|
| |
|
|
Newly-Built Detached House with Dental Surgeries in Brno-Žebětín
Matoušek, Jan ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is a design of a new building of a family house with dental surgeries in Brno – Žebětín, as well as elaboration of project documentation for realization of building construction. The building is designed for mixed use - there is stomatological surgeries available to the public in the 1st floor, and on the 2nd floor there is the owner's and his family's apartment. Both sections are separated from each other, including separate entrances to the building. The building will be located on the edge of the northern part of Brno - Žebětín. The location is slightly developed by family houses. The architectonical solution is designed with consideration of the building location and the character of the surrounding housing development. The part for living in the family house is designed for a family with three to four members. The house is detached, it is situated in a flat terrain and is designed as a partially basement. The designed building has two above-ground storeys and a basement, which has a garage for parking two cars and a technical facility of the building. Entrance to the garage is from the side of the building. The main entrances to the building are accessible from the adjacent outer curved staircase, copying the arched shape of the 1st storey facade. The section with dental surgeries on the 1st floor is designed as wheelchair accessible - for handicapped patients with limited mobility. The white solution of the facade of the house alternates with the use of a gray stone facing. The roof of the family house is designed as a single-layer flat roof.
|
|
|
Energy efficient terraced house
Král, Jakub ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The aim of my diploma thesis is a design of a new energy efficient terraced house in the gap site. Building has two dwelling unit of category 4+kitchenette and 6+ kitchenette. Building has a cellar, two floors and an attic. The cellar structures and horizontal structures are made of reinforced concrete. Sand-lime bricks are used for masonry. The building is covered with gabled roof with timber roof truss. In this building there are used rainwater and renewable energy in a form of electrical energy made by photovoltaic panels.
|
|
|
Detached House with recording studio
Koloničný, Libor ; Mizerová, Lenka (referee) ; Smolka, Radim (advisor)
The task of bachelor’s thesis is the preparation of project documentation of the detached house with a recording studio. This is two storeys brick building with one floor in basement where recording studio is. The house has flat roof above the second floor and over part of first floor is terrace. The building is constructed of system KM Beta Sendwix M and prestressed ceiling panels Spiroll. The house is designed for quality housing 4-5 persons.
|
|
|
Industrial Park with Aministration Building
Krupa, Jakub ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focuses on the design and elaboration of project documentation for the purpose of constructing Industrial park with administration building consisting of two parts, SO 01 – Administration building and SO 02 – Industrial building. The two objects are situated on the plot No. 715/1, in the cadastre unit Vrbno pod Pradědem located on an undeveloped land of the investor. The exit from the parking lot connects to the local traffic infrastructure. Public infrastructure leads in proximity to the land. The design of the construction respects local zoning plan. Project documentation was made in compliance with up-to-date requirements according to valid standards and regulations. The building is functionally divided into two objects, SO 01 and SO 02, which are operationally and structurally connected. Constructions of both objects are statically independent. The object SO 01, partially accessible to the public, is used for administrative tasks and staff facilities. Also, there is a sample room available to the public, gatehouse and warehouses. The object SO 02 is purposed for the production of plastic windows and solar panels. It mainly consists of areas used for production, but there is also an office for the master, a machine room for heating, ventilating and air conditioning (HVAC) and staff facilities. The object SO 01 is designed from a wall structural system from clay masonry, clay ceilings, strip foundation and a flat roof. The object SO 02 is designed as a full-metal prefabricated object with a saddle roof and foundation pads. The construction system of this object consists of steel columns. Plan dimensions of SO 01 are 25x14 metres. Building envelope is made from clay blocks, 440 mm in width, filled with mineral wool. Plan dimensions of SO 02 are 66,9x22,9 metres. Object’s curtain walling is made from prefabricated sandwich panels containing a core from PUR material.
|
|
|
Detached house with private office
Landecký, Tomáš ; Janda, Martin (referee) ; Kacálek, Petr (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a detached house with private office. Object is a basement with garage for two cars. The building has two floor and one grand floor with garage for two cars. The building is set in sloping terrain. Load-bearing structure is formed by formwork Best and structural system by Porotherm. The building is coverd by saddleback roof and walkable green roof.
