|
|
Evaluation of the Financial Health of the Selected Company and Suggestions for Improvement
Nevídal, Martin ; Slavík, Tomáš (referee) ; Zemánková, Lenka (advisor)
The Bachelor´s thesis deals with the evaluation of the financial health of the selected company by the analysis of business environment and financial analysis. The theoretical part processes literature review on the issue according to which is created analysis of the internal and external business environment, SWOT analysis and financial analysis in the practical part. Then there are evaluated the results and possible solutions suggested to the financial situation of the company which are based on the findings from each analysis.
|
|
|
International Expansion of a Chosen Company
Nevídal, Martin ; Slavík, Tomáš (referee) ; Koráb, Vojtěch (advisor)
Cílem diplomové práce „Expanze vybraného podniku na zahraniční trh“ je navrhnout strategii vstupu společnosti SLUTO s.r.o. na rakouský trh. Teoretická část práce je věnována problematice internacionalizace a podnikových strategií a možnostmi vstupu na zahraniční trhy. V analytické části práce jsou provedeny analýzy prostředí společnosti SLUTO s.r.o. za předpokladu její působnosti na rakouském trhu, přičemž získané výsledky jsou následně sumarizovány ve SWOT analýze. Návrhová část práce, jež je v podstatě business plánem rakouské dceřiné společnosti SLUTO s.r.o., pak v souladu s poznatky z jednotlivých analýz nabízí možné návrhy a doporučení.
|
|
|
Production of guiding disc
Slavík, Tomáš ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis is focused on the design of the production of a guide disk made of sheet metal DC01 with a thickness of 3 mm. The production series is set to 100 000 pieces per year. Due to the required accuracy and size of the series, it was chosen that the guide disk will be made by the method of fine blanking. A coil of sheet metal has been chosen as the semi-finished product due to percentile of material usage and size of the series. For production will be needed a total of 24 coils of sheet with length of 308 m and one incomplete coil with a length of 132 m. The total force was calculated as Fc = 887,3 kN. Due to this strength, dimensions of the sheet and floor area of the tool, a triple-acting hydraulic press FEINTOOL XFT 1500speed was chosen for the production of the part. The last step was to check whether the size of the series is profitable or lossful. It was calculated that production becomes profitable at 49 554 pieces. Due to the size of the series, it can be stated that the production will be profitable.
|
|
|
Business Plan for Overseas Expansion
Jelínek, Dominik ; Slavík, Tomáš (referee) ; Zinecker, Marek (advisor)
The main goal of this diploma thesis is based on the analysis of the current state to formulate a proposal for the expansion of the business entity to foreign markets. The theoretical part summarizes the latest knowledge from the literature in the field of strategic management of the company, business and expansion of the company. The practical part is focused on the company Fermat CZ, s. r. o. and the company Lucas precision, INC. The design part formulates the company's business plan for expansion into the US market through the acquisition of the company.
|
|
|
Power control of combustion engines
Slavík, Tomáš ; Beran, Martin (referee) ; Zháňal, Lubor (advisor)
The main subject of this dissertation is a comparison between different methods of controlling the output in compression and spark ignition engines in light of economic- ecological parameters, effects on engine functioning as well as vibrations. Main types of power control, their principle, advantages and disadvantages are presented in the text. There are several comparative simulations described and presented at the end of this work that were created by using a multi-body system. Calculation of parameters and simulations were selected to approximate resulting values to real values as much as possible.
|
|
|
Multi-point Injection
Slavík, Tomáš ; Svída, David (referee) ; Dundálek, Radim (advisor)
The main objective of this Bachelor degree thesis is to describe and to bring closer the function of the multiple fuel injection system (nebo the function of fuel injections with multiple sets) in spark-ignition combustion engines, as well as to create a summary of individual components in fuel injection frameworks together with describing their functions and comparing them with other alternatives in fuel systems. In the conclusion, an elaboration on development trends in combustion engines will be provided.
|
|
|
Proposal for Establishing a Firm with Fishing Tackle
Slavík, Tomáš ; Vystrčil, Miloslav (referee) ; Mikulec, Luděk (advisor)
This thesis deals with the business proposal, which we intend to implement from the 2nd quarter of 2018 and which should serve to implement a tackle shop. The work characterizes basic business concepts, makes the analysis of the current situation on the market and of the secured place for the performance of business activities including the proposed modifications of the interior and describes the anticipated costs and benefits of the project. In the last chapter there is a summary timetable for the implementation of the project, so that nothing was forgotten and the shop could be opened.
|
|
|
Predikce bankrotu zemědělských podniků
Slavík, Tomáš
Slavík, T. Prediction of bankruptcy of agricultural enterprises. Bachelor thesis. Brno: Mendel University in Brno, 2024. This bachelor thesis deals with the prediction of bankruptcy of agricultural enterprises in fourteen selected EU countries. The main objective is to develop and verify the accuracy of the model for prediction of bankrupt enterprises in the period one, two and three years before bankruptcy. A logistic regression is selected for this purpose. A partial objective is to optimize the cutoff value using the Youden index to enhance the model's performance. The results of the bachelor thesis suggest that created models with the initial cutoff value 0,5 are unsatisfactory in predicting bankrupt enterprises. To improve their ability to classify bankrupt agriculture enterprises, a cutoff point optimization was carried out, which led to a significant improvement in the model's ability to predict enterprises bankruptcy.
|
|
|
Production concept of adjustable holder
Slavík, Tomáš ; Řiháček, Jan (referee) ; Císařová, Michaela (advisor)
The discussed issue was the production of the body of the adjustable universal holder for license plates, blinkers, and reflectors for Yamaha motorcycles. The material chosen for the production of the component was DC01 steel with a thickness of 3 mm and the size of the series is 120 000 pieces per year. After evaluating considered production variants, it was decided that the part will be made in compound tool that combine shearing and bending operations. The part will be produced by four shearing operations, three inter-shearing operations, one bending operation and by shearing the finished component from the sheet metal strip. Sheet metal coil was selected as the semi-finished product, with a material usage rate of 51,46%. Based on technological calculations, it was decided that the eccentric press DM400 from Formetal will be used for production. The tool design with a spring floating guide was chosen and his parameters were derived from previous calculations and the selected production process.
|
|
|
Production of guiding disc
Slavík, Tomáš ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis is focused on the design of the production of a guide disk made of sheet metal DC01 with a thickness of 3 mm. The production series is set to 100 000 pieces per year. Due to the required accuracy and size of the series, it was chosen that the guide disk will be made by the method of fine blanking. A coil of sheet metal has been chosen as the semi-finished product due to percentile of material usage and size of the series. For production will be needed a total of 24 coils of sheet with length of 308 m and one incomplete coil with a length of 132 m. The total force was calculated as Fc = 887,3 kN. Due to this strength, dimensions of the sheet and floor area of the tool, a triple-acting hydraulic press FEINTOOL XFT 1500speed was chosen for the production of the part. The last step was to check whether the size of the series is profitable or lossful. It was calculated that production becomes profitable at 49 554 pieces. Due to the size of the series, it can be stated that the production will be profitable.
|
guest ::
