|
|
Apartment building
Hlásenský, Marek ; Leischnerová, Jana (referee) ; Brukner, Bohuslav (advisor)
The bachelor thesis deals with the project documentation for the construction of a residential building in Brno in the Brno – Žabovřesky district. The building is detached in a slightly sloping terrain in Podveská street. The residential building has four floors and a partially buried basement. In the basement are designed garage parking spaces, cellar cubicles and technical background of the building. There are a total of 11 residential units on the above-ground floors, 3 residential units on each floor (2×1kk and 3kk) except for the last floor, where there are only 2 residential units (1kk and 4kk). The house is designed as wheelchair accessible. The construction system of the apartment building is wall-based: the basement is made of a combination of monolithic walls and columns, and the brick floor is made of ceramic blocks. The horizontal structures consist of reinforced concrete monolithic slabs with one-way or two-way reinforcement. The perimeter walls are insulated with the ETICS contact insulation system. The foundation of the building is made on foundation strips and the roofing consists of a green flat roof.
|
|
|
Apartment building
Svobodová, Tereza ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The aim of this bachelor's thesis is the preparation of project documentation for the new apartment building in Prostejov, which will meet the requirements and conditions for a building with almost zero energy consumption. This apartment building was designed in such a way that its operation does not limit the operation of adjacent apartment buildings on neighboring parcels in the immediate vicinity. The new building is designed as a detached apartment building on a flat plot. The main entrance and arrival to the plot is from the north side. On the land used by us, a parking area with the number of nine parking spaces will be proposed, which are located in the west. The building also has an underground garage with an additional parking space. The apartment building is designed as four floors with a basement. In the basement of the apartment building, there are storage spaces, together with the technical background of the relevant technologies, a garage with twelve parking spaces, which stands out from the regular shape of the building's floor plan. On the 1st floor there is also a carriage house, a bicycle shed, a cleaning and technical room and three apartment units. Only residential units are located on the other above-ground floors. The total number of residential units is twelve. They are divided into three layout categories – 1+kk, 2+1, 3+1. Apartment units on the 2nd floor, 3rd floor and 4th floor have balconies designed for recreation. If necessary, the layout of apartments and common areas can be changed to meet the requirements of barrier-free use of the building by persons with disabilities. The bachelor's theses were prepared in accordance with the current legal regulations of the Czech Republic as of the date of submission of this bachelor's thesis.
|
|
|
Single family home, Kunčice pod Ondřejníkem
Beseda, Jan ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this bachelor´s thesis is the design of a new family house in the village of Kunčice pod Ondřejníkem. The building consists of one above-ground and a partially basement floor, situated on sloping terrain. The construction is based on strip foundations. The vertical load-bearing structures are designed from ceramic mansory. The horizontal load-bearing structures are made of reinforced concrete monolithic continuous slabs. The roof of the building is a double-skin shed roof with aluminium floded roofing.
|
|
|
Apartment building
Kramplová, Marie ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor‘s thesis is the new construction of an apartment building, which is located east of the city center of Zlín, Příluky. The building has three floors above ground and has a partial basement. It is covered with a flat roof. Cellar boxes for individual apartments and technical facilities are designed in the underground floor. There are two apartments on each upper floor. The entrance to the building is from the west side, from where the access walkway comes. Parking for eight cars is provided inside the building. There are two parking spaces for the disabled outside the building. The structural system of the building is a wall made of Porotherm ceramic blocks. The horizontal supporting structure consists of a reinforced concrete slab. The construction is based on a basic waterproof reinforced concrete structure. The perimeter walls are contact-insulated with the ETICS system using facade polystyrene with a thickness of 200 mm.
|
|
|
Detached house in Svinošice
Nováková, Pavlína ; Kacálek, Petr (referee) ; Petříček, Tomáš (advisor)
This bachelor thesis focuses on the development of project documentation for a detached house with a parlor in Svinošice, Czech Republic. The single-family house sits on a flat plot within the village’s built-up area. The design incorporates a partial basement and two floors above ground. The structure is based on basic passports and the horizontal load-bearing structures are made of reinforced concrete. The roof system consists of a combination of a flat roof and a gable roof. The footprint of the building is 315 m2.
|
|
|
Energy efficient family house
Honek, Jan ; Brzoň, Roman (referee) ; Vlach, František (advisor)
My bachelor's thesis aims to design documentation for building permission of an Energy efficient family house. The thesis is divided into two parts. The first part includes architectural, structural, and fire safety designs and daylighting, acoustic, and thermal assessment. The building is designed on a sloping plot in Předklášteří. It has three-stories with a gable roof and is designed for a family of five. The floor plan of the building is a simple rectangle with an unusual layout. In the basement, there is the private part, and the social part is on the first floor. The foundations are designed from cast-in-placed concrete, vertical load-bearing walls are designed from sand-lime blocks. The floor structure is from prestressed hollow core slabs. The roof structure is designed from timber trusses. Developed designs of building services and energy certificate are elaborated in the second part of the thesis. I design water supply, wastewater management, rainwater management, electric installation, and heat systems. The rainwater will be stored in underground tanks, placed outside of the house, and will be used for flushing toilets and irrigation. The main source of heating is an air-water heat pump, and the supplementary heat source is a stove. There is floor heating in the building. I designed photovoltaic panels on the south-facing roof to use renewable resources. This ventilation system is designed as mechanical heat ventilation recovery, to reduce heat losses. The house is designed to have an A-class rating in energy performance certification.
