|
|
Slab bridge
Malý, Jan ; Muroň, Vlastimil (referee) ; Panáček, Josef (advisor)
Bachelor's thesis deals with the design of a road bridge over the Volyňka river. Three bridging variants were proposed, of which the bridge variant, whose supporting structure consists of an additional pre-stressed concrete slab, was chosen for subsequent detailed assessment. The variation with prestressed prefabricated girders with composite slab is chosen for more detailed assessment. Detailed structural design is made and selected parts of the construction are checked for ultimate and serviceability limit state by Eurocode. Calculation of load is made by manual way and then by exact way with program Scia Engineer 22. The results from both calculation methods are then compared. Detailed drawings and visualization are made as well.
|
|
|
Architectural and technological project of residential house Ždírec
Šimonová, Aneta ; Kolečkářová, Barbara (referee) ; Kantová, Radka (advisor)
Subject of the master's thesis is project planning and management of construction of apartment building in Ždírci nad Doubravou. There is prepared a technical report on the structural and technological project, situation with broder relations roadways, time and financial plan, studies the implementation of major technological stages, project construction site, design of building machines and mechanisms, plan for securing materiál resources, technological regulation for contact thermal insulation system, inspection and test plans contact thermal insulation system, budget of the main object, network graph of the construction process.
|
|
|
Construction Technological Project of Outbuildings it manufacturing facility in Kromeriz
Patloka, Jiří ; Kopecký, Lukáš (referee) ; Diaz, Yvetta (advisor)
The thesis contains the main part of the building and technological project of outbuildings it manufacturing facility. There is prepared a technical report on the structural and technological project, situation with broder relations roadways, time and financial plan, studies the implementation of major technological stages, project construction site, design of building machines and mechanisms, plan for securing materiál resources, technological regulation for warm flat roof and saddle truss roof, inspection and test plans, budget and health and safety at the technological stage roofed.
|
|
|
Administrative center Hodonin - building and technological project
Gaďurek, Robin ; Nečasová, Barbora (referee) ; Vlčková, Jitka Laura (advisor)
The content of the thesis is the implementation of the three-story brick office building with an operation in Hodonin. Text section contains the technical report on the structural and technological project technical report transport relations, study implementation of major technological stages of building SO 01, project construction site, the design of the main building machines and mechanisms, technological regulation, inspection and test plan and a plan of safety and health at work for making the 1st floor ceiling structure. The appendix section includes drawings and installations situation Minor main building structure, calculation of stripping reinforced concrete structures, timing and technology standard of the main building structure and time and financial plan construction-object.
|
|
|
The Study of Purchase in the Distribution Organization
Grund, David ; Tesař, Rostislav (referee) ; Jurová, Marie (advisor)
The diploma thesis focuses on the process of analysis of the current state of logistics of the purchasing process at Tourbus, a.s. Its main target is set to identificate the areas in the purchasing processes of the company, which can be rationalized and streamlined. The goal of this thesis is the improvement of the current state of logistics, in order for the company to be able to maintain its competitiveness in the market.
|
|
|
Grade-separated interchange Mohelnice-north - Study
Lukáš, Radek ; Hájek, Jaromír (referee) ; Radimský, Michal (advisor)
This diploma thesis deals with the proposal of an alternative solution to the intersection of Mohelnice North crossroads. It compares the current junction design, which is considered inappropriate, with two new proposals for circular intersections. The aim of the thesis is to propose the resultant junction cheaper, smaller and simpler for users.
|
|
|
Design of the Doubravník water supply system
Vaníček, Petr ; Kučera, Tomáš (referee) ; Ručka, Jan (advisor)
The aim of this project is the study of technical solution of water line extension into the selected part of consumption area. The study includes specific water line design in the Doubravník village, the design of laying water line in a cross-section considering existing networks and the vertical level of water line in the mentioned location. It was prepared simplified hydraulic analysis to assess the hydraulic conditions in the water network. Project was processed by current applicable laws and standards. The design of water line eliminates water supply shortage in the area of interest and it will alow to connecting of new-built house into the water main.
|
|
|
Evaluation of user interface COMES
Škoda, Pavel ; Štohl, Radek (referee) ; Pásek, Jan (advisor)
The bachelor thesis deals with analysis of user interface of system COMES. Its aim is to create a study with user feedback regarding this system. Then the system COMES can be improved based on obtained information. Firstly, there are written information about designing the correct user-friendly interface focusing primarily on easy operation and communication with user. Subsequently methods of measuring user interface are divided and described. In the second part, questionnaire was made up. It helps users test system COMES and evaluates this information. The most important part of this thesis is the last chapter. It describes the possible improvements of the existing system which eliminate identified deficiencies.
|
|
|
Production of aquariums Brno Pavlica
Čadová, Veronika ; Vostrejž, Dušan (referee) ; Boleslavská, Yvona (advisor) ; Bečkovský, David (advisor)
The topic of the bachelor thesis is a design of an industrial building for the Akvária Pavlica company. The design deals with documentation for obtaining a building permit and documentation of construction. The project is based on a previously developed architectural study for the subject AG035 and contruction study for the subject AG036. The assigned building parcel is located in the west part of Brno Horní Heršpice and slopes slightly to the north side. The parcel is situated near the local road of the Sokolova street. The main access to the parcel is also from the same street. The layout design of the plot contains a parking lot for employees and visitors, an seperated area for trucks and a garden area. At the moment the parcel mostly fits into the brownfields. The design of the new building consists of 3 functional units - exhibition space/showroom, facilities for administration and production space. The basic idea was to separate the units for the public from employees and vice versa. For this reason, the production and exhibition unit is located in "stand-alone" functioning units. The administration is located on them as the 2nd floor. That creates a walk - through area to the garden and the main entrance to the building. The construction system is a steel frame structure based on the reinforced concrete step footing foundations covered by flat and sloped roofs. The steel frame structure is supplemented by Ytong blocks. The Trimoterm vertical panels are used throughout the building as a facade covering. The mainly used materials for construction are steel, glass, concrete and metal. The main aim of the design was to create a well-functioning spatially separated but overall compact space, which will ensure both quality product production, as well as a pleasant working space for employees and a functional space for public visitors.
|
|
|
Realization preparation University Centre in Zlín
Rokosová, Iva ; Kučera, Zdeněk (referee) ; Kantová, Radka (advisor)
Diploma thesis is focused on the preparation of the implementation of the University Centre in Zlín. The work includes building technology study and subsequent construction technology project. In this thesis, the aim was to determine the time, financial and material demands of the project, choose the optimum process of construction, ensure BOZP, make the proposal buildingsite for the individual stages, the calculation of costs of site preparation and select adequate mechanical the assembly. It was drafted fire assessments of buildings.
|
guest ::
