|
|
Supermarket in Olomouc
Brodecká, Denisa ; Bukovská, Pavla (referee) ; Pilgr, Milan (advisor)
The assigment for bachelor thesis was design and check of load-bearing steel structure in Olomouc in Moravia. The ground dimension are 24 x 40 m, height is 10 metres. The building construction is designed as a single hall with double-pitch roof and a slope 9°. Main frame is based on plate frame with anxial range 5 m. Transverse bracing ensure the rigidity of the structure from the plane of the frame. Wall cladding is storage on column and roof cladding is on purlins. The materiál used is steel S235. Bachelor thesis includes the assesment of the main load bearing structure elements, design of the selected details and their drawing solutions.
|
|
|
Preparation of realization of completion of clinical hematology, University Hospital Brno
Průcha, Aleš ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is a solution of the extension of clinical hematology of the Faculty Hospital Brno. The thesis deals with the technological regulation for steel construction, coupled ceiling concrete slab with other topics including an inspection-check plan, a time schedule for carcass, time and financial schedule for structures and an item budget. In addition, this work includes the coordination site-layout of the construction with wider transport relations, mechanical assembly, the principles of the organization of site equipment and occupational safety and health risks. Finally this thesis contains several assessments for cranes, scheme of principles of fixing steel columns into structure, scheme of laying building envelope, LEED, site equipment financial assessment.
|
|
|
Design of steel-concrete composite structure of road box girder bridge on by-road of Bludov
Kuba, Michal ; Marván, David (referee) ; Nečesal, Petr (advisor)
The aim of this work is design and assessment of the box-girder road bridge on by-road of Bludov. Bridge is designed as composite steel concrete bridge with 5 spans with distances between supports of 31,25 m; 40,0 m; 60,0 m; 60,0 m and 40,35 m. Main bearing structure is designed as open steel box-girder with reinforced concrete deck. Box girder is braced with longitudinal and transversal bracings. Main structure is separated for each traffic direction. The bridge crosses river Morava and railway in 2nd and 3rd span, respectively. The category of road I/44 is S 21,5/100. The height of steel box girder is designed as 2,5 m. Bridge will be built by incremental launching method, with in-situ casted concrete deck afterwards. The bridge is designed according to current standards. Supporting elements are designed from steel of class S 355 and concrete of class C35/45.
|
|
| |
|
|
Steel Structure of Sport Hall
Hrabovská, Kristýna ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
The principal aim of this thesis is to design and assess the steel structure of a new sports hall located in Slavkov u Brna. The hall should be used mainly for common collective ball sports. This fact places minimal requirements on the dimensions of the building. The hall has rectangular shape with dimensions of 61x30 meters, height of 12.5 meters and a saddle roof with angle of slope 10°. Its main frame is created of truss with pin-supported beams. The spatial rigidity of the structure is secured by longitudinal and sway bracings. The bars of the steel structure consist of rolled sections. The cladding of hall made of panels manufactured by Kingspan. Panels are supported by wall girts and roof purlins. A permanent load on the building is considered due to the weight of the steel structure and panels and variable load is considered due to the snow load and wind load. Steel S235 is used as the construction material.
|
|
|
Static design of the structure composed of combination of steel and structural glass
Potůčková, Simona ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design the load-bearing construction system and its cladding made of a combination of steel and structural glass and to verify its sufficient resistance. The object has rectangular floor plan with dimensions of 7,5x10,5 m and and its total height is 24,5 m. The building is located at the suburban area of the city Ostrava, precisely Ostrava Poruba. The construction is composed of a ground floor and six upper floors. The main load-bearing system consists of steel frame formed by six tubular columns connected beams and sway bracings ensuring the spatial rigidity of the structure. The object was designed according to currently valid standards using ULS and SLS verification.
|
|
|
Car Showroom
Smrčka, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design and appreciation steel load-bearing structure of motor show. The object is situated in Brno. The Structure consist of tubes and rolling sections. The breadth of construction is 36,5m, lenght 42m and height in the heihest point is 13,2m. The structrure is consists of three parts. Show room, offices and workshop. The height of show room is 20m, offices 8,5m and workshop 8m. The show room consist of arched truss girder. The distance of each cross links is 6 m. Structural design were perfomered by Scia Engineer 2017 and hand computation.
|
|
|
Storage area with administrative building
Šesták, Tomáš ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focused on the design and elaboration of project documentation for the purpose of a storage area with an administrative building, consisting of the premises SO 01 - storage hall and SO 02 - administrative building. Objects are located on parcels no. 4006/16, 4006/17, 4006/18, 4006/19, 4006/23, 4006/24, 4006/26, 4006/27, 4006/28, 4006/29, 4006/30, 4006/31, 4006/32, in the cadastre unit Dolní Bojanovice. They are located on an investor's land. Traffic connection is provided by the exit from the car park on the local road. All engineering infrastructure engineering networks are located near the site. The design of the building respects the local zoning plan. Project documentation is prepared in accordance with the current wording of applicable laws, decrees and standards. The project solves the structure functionally divided into objects SO 01 and SO 02, which are both operationally and structurally connected. The construction of objects is statically independent. The object SO 01 is designed for the storage of building material intended for storage in dry rooms. In addition to the storage space there is the air-conditioning machine room. The SO 02 facility serves administrative and staffing facilities. In the basement of the building there are rooms of technical background and archives. The SO 01 is designed as a full-metal mounted object with a counter roof and foundation pads. The design system of the SO 01 object is columnar with steel columns. The SO 02 building is designed from a wall construction system made of aerated concrete blocks with reinforced concrete ceilings, base strips and a flat roof. The SO 01 has a 65.5x20.2 m ground plan. The perimeter shell of the building consists of assembled sandwich panels with a core of pure material. The largest ground plan dimensions of the so 02 are 26.75x10.35 m. The perimeter shell is made up of 375 mm piece concrete blocks with a 150 mm contact system.
|
|
|
Assembly hall
Beran, Miroslav ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The diploma thesis deals with the design and assessment of the steel supporting structure of the production hall. The transverse dimension of the hall is 21,00 m, the longitudinal dimension is 70,00 m, the height of the hall is 17,56 m. S355 steel is used as the main supporting material. The supporting part of the hall consists of columns on which is placed a truss and two crane tracks at two height levels. Three different types of purlins and pillars are considered in the design of the steel structure. For the selected variant, a static calculation of the main bearing elements, including selected details, is drawn up and drawings are drawn up.
|
|
|
Steel Structure of a Sports Hall
Smrčka, Václav ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The bachelor’s deal with supporting with steel structure sports hall. As the mean material of bering elements was designet steel S235. The building has an rectangular shape with dimensions of 36x48 m. Clear hight at the highest point is 15,3 m. The supporting structure consist of colums and arched truss girder. The distance of each cross links sis 6 m. In the structure design is deal with four variant transversál frames. For the chosen variant is further processed a static calculation of the main structrual elements including selected details and drawing documentation.
|
guest ::
