|
|
Design of CMOS integrated circuits
Nevrkla, Marek ; Bajer, Arnošt (referee) ; Musil, Vladislav (advisor)
This work deals with issues of design and simulation of analog CMOS integrated circuit. The general aim is to design transconductance amplifier working with low input offset voltage. The two stage operational – transconductance amplifier with compensation RC element is presented. Creation topography amplifier by the help of technology AMIS 07.
|
|
|
Information System Selection
Hofírek, Adam ; Novák, Lukáš (referee) ; Koch, Miloš (advisor)
This diploma thesis deals with suitable choice of Human Resources control informational system serving a larger technological company. It also contains processing of chosen analysis to identify shortcomings in problematic fields of the company. Obtained pieces of knowledge are used to the solution proposal in context of the issues of choice and following implementation of informational systems into the company.
|
|
|
Unconventional Signals Oscillators
Hruboš, Zdeněk ; Galajda, Pavol (referee) ; Štork, Milan (referee) ; Petržela, Jiří (advisor)
Dizertační práce se zabývá elektronicky nastavitelnými oscilátory, studiem nelineárních vlastností spojených s použitými aktivními prvky a posouzením možnosti vzniku chaotického signálu v harmonických oscilátorech. Jednotlivé příklady vzniku podivných atraktorů jsou detailně diskutovány. V doktorské práci je dále prezentováno modelování reálných fyzikálních a biologických systémů vykazujících chaotické chování pomocí analogových elektronických obvodů a moderních aktivních prvků (OTA, MO-OTA, CCII ±, DVCC ±, atd.), včetně experimentálního ověření navržených struktur. Další část práce se zabývá možnostmi v oblasti analogově – digitální syntézy nelineárních dynamických systémů, studiem změny matematických modelů a odpovídajícím řešením. Na závěr je uvedena analýza vlivu a dopadu parazitních vlastností aktivních prvků z hlediska kvalitativních změn v globálním dynamickém chování jednotlivých systémů s možností zániku chaosu v důsledku parazitních vlastností použitých aktivních prvků.
|
|
| |
|
|
Measurements by sampling computer card - laboratory task
Tomaštík, Roman ; Havránek, Zdeněk (referee) ; Dřínovský, Jiří (advisor)
This thesis focuses on the measurement with the help of sampling cards and determination of the basic parameters of the measured signal. There will be described basic characteristics of the used card Alazartech ATS860- 256M and brief description of the programming languages which will control the cards. In these environments there were the created driving programs for the operation of these cards. Main measuring program was created in the language C\C++, that shall work as oscilloscope and the same time as spectral analyzer. This programme will determine basic characteristics of the measured signal. Further there will be created simple preparation for memasuring with this card. In the conclusion of this thesis will create instrutions for laboratory exercise.
|
|
|
Fully-differential frequency filter designing with current active elements using signal-flow graphs method
Štork, Petr ; Jeřábek, Jan (referee) ; Langhammer, Lukáš (advisor)
This master’s thesis deals with designing of fully-differential current-mode frequency filters using signal-flow graphs method. The first part is focused on a general description of frequency filters, its function and division. Active elements that create these frequency filters, such as multi-output current follower (MO-CF), balanced or multi-output transconductance amplifier (BOTA, MOTA) and digitally adjustace current amplifier (DACA) are described in the following part. Next, problems and various techniques of designing such filters are discussed on a theoretic basis. In the remaining part of the thesis there are six circuits of frequency filters described in detail; these connections are then transferred of passive elements to a proposed connections, with the assistance of a so-called reflection. Calculations of passive form are stated, as well as results of simulations, where nondifferential and differential variations of these designed frequency filters are compared. Finaly, it has been selected some variants of designs, which has been manufactured, then measured out and resulet has been compare between each other.
|
|
|
Synthesis of the electronically reconfigurable frequency filters
Michalička, Filip ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This diploma thesis deals with design of reconection-less electronically reconfigurable filter structures which have single input and single output using unconventional active elements, which have ability to adjust one of their parameter e.g. gain or transconductance. The first part describes basic parameters of frequency filters, the division of filters by frequency transfer response and used circuit elements, their operational modes, the principle of reconnection-less electronically reconfiguration and the circuit design method MUNV. Second part describes all active elements used in the proposal of filters, their properties and the implementation using existing transistor-level models. The third part contains the design of three reconnection-less electronically reconfigurable filters and the simulations results obtained from simulation programs OrCAD Capture and PSpice. The obtained results were compared with theoretical behaviour. This part also contains results of these analyses: sensitivity, parasitic, Monte Carlo and temperature to determine the behaviour in varied cases.
|
|
|
New solutions of converters for measurement of current-mode filters
Štork, Petr ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor’s thesis describes some new solutions of differential converters that convert voltage to current and vice versa. Such converters are necessary for measurement of frequency filters in a current mode due to absence of instruments able to mesure signals with current as signal carrier. The goal is to design such converters that should influence gauged frequency properties in a current mode as little as possible. Converters will consist of operative amplifiers with current feedback. Converters designed this way are tested using simulations from PSpice programme, where particularly wideness of band of individual solutions is tested. Simulated solutions that are the most suitable ones are practicably re-enacted and gauged. These resuls of measurement and simulations are compared.
|
|
|
Electronically reconfigurable frequency filters
Gajdoš, Adam ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Application possibilities of LNVGA programmable amplifier
Sobotka, Josef ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the theoretical description of the qualitative characteristics and parameters of some modern active elements, also discusses the theory of signal flow graphs at the level applicable for the following frequency filter design methods. The thesis is also generally discussed the issue with the circuit simulator PSpice modeling theory and voltage amplifiers on the basic 6-levels. The practical part of the work is divided into two parts. The first practical part is dedicated to design four levels of simulation model of components LNVGA element. The second practical part contains detailed theoretical proposals for three circuit structures implementing the frequency filters 2nd order (based on the basic structure of the OTA-C) using signal flow graphs with configuration options of Q and fm based on the parameters of active elements in the peripheral structure and their verification with prepared LNVGA model layers.
|
guest ::
