industrial application are described here. The thesis depicts temperature as a diagnostic value according to which the causes of machinery failures are easily detected and subsequent accidents prevented.
|
|
|
Using the infrared camera in the measuring technique
Bayer, Robert ; Šedivá, Soňa (referee) ; Bejček, Ludvík (advisor)
The goal of this thesis is to get acquainted with contactless methods of measuring a temperature and give the reader an idea of it. Next goal is to master the working with IR visual display terminal FLUKE Ti55FT (and program equipment SmartView) a describe it to the reader too. Last goal is to translate the booklet "Introdution to Thermography Principles", published by FLUKE company, which will be enclosed in electronic form to the thesis in the appendix.
|
|
|
Temperature measurement in electric machines
Halfar, Ivo ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
The bachelor's thesis Temperature measurement in electric machines deals with beginning and exuding of the heat of electric motors and measuring of the temperature. The temperature is one of the most important values in diagnostic. High temperature could damage an isolation and it could tend to destroy of the whole machine. The temperature influences their magnetic properties on motors with permanent magnets. If you reach the Curie temperature it could come to its demagnetisation. Measuring of the temperature is important to verify allowable warming of motor or more precisely its spooling. The measuring of the temperature is needed for making motors with minimum of charges and its worth at the end. We could use two methods for measuring the temperature. It is contact and noncontact method. Warming and decomposition of the temperatures it is possible to appoint also with help of theoretic computations which are getting of the method of final elements. A lot of computer programs is using this method. Because of the existence of many sorts of electric motors, one of the viewpoints is the principle of working, another one is the construction. I concentrate on problems of asynchronous motors. In this bachelors thesis I have done theoretical calculation and contact and noncontact method of measuring of warming of the asynchronous motor.
|
|
|
Intelligent Thermal Camera with Intruder Detection
Mysza, Róbert ; Drahanský, Martin (referee) ; Goldmann, Tomáš (advisor)
Thermovision technology is becoming more and more widespread in monitoring and security applications. This bachelor thesis deals with its usage for object detection and describes methods and algorithms capable to do this. I also studied factors, which effects the human skin temperature. The design of the device, which sends images to the server and is able to detect an intruder by his temperature is part of this thesis. The last chapter contains evaluation of tests for detection reliability.
|
|
|
Thermal imagers in technical diagnosis
Haltuf, Martin ; Šedivá, Soňa (referee) ; Bejček, Ludvík (advisor)
In this thesis is dealed the technical term diagnostic with Fluke Ti55 thermo imager. In the introduction of description is analyzed noncontact temperature measurement including principle, uncertainties measurement and measurement system. In other parts of the work is focused on thermal imaging, termogram, description Fluke Ti55 termo imager and measurement of mechanical stress. The concluding part of the description and processing of measurements, including their evaluation.
|
guest ::