|
|
|
Apartment build in Valašském Meziříčí
Honešová, Veronika ; Pěnčík, Jan (referee) ; Dohnal, Jakub (advisor)
The bachelor's thesis focuses on the design of a new apartment building with a basement, for which project documentation for construction implementation is being prepared. The proposed apartment building is located in Valašské Meziříčí and is designed as a standalone structure with a basement, three above-ground floors, and an underground garage. The apartment building is designed for families of three to four members and consists of four residential units. The entrance to the building is situated on the northern side. On the ground floor, there is an entrance common hallway with a staircase. From the hallway, two apartments of 3+kk can be accessed. On the first floor, there is a 3+kk apartment and a 4+kk maisonette apartment. On the second floor, there is a part of the maisonette apartment. In the basement, there are garages. Each residential unit has a terrace or balcony and one parking space. The building is insulated with the ETICS contact system and is designed from POROTHERM ceramic masonry elements, with horizontal structures being reinforced concrete monoliths, and the entire building is founded on strip foundations. The apartment building is designed with a flat roof. The facade will be finished with a white thin-layer silicone plaster or facade panels with a wood imitation.
|
|
|
Apartment building, Sadová
Takács, Roland ; Pěnčík, Jan (referee) ; Kolář, Radim (advisor)
The subject of this bachelor's thesis is the preparation of project documentation for the construction of a residential building. The apartment building is located in the Brno - Sadová district in an area designated for mass housing. The plot for the new residential building is flat. The apartment building is designed as a standalone structure with three above-ground floors and a partial basement. It contains 9 residential units. The entire building is covered with a single-layer green roof. The parking area consists of 15 parking spaces, 2 of which are designated for disabled individuals. Both the vertical load-bearing and non-load-bearing structures are made of Porotherm ceramic blocks. The horizontal load-bearing structures are made of pre-tensioned Spiroll floor panels. The balconies are monolithic with an Isokorb system. The staircase is a two-flight slab staircase. Insulation is provided by mineral wool in formworks. The following programs were used for the preparation of the project documentation: Autodesk REVIT, Autodesk AutoCad, Building Design
|
|
|
Apartment building
Štěpánek, Radek ; Hradil, Dušan (referee) ; Kolář, Radim (advisor)
The aim of the bachelor thesis is to design and elaborate project documentation for the construction of a new residential building located in the cadastral area of the town of Rokytnice v Orlických horách. It is a building with two above-ground floors and one basement, containing a total of 5 residential units. There are two 2+KK apartments and three 3+KK apartments. The entrance to the building is located on the west side. In addition to residential units, there are rooms such as a workshop, technical room, conference room, storage cubicles, stroller room, and bicycle room. The building is constructed with ceramic blocks Porotherm, without additional contact insulation. The ceiling structure consists of beams and ceramic inserts, poured with concrete. The roof structure is single-layered with a load-bearing layer of washed river gravel. The foundations consist of concrete strips. The balcony is constructed using ISO beams with thermal bridge interruption.
|
|
|
Single-family house
Bendová, Natálie ; Brzoň, Roman (referee) ; Struhala, Karel (advisor)
The aim of the bachelor´s thesis is to design a single-family house. The thesis is divided into two parts. The first part of the thesis includes architectural and structural designs, assessment of building physics (acoustic, daylighting, thermal parameters) and fire safety designs and the second part focuses on the design of selected building services and energy performance certification. The house is located in Brno. It has two stories, partial basement and a flat green roof. The main entrance is situated to the southwest. On the first floor is situated a living space comprising a living room connected to a kitchen. On the second floor is a private zone with a master bedroom, two children bedrooms and an study. A utility room and food storage are in the basement. The building is based on reinforced concrete slabs. The load-bearing walls in the basement are made of concrete permanent formwork blocks insulated with XPS. The load-bearing walls in above-ground floors are made of sand-lime blocks insulated with EPS. Horizontal load-bearing structures are made of reinforced concrete. Partition walls are plasterboard, double sheathed and filled with acoustic insulation. The suspended ceiling is also made of plasterboard. The house is divided into three zones – residential zone is heated and mechanically ventilated (with heat recovery). Garage and basement zones are not heated, basement is mechanically ventilated. The house is heated by an air-water heat pump, heat distribution is provided by floor heating and electric towel radiator in the bathroom. On the roof are located 13 photovoltaic panels which supply electricity into house. Batteries for electricity storage are located in storage adjacent to the garage. Heat pump and ventilation unit are placed in the basement. Fresh water is supplied by existing public water mains. Waste water is directed into sewer system. Rainwater is collected in the rainwater storage and used for watering.
|
guest ::
