|
|
Vehicle Hydropneumatic Unit
Koudelka, Roman ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
This diploma thesis, following the bachelor's thesis, is devoted to the gas-liquid unit of a vehicle, as the central element of hydropneumatic suspension. The aim is to dimension and construct this component and integrate it together with other elements into a complex suspension system. Based on possible forms listed in the research section, regarding to current development trends, the form of the unit is chosen. The practical part begins with simulations comparing a hydropneumatic with a conventional suspension system. After solving this issue, it is possible to proceed to the dimensioning of the basic parameters of the unit and then to its construction, respecting the relevant strength calculations. The last step is to build a conceptual design of the whole hydropneumatic suspension system.
|
|
|
Surface treatments of internal combustion engines cylinders
Malec, Petr ; Raffai, Peter (referee) ; Maršálek, Ondřej (advisor)
This bachelor thesis is a professional research, which describes the most common methods of surface treatments of modern internal combustion engines cylinders. The work consists of the distribution of the species changes, their use and justification of their application. It also describes the technology of individual surfaces, their coating and finishing operations to achieve the best results of sliding surface.
|
|
|
Proposal for the automation of the production line for the grinding of compressor part
Jirák, David ; Jakoubek, Jaroslav (referee) ; Kubík, Roman (advisor)
The topic of this diploma thesis was chosen by Valeo Compressor Europe Company. The aim is to propose an automation of the production line for grinding of a compressor part. The part is internally termed “Cylinder,” and it is an integral part of a new type of a rotational compressor for air-conditioning units of automobiles. The diploma thesis includes a complete proposal for the automation of workplace. The current state, the proposal of the concept, technical specification of the project, and the choice of a suitable supplier and economical assessment are included. The data were provided by Valeo Compressor Europe Company.
|
|
| |
|
|
Piston for Bioethanol Engine
Žilinský, Ondřej ; Ramík, Pavel (referee) ; Svída, David (advisor)
The aim of this thesis is to design Husqvarna FE 501 turbocharged engine piston for Formula Student competition using bioethanol as its fuel. Proposed concept originates in background research on design solutions of modern combustion engine pistons. FEM simulations are used for piston design.
|
|
|
The Cylinders of Four-stroke Engines
Vanda, Marek ; Řehák, Kamil (referee) ; Dlugoš, Jozef (advisor)
The topic of this bachelor thesis is Cylinders of Four-stroke Engines. First part is about four-stroke cycle, engine construction. Next parts are about cylinders, their function and requirements. Also included is the importance of the cylinders on the engine operation and engine life. Last part is focused on the construction, materials of the cylinders and their usage in the past and today.
|
|
|
Alternative conceptions of combustion engines
Šťáva, Martin ; Fojtášek, Jan (referee) ; Zháňal, Lubor (advisor)
The subject of this bachelor´s thesis on the topic Alternative conception of combustion engines is description of chosen historical and present alternatives to conventional piston combustion engine with crankshaft. The aim of this thesis is to create thesis that relates description of historical evolution of alternative construction combustion engines. Alternatives are described in terms of construction, operating principle and properties. In past were developed plenty of different conceptions of combustion engines. However most of them have never been successful because of many technical problems, complicated construction or other shortages.
|
|
|
REINFORCED CONCRETE CYLINDRICAL TANK
Chumová, Petra ; Podroužková, Božena (referee) ; Šulák, Pavel (advisor)
The Bachelor´s thesis focuses on a static solution of reinforced concrete cylindrical tank. The thesis comprises dimensioning of the bottom of the tank and its walls to selected load cases and processing a drawing documentation. The calculation of internal forces is done using the software Scia Engineer. The validation of results is performed by hand calculation using differential equations on a simplified model for the results of internal forces in the wall of the tank.
|
|
|
Valveless Plunger Pump
Machů, Tomáš ; Kozubková, Milada (referee) ; Melichar, Jan (referee) ; Pochylý, František (advisor)
This thesis deals with valveless reciprocating pumps. Within the thesis several designs of pump geometry are demonstrated. Their parameters were obtained using computational fluid dynamics. Reciprocating piston movement was simulated by time dependent inlet boundary condition or by dynamic mesh. The individual variants were compared mainly from point of view of volumetric efficiency, which was the main evaluated parameter. Results of calculations are presented as dependencies of volumetric efficiency on frequency and amplitude of piston motion and on value of backpressure. Two variants of the prototype pump geometry were manufactured to experimentally validate parameters obtained from calculations. Volumetric efficiency together with hydraulic efficiency were evaluated from measured data.
|
|
|
Belt conveyor for brick chippings
Přecechtílek, Pavel ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to calculate and design a slant conveyor for the transport of brick rubble. The thesis deals with a description of belt conveyors, their main advantages and basic classification. The thesis also includes design of individual parts, a description of the components and characteristics of the transported material, including technical parameters. The thesis includes functional calculation performed by ISO 5048, 1994, identifying the main dimensions and design of the drive. The thesis also contains tensioning device design and strength calculation of tensioning the drum shaft. The thesis is accompanied by all the necessary technical drawings.
|
guest ::
