|
|
Design of technology for gear manufacturing
Urbánek, Michal ; Píška, Miroslav (referee) ; Sliwková, Petra (advisor)
The master’s thesis is focused on the design of production technology and the choice of machines and tools to achieve the required accuracy according to the drawing documentation. During the design of production options, the advantages and disadvantages of gear machining variants were described. In the theoretical part, the technologies of the proposed operations were described, such as turning, milling of gears in a rolling method, shaving and grinding. In the practical part, the production itself is described in all sixteen operations that were needed to produce the part. Instructions and tables of measured dimensions were created for each machine operation. The economic evaluation summarizes material costs, machine and preparation times depending on the size of the production batch.
|
|
| |
|
|
Analysis of chain gears production.
Březina, Stanislav ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
Analysis of chain gears production including comparison and evaluation. Description of particular kinds of chain gears and wheels. Descripton of particular technologies and methods of production of chain gears and comparison of suitability of usage of particular methods, instruments and parameters.
|
|
|
Project of worm gear for lift mechanism
Otisk, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This graduation thesis dwells on a worm gear design for an elevator mechanism in an already existing wheel case with actuator unit S3 for elevator type BOV 320/0,63. The work includes dimensional and control calculation for the worm gear and as an attachment you will find spiral worm and worm gear drawing documentation, including its specific location.
|
|
|
Modern methods in spur gearing production.
Kopečný, Libor ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
The division and comparison of modern methods of production of spur gearings. The introduction is focused on the characteristics and description of cog wheels. Furthermore, the types of gearing and gear mechanisms are introduced. The main part of the text deals with individual ways of a production of spur gearings including finishing methods. The following part of this work describes the importance and possibilities of heat and chemical-heat gearing production. In the last chapters, the evaluation and achieved results of individual technologies of gearing production are introduced.
|
|
|
Gear Timing Mechanism for Valvetrains
Drdla, Adam ; Rasch, František (referee) ; Novotný, Pavel (advisor)
The objective of this thesis is to provide an overview of geared valvetrain. In introduction are described individual types of gears and their application in combustion engines. Then, the thesis is divided into three chapters. The first chapter provides a thorough analysis of geared valvetrain. Also, individual parts of valvetrain together with alternative methods of valve timing are briefly introduced. The chapter then follows to examine the working principle of gears, how forces and moments are transmitted, advantages of introducing helical gears instead of spur gears, different ways of gear manufacturing, gear material selection, heat treatment of gears and common gear failure mechanisms. The second chapter examines pros and cons of using geared valvetrains. The third chapter shows examples of how are geared valvetrains applied in tractors, trucks, ships, trains, cars and motorcycles. In the conclusion, the main advantages of using geared valvetrains are discussed and the whole thesis is summerized.
|
|
|
Gear failures
Paška, Josef ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This bachelor thesis is focused on gears. The first part of the thesis informs about the sorting of each type of gears. In the second part, there is a detailed overview of possible gears failures, including their causes, manifestation and their potential solutions for correction. The last part of the thesis handles technical experiment, which aims to performance of vibrodiagnostic of the gear system, tested on the test state. Measured data were subsequently processed by commercially accessible software, where the vibrations of transmission were recorded – firstly at the beginning of measuring when the gears were without damage and afterwards at the end of testing, when the state of damaged teeth was detected.
|
|
|
Sinumerik 840D control system for turning of the shaft for JAWA 23
Motl, Martin ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This Master’s thesis deals with the proposal manufacturing technology of a shaft with gears on a CNC machine tool. The first part of the thesis is focused on the concise description selected shaft and its use. In the next part of the thesis are state selected materials, which are suitable used for shafts and gears. After that is create drawing component, suggest technological procedure, tool list and machine list which are suitable used for manufacturing selected shaft. In the final part of the thesis is create a CNC program for manufacturing the shaft on the turning and milling machine. Program is created in software SinuTrain 4.7 for control system Sinumerik 840D. The CNC program is verified by graphics simulation to determine a correct function
|
|
|
Multifunction gear cutting machine
Danda, Libor ; Šmérek, Petr (referee) ; Brandejs, Jan (advisor)
Diploma thesis deals with the design of a small, computer-controlled machine tool. It is used for gearwheels production and combines the two most used manufacturing methods. The dissertation was dealt with in cooperation with a business subject which focuses on the development of milling machines. The introductory section is discussing research of current state of knowledge and market research focused on gearing machine tools, including patent investigation. The conceptual solution is discussing several variants of the cinematographic arrangement of the axes from which the final design solution was developed. This is described in detail in the second part of the dissertation. It contains description of individual construction complexes, choice of propellant units, modal analysis of sliding systems using the method of finite elements and in the conclusion the electronic part of the machine with its overall shape solution.
|
|
|
Gearbox for portable power generator
Kolka, Roman ; Hubáček,, Tomáš (referee) ; Bradáč, František (advisor)
The submitted project deals with a complete design of a gearbox of a portable ground power generator designed for preflight preparation of helicopters. The gearbox has been designed to meet given specifications, which are based on required electrical parameters of the entire power unit and with regards to parameters of driving turbine engine. The introductory section deals with a kinematical design of transmission gears with regards to required parameters and design constraints. The kinematical design determines whole concept and resulting form of the gearbox. Next part deals with optimization of gearing, the design of wheel bearing, and design of oil system. The implementation part of the project consists in the engineering design of the gearbox, which was made in 3D environment Pro/Engineer. The design is reviewed and first operational results of manufactured and tested gearbox are discussed in the concluding section of this work.
|
guest ::