|
|
|
Mountain Hotel
Surala, Václav ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This thesis deals with design of a mountain hotel in the village of Loučná nad Desnou. The building has a four floors and a basement. Rooms for technical support and fitness center are situated on he basement. On the first floor are reception, restaurant and shop with sports equipment .On the second floor are rooms for guests, multifunctional room and utility room. On the third floors are only rooms for guests and utility room. There is a posibility to visit a green flat roof from the fourth floor. Object of mountain hotel is designed from permanent formwork and sand-lime blocks and floors structures are designed of lightweight concrete. Mineral wool is used for thermal insulation of the facade. Roof is designed as a green warm flat roof.
|
|
|
Senior house
Voráč, Roman ; Mátl,, Miroslav (referee) ; Moudrý, Ivan (advisor)
Content of this thesis is proces and structural layout design of subject „SENIORS’ BOARDINGHOUSE“. It’s a wide subject, which south wing is designed as single-storey with cellarage, central subject is two-storeyd without cellarage. Wooden shelters are connected to north and south wing. Architecture has been chosen in order to make a subject evoking calm and positive impression for retirement aged persons living. Roof structure is double-pitched shape with two main skylights. Roof is red coloured and a facade is white. Interior space of subject is designed to satisfy a demands for comfortable living of single persons (one-room flats) as well as retirement aged couples (2+KK flats). Round the subject there are situated further tinier subjects there designed for utilization by seniors, but for those who are still active. Subject is brick, founded on continuous footing and spreading slab. Roof structure is constructed of wooden bearing rafter framework which is, in case of main object, designed with central binding rafter and collar roof in case of north and south wing. Subject is insulated with External Thermal Insulation Composite System, roof is covered by ceramic roof covering in combination with folded sheet metal covering. Main living quarters is situated in first and second above-ground storey of central subject, restaurant with background lie in south wing and wellness available for public as well is situated in north wing. In basement of south wing there is technical background of whole subject situated there as is garage, technical room, service room, bicycle room and storage. Next the kitchen staff background including storages for kitchen lie here.
|
|
|
Multifunctional house in Jablonec nad Nisou
Klinke, Jakub ; Průša, David (referee) ; Štěpánek, Ladislav (advisor)
The subject of the bachelor thesis is the design of a multifunctional apartment building with large flats and the elaboration of construction documentation. The building is situated in a quiet location of the statutory city of Jablonec nad Nisou in a nearby distance from the dam, which is used for rest and recreation. The surrounding development consists of apartment buildings from the beginning of the last century with a height of three to four floors. The building itself is detached with four floors and one basement. On the first floor there is an establishment intended for administrative use. The first floor also contains a barrier-free apartment and a barrier-free entrance to the building. On the level of the first floor, there is also a car park with barrier-free access to the building. There are always 2 apartments on the other floors. The basement is designed as a technical floor and there are also cellars belonging to the apartments.
|
|
|
Energy-saving detached house
Šišková, Šárka ; Slávik, Richard (referee) ; Čuprová, Danuše (advisor)
The subject of this thesis is the preparation of project documentation of energy-efficient family house with an establishment. It is an object composed of one basement and two floors. The house will be based on the footings of plain concrete C 16/20. The base plate is also made of unreinforced concrete C16 / 20, with garages and bars will be fitted with curry networks with a diameter of 6 mm and 150x150 mm mesh size. Masonry floors is designed from POROTHERM system, basement walls are made of shuttering blocks BEST 500x300x250 mm. On the second floor are designed Knauf drywall partitions button. 125 mm, filled with acoustic insulation ISOVER MERINO. The horizontal structure of the ceiling is solved ceiling Porotherm (beams POT and inserts MIAKO) thick. 250 mm. The staircase is designed reinforced concrete. The chimney will be built from the system SCHIEDEL UNI with ventilation shaft. The supporting structure of the roof is gabled wood roof system with Tondach roofing, roof slope is 30 degrees. Exterior windows and exterior doors are plastic. Roof windows from VELUX. All internal doors are wooden casing. The garage will be placed sectional doors. The floor covering is designed according to the operation of individual rooms. The drawings are processed in AutoCad.
|
guest ::
