|
|
Developing Modular Information System with Domain-Driven Design
Škrášek, Michael ; Rychlý, Marek (referee) ; Burget, Radek (advisor)
Tato diplomová práce se zabývá monolitickými architekturami a doménově řízeným návrhem (angl. Domain-Driven Design) a jejich kombinací při vývoji modulárních informačních systémů. Poskytuje ucelený přehled principů doménově řízeného návrhu a různých monolitických architektur, včetně čisté architektury a modulární monolitické architektury. Poté demonstruje použití těchto vzorů a architektur na ukázkové aplikaci. Práce nabízí pohled na vývoj informačních systémů s využitím populárních přístupů, jako jsou CQRS, čistá architecktura, doménově řízený přístup, modulární monolit a další.
|
|
|
Apartment building
Zápotočná, Jana ; Pilný, Ondřej (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the development of project documentation for the construction of a residential building with almost zero energy consumption. The main objectives of this work include the design of the layout, construction, and material solutions. The building of the apartment building is a detached new building, which has one underground floor with garages. In total the building contains 6 studios and 20 apartment units. The fourth floor is partially stepped with access to the flat roof. The building is roofed with two types of flat roofs and one gable roof with 20° pitch. The new building is located in a relatively sloping terrain of the urban area Kňažia, Dolný Kubín, on the plot KN-C 2110/10, which allowed barrier-free access to the building from the garage and at the same time and through the main entrance located on the landing. The facade of the apartment building is designed as ETICS with white RAL 9016 plaster. In the places of loggias and balconies there is a brick facing and in the place of the staircase proposed ventilated facade with cladding with corrugated metal in RAL7016. The windows are designed as plastic, on the exterior side in anthracite RAL 7016 and on the interior side in grey RAL 9006. The residential building is based on a reinforced concrete slab foundation. The basement construction system is combined with perimeter reinforced concrete walls and internal load-bearing columns. In the above-ground floors it is already a transverse wall system, formed by reinforced concrete walls. The construction of the gable roof is made of wooden glued trusses with metal roofing. This bachelor thesis also deals with the assessment of the building in terms of fire safety, thermal engineering, acoustics, glazing and day lighting.
|
|
|
New synagogue Jablonec nad Nisou
Adamčíková, Barbara ; Štolfa, Jozef (referee) ; Dulenčín, Juraj (advisor)
This thesis focuses on the design of a new synagogue in Jablonec nad Nisou, which serves not only as a religious space but also as a social and community center for the local, not exclusively Jewish, community. The project aimed to create a multifunctional building that respects the historical significance of the original site while providing a modern and functional environment for spiritual, cultural, and social activities. The architectural solution of the building utilizes modern materials and technologies, including ventilated facades with illuminated glass panels and stainless steel elements, which ensure an aesthetic look and long-term sustainability of the building. In addition to the synagogue, the project includes a kosher restaurant, community spaces, and a shared underground parking lot, all contributing to the revitalization of the urban environment. The project placed maximum emphasis on integrating the building into the historical context of the city and its abstract connection to the neighboring Glass and Costume Jewelry Museum. Great emphasis was also placed on its functional connection with the surrounding environment. The project was developed considering the specific needs of the Jewish community and includes features that support spiritual and community life, such as prayer spaces oriented towards Jerusalem, the community center itself with a library, and outdoor relaxation areas.
|
|
|
Commercial center Miris Garden in Croatia
Žilková, Monika ; Doležal, Ondřej (referee) ; Novák, Petr (advisor)
The subject of the bachelor thesis is preparation of project documentation for building permits and part of the documentation for the implementation of construction based on the assignment, which was provided in the course BGA032 - Architectural Design Studio 4. The topic of the study is a design of a new building of the commercial center Miris Garden in Croatia near the town Starigrad. The building is to form the main point of the newly built resort on the sloping coast of the Adriatic Sea. The commercial center is to fulfill a commercial function (with several smaller shops and gastro businesses) and in part of the building also an administrative function, where offices are available for the management of the center and for tenants. The three buildings forming a unified whole are designed in the shape of two central hexagons, creating a space imitating a shopping street. It then culminates in a square with a view of the sea. The center has a total of three floors, which, however, are fitted into the terrain in such a way that when viewed towards the sea it looks like a single-storey building, so it does not disturb the views of the surrounding villas. The new building will be located in an open landscape, so its construction and operation will not disturb any nearby residents in any way.
