|
|
Cable-supported bridge
Adler, Filip ; Glovina, Filip (referee) ; Nečas, Radim (advisor)
The subject of this master thesis is to design a pedestrian bridge supported by cables. There are three variants of studies created for this case and for most suitable one, all documentations were produced. The primary focus of this work is on static design solution with an output of several drawings. Static model for results from load cases included construction stages and was created in Midas Civil. Design and checks were performed by hand calculations, complemented by checks of several sections by IDEA StatiCa software. Analysis and calculations are compliant to up-to-date codes and respect the fundamentals of analysis due to limit states.
|
|
|
Bridge over the Jihlava river
Hibš, Daniel ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
This bachelor thesis deals with the design of a new bridge construction over the Jihlava river in Luka nad Jihlavou. The bridge is located on the road III/4044 at stationing 0,033 km. The bridge evidence number is 4044-1. Three studies were worked out in this thesis. First variant of load-bearing structure projects prestressed beams with composite slab, the next variant suggests dual girder construction and the third variant is prestressed concrete slab. The first study was selected – the bridge made of post-tensioned prefabricated beams with composited reinforced concrete slab. The calculation was carried out in the SCIA Engineer program, and selected outputs were checked by manual calculation. In addition, the time dependent analysis with construction phases was performed.
|
|
|
Bridge over the I/55 road and railway line
Gross, Tomáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The main aim of the diploma thesis is a design of two bridges on D1 highway (Říkovice – Přerov). Structural system of these two bridges is a seven spans continuous beam. The bridges span the rail track and road I/35. The structural system of these two bridges is identical. The preliminary design is processed in two options. The first one considers the use of post-tensioned pre-casted beams PETRA with cast-in place cross beams and composite bridge deck. The second draft considers the use of two slab-beam with the cross beams. Effects of loads were calculated in SCIA Engineer program. The build-up phases were assessed by TDA method. The assessment of the structure was made according to EC.
|
|
|
Bridge structure over the valley
Hroudná, Denisa ; Kostka, Vojtěch (referee) ; Koláček, Jan (advisor)
The subject of this diploma thesis is the design of post-tensioned road bridge over the valley. Two preliminary studies have been proposed and one of them was selected for more detailed processing. The selected variant is a box girder with a constant height 2,5 m. The construction id divided into five span and its total lenght is 240 m Span length of construction is 18,0 m. The construction was assessed for ultimate and serviceability limit state acording to standarts and regulation. Drawings and vizualizations ard parts of the diploma thesis.
|
|
|
Highway bridge over wide wally
Mertová, Eliška ; Smejkal, Ing David (referee) ; Klusáček, Ladislav (advisor)
The aim of this diploma thesis was the design of three possible variants, how to span the wide and deep valley with a bridge. After an evaluation, situation of the highway on the only wide load-bearing structure which is constituted by a box girder with transverse cantilevers supported by prefabricated bar braces, was chosen as an optimal solving. The load- bearing structure made of post- tensioned concrete is going to be incrementally launched and be supported by one-column pillars along an axis of the motorway. The work is composed of a detailed design of this preferred variant, which is processed according to the ultimate and serviceability limit state including the construction stage analysis of the bridge by the construction technology by an incremental launching method.
|
|
|
Bridge ower the Opavice river
Tang, Minh Phú ; Russnák, Adam (referee) ; Panáček, Josef (advisor)
The diploma thesis deals with the design of a road bridge on the I/57 expressway over the relocation of the cycle path, the Opavice river and the local road, which involves the relocation of the access to the waterworks. The bridge structure is located in the territory of the town of Krnov. A study of the area's bridges is part of the project and three studies have been prepared. Study A was chosen for detailed processing. It is a continuous box girder bridge with three spans. The superstructure is designed as a monolithic, post-tensioned structure. A sliding girder is being investigated for the structure's construction. Scia Engineer 18.1 is used to do the load effects computation. Only the consequences of vertical load effects have been addressed, with no consideration of horizontal load effects. The structure was evaluated using limit states, taking into account the impact of construction on its design.
|
|
|
Bridge over railway line and river
Kalísová, Eva ; Zobek, Svatopluk (referee) ; Panáček, Josef (advisor)
The diploma thesis deals with the design of a bridge in Most. It bridges the railway line and the river Bílina. Three possible variants have been proposed. One of the variants has been selected and further elaborated. The solved variant was an arc with a suspended pre-stressed bridge beam. The supporting element is a reinforced concrete backbone. The construction is built on a ring. Static analysis partly includes the effect of phased construction. The design was assessed according to EN.
|
|
| |
|
|
Design of highway bridge
Luberová, Lucie ; Formánek, Ing Martin (referee) ; Zich, Miloš (advisor)
The subject of this bachelo r’s thesis is the design a new supporting bridge construction in Prešovský kraj, district Levoča the territory of Slovak Republic. This object is located on the highway D 26,5/120, at kilometer 13,499 795 and communication of third class – 131-00 bridges. The objective is the design of a perpendicular four-span construction, which is proposed in three variants. The first variant is a chamber girder with inclined walls from post-tensioned concrete height 2,480 m. The second variant is composed of two beamed cross-section and the third variant is composed of one beamed cross-section. For detailed assessment the first variant was chosen with a length of bridging of 166,000 m. The calculation of load effects is done by software Scia Engineer and compared with a manual calculation according to current standards. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.
|
|
|
Design of bridge on highway D1
Kopřiva, Jan ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The purpose of this thesis is to design bridge over the valley on D1 highway. Length of the structure is 170 meters. Main structure is four spans prestressed beam. The length of fields is 36+48+48+36 meters. The structure is examined in all phases of construction, including the operating phase according to valid standards.
|
guest ::
