|
|
Analysis of extensions for mounting a harvester head on an excavator
Popela, Dominik ; Struhal, Vít (referee) ; Mergl, Václav (advisor)
The introduction of the thesis deals with a complete research of individual components that need to be mounted on an excavator to make it possible to use it for forest harvest. An integral part of the research is a detailed market research, thanks to which various designs of manufactured attachments were analyzed. The research part is followed by a description of the selected components of the assembly, which form an excavator attachment for its use in forest harvest. The following chapter already describes the author's own designs of the extensions design in three variants. The key part of the thesis is dedicated to dynamic simulation of the harvesting process and strength simulations of the designed extensions. Using dynamic simulation, the course of the force effects acting on the attachment pin, which arise during the process of felling a tree, was determined. The maximum force effects were determined from the results of the dynamic simulation, which were then applied in the strength analysis. The finite element method was chosen for the calculation of the strength analysis. The final form of the individual design variants of the extensions arose from the performed strength analyses. The conclusion of the thesis evaluates the achieved results and a detailed comparison of the created design variants of the extensions.
|
|
|
Dynamic model of a heat pump with plate heat exchangers and ecological refrigerant
Strmiska, Pavel ; Řehák Kopečková, Barbora (referee) ; Pokorný, Jan (advisor)
For the optimization of a heat pump, there is a need to possess its dynamic model. One of the freely available tools for creating such a model is the language Modelica and its open-source compiler OpenModelica. The thesis aims to research options for creating dynamic models of refrigeration circuits with the ecological refrigerant R290 and its components in Modelica, to create the circuit and subsequently validate it using previously measured data. Models of basic components of heat pumps - compressor, condenser, evaporator and expansion valve are created in a way described in the thesis. A simplified model of a refrigerant loop is also created
|
|
|
Dynamically balanced resonance adhesive tester
Jandásek, Martin ; Růžička, Bronislav (referee) ; Mazůrek, Ivan (advisor)
This diploma thesis is dedicated to the development of mobile resonance-adhesion tester TriTec. The aim of this thesis is to improve the parameters of the tester in comparison to the previous version of tester, especially to minimize the vibrations of the tester while running without load, and to the make long-distance transportation of tester easier. The first part of thesis was aimed on history of development of TriTec tester, causes of it´s problems and on analysis of vibration minimization possibilities. As a best solution is considered a rotational balance mechanism, which was designed in next part of thesis. After that a new front wheel drive and an user interface conception were designed. The modified tester reaches all the deserved parameters and is able to compete static resonance-adhesion testers by it´s lower price and high mobility.
|
|
|
Skip loader NKR130V
Derka, Lukáš ; Ospalík, Zdeněk (referee) ; Kašpárek, Jaroslav (advisor)
This master’s thesis deals with a strength analysis of the main frame and loading arms of a skip loader. For a calculation of load states is used a dynamic simulation and its results are used as a boundary conditions for the strength analysis using finite element method (FEM). The results of the analysis is evaluated and on theirs basis are designed a construction improvements. The part of the thesis is drawings documentation of the construction improvements.
|
|
|
The trailer for a chipper
Poul, Ondřej ; Robotka, Tomáš (referee) ; Kašpárek, Jaroslav (advisor)
The goal of this thesis is structural design of the trailer for a LASKI chippers and to create a construction drawings. Important part is information about legislation rules, which this trailer has to fulfill. The aim of this work is to do a dynamic simulation using multi-body system. Results of this simulation are used for a stress analysis witch using a fine element method.
|
|
|
Design of Coriolis flowmeter
Krejčí, Martin ; Zikmund, Vladimír (referee) ; Dvořáček, Jiří (advisor)
This thesis deals with the structural design of mass flowmeter based on the principle of the Coriolis force. The introduction explains how the Coriolis flowmeter operates, what types of flowmeters are currently being produced and what are the important parameters. There are appointed some of the principles that must be followed to the meter working correctly. It contains a proposal design of flowmeter for pipes DN80 and. Includes drawings for this design.
|
|
|
Trailer frame VARIANT 200 for transport cabel spools
Blažek, Jaroslav ; Kašpárek, Jaroslav (referee) ; Kašpárek, Jaroslav (advisor)
The aim of this thesis is an analysis of the construction of a cable trailer VARIANT 200. For the calculation of load states was used a multi body system in program MSC.ADAMS. The results from these calculations were used as lifting conditions for strength control with finite element method (FEM). All acquired results were analysed and according to them changes were made to the frame construction. Part of this thesis contains drawings documenting the above mentioned changes.
|
|
| |
|
|
Trailer frame VARIANT 350 for transport cabel spools
Weingärtner, Jan ; Kašpárek, Jaroslav (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis deals with the solution of the trailer frame Variant 350 for transport of cable reels. The aim of this work is to drive a dynamic simulation of a cable lift generated by the track and in specific places to find this track burdensome conditions that affect the design of the frame. According to these states gained strenght to control the finite element method, implement and then modify the design and then create construction drawings prepared.
|
|
|
Simulation of CNC machine tool spindle in ADAMS software
Pham, Jakub ; Holub, Michal (referee) ; Tůma, Jiří (advisor)
The bachelor thesis deals with the design of a simulation model of a CNC machine tool in MSC ADAMS software. Nowadays, simulations have become an integral part of every development process, as they offer a cost-effective alternative to classical machine development involving prototyping. Within machine tools, dynamic simulation of machine nodes is one of the unexplored areas. The aim of this work is to verify their functionality and reliability in this area. Within the scope of the bachelor thesis, a research on dynamic system simulations, the finite element method and the simulation software MSC Adams and Ansys has been carried out. In the practical part, the spindle loading of the MCV 754 Quick machine tool was designed. Subsequently, the model geometry and boundary conditions were determined and the spindle was simulated during the cutting process in MSC ADAMS. The simulation results were verified by both analytical calculation and experimental measurements on the machine. Furthermore, the concept of further development of the model within the framework of cosimulation was presented. Finally, all output parameters were compared and evaluated.
|
guest ::