|
|
|
Construction Project for Implementation of Multifunctional Building in Brno
Čačaný, Lukáš ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
The main subject of this diploma thesis is a construction technological project of preparation and realization multifunctional building in Brno on Trugeněvova street. It is a new construction of the main building. It provides a technical report on the construction technology project, transport relations for the transport of materials and machinery to the construction site, following technical report of construction site equipment, construction technology study, design of machinery and last but not least elaboration of technological regulation for the execution of monolithic structures. Furthermore, the chapters on health and safety protection at work on the construction site, as well as the LEED certification system and the financial and time plan of the selected stage are elaborated.
|
|
|
Architecture of socially excluded - Higher security prison in Brno
Prajsová, Andrea ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The subject of the diploma thesis is to study architectural security prison in Brno. Prisons are devices filling the disqualification of persons who have committed anti-social acts of a society that considers freedom and freedom of movement for one of the highest social values. The site is located in the outskirts of Brno, Brno-Slatina. The main idea is the use of the buildings that already by the expression appropriate for the application. There are prison blocks that are strictly brutalism and on the other hand, there are buildings that its minimalist ventilated façade suggests a more liberal regime. The whole composition is supported park with a chapel, in which each view change regularity rigorous imprisonment.
|
|
|
New higher security prison in Brno
Sáňka, Robert ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The subject of the diploma thesis is to architectural study of new security prison in Brno. Prisons are devices filling the disqualification of persons who have committed anti-social acts of a society that considers freedom and freedom of movement for one of the highest social values. The site is located in Propojený obrázek nelze zo brazit. Příslušný soub or byl pravděpodobně přesunut, přejmenován nebo odstraněn . Ověřte, zda propojení odkazuje na sp ráv ný so ubor a umístění. the outskirts of Brno, Brno-Slatina. The main idea is to use clear communication connections between the buildings, which are structured according to the appropriate method of use; its structurally functional organization and clearly indicate its operating mode. Harmony of the whole is then expressed by a suitable composition of objects and surfaces areal vegetation, where the area according to the scheme uniformly distributed and completed at the close of the outdoor sports area.
|
|
|
The design of multi-storey building
Hardubej, Martin ; Girgle, František (referee) ; Švaříčková, Ivana (advisor)
The aim of the thesis is the design and assessment of selected elements of a new build multi-storey office building. The supporting structure of monolithic reinforced concrete skeleton is modeled SCIA Engineer and burdened set load cases and combinations. The outputs of the internal forces of the calculation program are dimensioned selected elements. Selected elements include locally supported slab, columns, column shoes, basement wall and footing still. The thesis is selected reinforced concrete elements assessed on the ultimate limit state. The output of this work is static calculation of individual elements. Another part of the output consists of drawings solved elements.
|
|
|
Slovanic secondary school in Olomouc – Gross upper building construction
Homolová, Sandra ; Bravenec, Roman (referee) ; Novotný, Michal (advisor)
The subject of my thesis is the technology of gross upper building construction of Slovanic secondary school in Olomouc. The building is made of monolithic reinforced concrete structures. The work includes technological specification of execution monolithic structure, technical report, construction site, design of mechanical assembly, scheduling, bill of quantities, budget of the building, inspection and test plan and health and safety at work.
|
|
|
Home Social Services Technology coarse upper stage of construction
Krajcar, Tomáš ; Rotrekl, Ivo (referee) ; Henková, Svatava (advisor)
The subjekt of my thesis is the technology of gross upper building construction of social building in Valašské Meziříčí. The work includes technological specification for masony and monolithic constructions, technical report, construction site, design of mechanical assembly, scheduling, bill of quantities, budget of the building, inspection and test plan and health and safety at work.
|
guest ::
