|
|
Detached house with lawyer's office
Prosnanová, Dominika ; Julinová, Patricie (referee) ; Bečkovský, David (advisor)
The goal of this bachelor’s thesis is to project a detached house with a lawyer’s office. It consists of two separate buildings. The detached house has two floors above the ground level and a basement. The lawyer’s office is projected as a single floor building with a barrier free access. Both buildings‘ construction systems are made out of limestone-sand blocks. The ceilings are monolithic and made out of reinforced concrete. The roof is flat on both buildings and weighted down by river aggregate.
|
|
|
Web Application for Thesis Management
Stodolová, Martina ; Neuwirth, Bernard (referee) ; Dydowicz, Petr (advisor)
This master‘s thesis deals with the design and implementation of a web application for the management of diploma theses for students and their supervisors. It defines theoretical starting points for web applications. Based on requirements and analysis of current solutions, it provides a proposal for application, description of implementation, economic evaluation and summary of benefits.
|
|
|
Family house Vojkovice
Juříček, Marek ; Kalánek, Jiří (referee) ; Eliáš, Luboš (advisor)
The theme of this work is the construction of newly family house in Vojkovice. The building has two floors and a basement. The land is sloping with a drop on one floor. The house is designed for 4 family members. The main entrance is in the first floor, where is also situated a garage for two cars. Vertical constructions are made of ceramic bricks Porotherm and concrete blocks. The cladding is insulated contact insulation. All ceiling construction is Porotherm systém as well. The roof is designed as a single-ply flat. The building is adequately lit and naturally ventilated.
|
|
|
Detached house with a dental practice in Mírovka
Dvořák, Martin ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This bachelor’s thesis deals with the project of a detached house with a dentist’s in Mírovka which is located close to the district town of Havlíčkův Brod. The detached house is intended for a five-member family, it has two floors and one basement. The dentist’s is a single-storey unit which is not connected with the detached house. The exterior load-bearing structure in the above-ground floors is designed of aerated concrete masonry units complemented with a contact thermal insulation system according to ETICS. The exterior basement wall is made of shuttering blocks filled up with concrete and complemented with thermal insulation. The horizontal load-bearing structures are designed of prestressed concrete floor slabs which are put on a reinforced concrete wreath. The detached house and the dentist’s are roofed with inverted roof.
|
|
|
Gantry crane control via Modbus TCP
Arm, Jakub ; Štohl, Radek (referee) ; Kaczmarczyk, Václav (advisor)
Modbus TCP is a protocol for communication via ethernet bus. Goal of this work is realization of control of gantry crane model from personal computer. It is accomplished by Modbus converter, which communicates via ethernet bus. There are two ways of controlling. By graphic user application written in C# or by web pages running on created HTTP server. All services use created library, which is written in C language and communicates via Modbus TCP with Modicon Momentum unit. This unit interprets orders in form of Modbus protocol to controlling of standard industry inputs and outputs for process instrumentation. This process instrumentation is binded to control the gantry crane model.
|
|
|
Single-spar Travelling Crane MV 6,3/9
Čížek, Ondřej ; Pokorný, Přemysl (referee) ; Mynář, Břetislav (advisor)
Bachelor’s thesis will deal with single-spar travelling crane with under crane trolley, lifting capacity 6,3t. Aimed at design main structural parts, which I split to three main parts. First part will deal with design crane bridge, second part will design crosspiece and third part will design screw connection. In calculations and designs I keep to the ČSN standards and crane design literature. This Bachelor’s thesis was written by cooperation with Iteco company.
|
|
|
Apartment house
Vohralíková, Petra ; Vorlíčková, Petra (referee) ; Čuprová, Danuše (advisor)
The bachelor's thesis deals with the design of a new apartment house in city of Pardubice. The subject of the bachelor's thesis is the elaboration of a part of the project documentation for the construction realization. The apartment house has 4 floors and is partially basement. In the basement there is a technical room and a cellars. On the first floor there is a vestibule, a bicycle shed and a carriage room, a cleaning room and 2 dwelling units. The second and third floors are identical in layout and there is 2 dwelling units in both of the floors. The fourth floor contains 2 dweling units with private terraces. The vertical load-bearing structure system in the basement is designed of concrete blocks of permanent formwork, in above-ground floors from hollow clay blocks. Horizontal load-bearing structures and stairs are designed as cast-in-place reinforced concrete. The roof structure is designed as a warm flat roof. The insulation of the building is solved by a certified contact thermal insulation system.
|
|
|
Detached House in Štoky
Žák, Karel ; Vojta, Martin (referee) ; Smolka, Radim (advisor)
This thesis addresses is the project documentation of a family house. This building is situated in the region Vysočina, the town Štoky. It is a three-store family house with one underground store and twoo up ground stores. Family house is projected for four-five people. Vertical structures are designed from lime-sand fittings. The residential part of the building is covered with a shed roof over the garage roof is flat.
|
|
|
Apartment house
Vlha, Daniel ; Vorlíčková, Petra (referee) ; Čuprová, Danuše (advisor)
The subject of this bachelor’s thesis is the elaboration of project documentation for the construction of an apartment house. The apartment house is located in the Kamechy housing estate on the outskirts of Brno near the Brno dam. The building is located on a plot slopping to the south. The building has three floors with partial basement. Its rectangular floor plan respects the visual style of the surrounding buildings. The building consists of 8 apartments in total, one of them is adapted to the needs of people with reduced mobility and orientation. The apartment house has wall structural system with longitudinal and transverse load-bearing walls made of clay blocks. The ceiling structures are semi-assembled from clay-concrete beams and clay inserts. The building is covered with warm flat roof with internal gutters. Vertical structures are insulated with the ETICS contact thermal insulation system.
|
|
|
Effect of orientation on solar systems performance
Daněk, Tomáš ; Weismanová, Júlia (referee) ; Jaroš, Michal (advisor)
The work explains the influence of orientation and inclination on the performance of solarcollector. The first part shows how the formation of the solar energy and how it gets onEarth and in what form we are able to capture it. In the second part of the work focuses on the basic parameters of the solar collector and method of calculating theperformance and efficiency. The next section describes the most common types of solarcollectors and their field of application. In conclusion the results of the calculation andevaluation of the influence and orientation angle on the performance of a particular type of solar collector.
|
guest ::
