|
|
Design of Non-Contact Temperature Measurement Method for Blast Furnace Lava
Mlejnek, David ; Šedivá, Soňa (referee) ; Fialka, Jiří (advisor)
The Bachelor Thesis focuses on theoretical design of the system for contactless measurement of temperature of lava flowing out of the blast furnace for the factory of the company Isover (Saint-Gobain) in Častolovice. The initial part of the Thesis contains the theoretical analysis on electromagnetic radiation, infrared light of electromagnetic spectrum and experimental temperature measurement using contactless meters. The subsequent parts of the Thesis focus on description of the blast furnace workplace where the theoretical design of the new contactless systém of temperature measurement shall take place, description of the current temperature measurement system, research of the contactless temperature sensor market and a design of the new systém of contactless measurement of lava temperature.
|
|
|
Thermal measurement
Zachar, Martin ; Lisý, Martin (referee) ; Kracík, Petr (advisor)
This thesis deals with theory of thermal measurement with both physical as well as technical side. Thesis describes basic methodics of thermal measurment and further compares few different thermographic cameras at the current market. Main part of the thesis is focusing on a script, that has been created in program Matlab, serving for analysis of a series of thermographic pictures capturing verticaly placed pipes, following by registration of founded temperatures to Excel and drawing of diagrams of the change of average temperature along pipe and histograms of temperatures of given pictures.
|
|
|
Diagnostics of current path of high-current apparatuses
Váša, Lukáš ; Bušov, Bohuslav (referee) ; Šimek, David (advisor)
Bachelor’s thesis is focused on the theoretical analysis of methods of technical diagnostics with focus on high-current devices. An overview of the methods used in technical practice is elaborated. In addition, the thesis deals with the strain of current carrying path, subsequently the work focuses on the thermal stress of parts of the current carrying path and its temperature rise. Methods of diagnostics by measuring transient resistance and methods of measurement of temperatures are described and each of the methods’ advantages and disadvantages are stated. The practical part is focused on the diagnotics of the switch disconnector and the disconnector by measurement of the transient resistances of all contacts of the current carrying paths and the following measurement and evaluation of temperature rise of the components by thermal imaging camera. Adjustments to the disconnector leading to financial savings are suggested on basis of these measurements.
|
|
|
Non-contact measurement of surface temperatures during machining of metal materials
Trojan, Jiří ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This Master’s thesis deals with non-contact methods of surface temperature with machining metal materials. This work contains summary of basic terms and description of thermodynamics laws. Furthermore, the work present criteria for selection suitable measuring equipment. In the second part of this work is described experiment focused on drilling technology and measurement dependence of temperature on different cutting speed for different drilling approaches. At the end are presented the results.
|
|
|
Temperature measurement using the pyrometers
Holík, Denis ; Kaňa, Václav (referee) ; Podaný, Kamil (advisor)
The thesis is pursuing research and analysis of information about function principles of pyrometers. Complex problematic of particular types of pyrometers and options of practical use is analysed. Basic errors of contactless temperature measurement are also included. Parameters of particular types of pyrometers are processed in the form of a table.
|
|
|
Measurement of thermal field in electric machines
Dostálek, Martin ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
Diagnosis temperature is one of the most important disciplines. We meet it in everyday life, but it is very important for all sectors of industry. This is a measurement providing an immediate state of the measured object. Contact measurement of different temperature sensors and contactless measurement using thermal imagers. The important part is the measurement of temperature rise of induction motor. Part of the work deals with losses in the electric motor. These losses are converted into heat, which affects from various parts of the machine. Correct identification of the temperature field is important in helping to design the cooling system of the instrument. Virtually the data obtained are compared with theoretical data. We will capture part of the device and realize thermal simulations in a suitable simulation program. We propose modifying the cooling machine and the resulting data from the simulation compares.
|
|
|
Utilization of infrared camera for temperature measurement of electrical machines
Líbal, Jan ; Aubrecht, Vladimír (referee) ; Kuchyňková, Hana (advisor)
The master‘s thesis deals with utilization of infrared camera for temperature measurement of electrical machines. The first part describes non-contact temperature measuring, the second part describes principle of sensors that evaluate quantity of incident infrared radiation. In the next part there is termovision camera SAT-HY 6800 presented and the instructional manual for SAT Report computer programme created. This computer programme is used for analyzing of termovision pictures from the SAT-HY 6800 termovison camera. The chapter 7 describes temperature measuring of one-phase asynchronous motor type J22TO484. The chapter 8 describes temperature measuring of semiconductor components of EC motor G6 series. Both of these motors are produced by ATAS elektromotory Náchod a.s. The last part of the thesis describes creation of animation of one-phase asynchronous motor type J22TO455. The animation was created in 3ds Max computer programme.
|
|
|
The heat build-up of tap-off units of busbar trunking system in relationship to their surfacing.
Forejtník, Jan ; Radil, Lukáš (referee) ; Foral, Štěpán (advisor)
This study is dedicated to the effect of surface modification on lid warming of busbar trunking system BD2 which is manufactured by Siemens company in Mohelnice town (CZ). By using experimental methods, it investigates heat transfer by radiation and natural convection. It evaluates which type of surface modification is more effective by transfer heat. This study uses a method of emisivity comparison and a procedure given in standards for heat up test afterwards. It led to recognition, that various colour shades used on busbar system have similar high emissivity. Smooth colour spraying transfers heat a bit more effectively than rough colour spraying. Outputs of supplementary measurements give basis for numerical simulations in SolidWorks software. Numerical analysis assists to interpret results, for example by sensitivity study of heat transfer depending on emissivity.
|
|
|
Measurement of surface temperatures in mechanical engineering
Stránský, Marek ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
This work deals with contact and non-contact methods of surface temperature measurement. The work contains a list and formulations of basic terms and laws of thermodynamics. Furthermore, the work deals with the description and comparison of the properties and use of certain devices for contact and non-contact surface temperature measurement. The experimental part is focused on dependence of the turning speed on the turning knife thermal stress. Subsurface thermocouples, surface thermocouples and thermovision were used for the temperature detection. The subsurface temperatures were afterwards used (as data inputs) for the inverse calculation of surface temperatures. All results obtained were then compared to each other.
|
|
|
Thermal measurement of the building
Kozák, Karol ; Mauder, Tomáš (referee) ; Štětina, Josef (advisor)
Infrared measurements, as a method of contactless temperature measurement, has spread rapidly in various branches of industry. Nowadays, in era of saving energy and financial resources spent on building heating, it has become an inherent part of revisions and controls of excessive heat transfer over thermal bridges. The aim of this bachelor's thesis in it's first part is to describe the theory of infrared measurement and heat transfer of the building and the second part is focused on application of theoretical knowledge to evaluate the results of practical measurements of buildings A2, A3, A4 and A5 on Faculty of Mechanical Engineering, Brno University of Technology, which is regulated by the technical standard ČSN EN 13187.
|
guest ::
