|
|
Design and processing of teaching practices dash navigation
Bandúr, Juraj ; Vosecký, Slavomír (referee) ; Chlebek, Jiří (advisor)
The diploma thesis deals with concepts of various key tasks for flights operated by device navigation, while these tasks are designed under the requirements of the regulation JAR-FCL 1. The work also includes explanation of the principles of operation of selected radio navigation devices, which are demonstrated in various roles, making these tasks serve well as a possible teaching material for navigation subjects. Part of the work also includes the evaluation of the simulator FlitePro for the purposes of its certification as a training device.
|
|
|
Design of driving simulator
Kubeš, Filip ; Kučera, Pavel (referee) ; Porteš, Petr (advisor)
The aim of this thesis is the design of a motion driving simulator for real-time simulation of driving experience. The design takes inspiration from an analysis of existing solutions. An emphasis was put on driver ergonomics in positions typical for a sports car, passenger car and truck, then on variability of motion system and simplicity of the whole design. The dynamics of motion system is also a subject of research. The computational model has been created to test the optimal position of moving arms. Another aim of the study is to create an interface between hardware and software, to confirm the function of the control device using a simple simulation model.
|
|
|
Modeling and Simulation of Mobile working machine Powertrain
Zavadinka, Peter ; Věchet, Stanislav (referee) ; Kriššak,, Peter (advisor)
Táto diplomová práca sa zaoberá vytvorením dynamického modelu mobilného pracovného stroja. Ciežom práce je vytvorenie blokového modelu pohonu štvorkolesového mobilného pracovného stroja. Model hydrostatického prevodu bol dodaný firmou Sauer-Danfoss. Model mobilného pracovného stroja bol vytvorený v programe MATLAB-Simulink. Dalšou časťou práce je výber typu riadenia hydrostatického prevodu a návrh riadiaceho algoritmu hydrostatického prevodu. Výstupom práce je blokový matematicko-fyzikálny model pohonu štvorkolesového mobilného pracovného stroja spolu s riadiacim algoritmom hydrostatického prevodu v prostredí MATLAB-Simulink.
|
|
| |
|
|
Model of microgrid with energy storage
Halás, Andrej ; Drápela, Jiří (referee) ; Kopička, Marek (advisor)
This thesis describes the operation , characteristics and operating conditions of microgrid with energy storage , provides insight into the benefits of using listed concepts . The first part deals with the description of microgrid systems, distribution and shows examples of its use. The second part describes individual elements of the storage systems, energy production and energy transformation used in microgrids . The third part describes the work with PSCAD software. The main goal is to design a micro grid model in PSCAD and validate its function.
|
|
|
Magnetically levitated cart
Jančuš, Rastislav ; Pohl, Lukáš (referee) ; Blaha, Petr (advisor)
Diploma thesis is summarizing common theoretical knowledge about permanent magnets and electromagnetism. Represent DC electromagnet as basic part for levitated high-speed train. Work is analyzing basics under cart and principles used for magnetic levitation in high-speed transportation. Second practice part including projecting construction levitated cart and analyzing acquired mathematical model of electromagnet. Work is analyzing process for projecting control for side electromagnets and realization real model, including tuning computer communication with states of sensors and comparison real model with model simulated in program Simulink.
|
|
|
Design of new V/I and I/V converters for the measurement of current-mode filters
Jarník, Lukáš ; Polák, Josef (referee) ; Langhammer, Lukáš (advisor)
This master’s thesis deals with problems of analog differential converters, which are used in measuring circuits working in the current mode. The aim of this thesis is to propose a new voltage to current and current to voltage converter, that should influence measured frequency properties as little as possible. Commercial active elements are use to design converters. Active components are compared on the basis of properties as bandwidth and slew rate. Designed converters are simulated in Orcad PSpice program. Converters, of the best behavior are practically implemented and measured. Measured and simulated values are compared.
|
|
|
Simulation of Triple Play services in passive optical networks with OMNeT++ application
Puchrík, Matej ; Oujezský, Václav (referee) ; Horváth, Tomáš (advisor)
The thesis deals with dynamic bandwidth allocation in passive optical networks of NG- PON2 standard. The paper also describes the so-called. triple play services and the practical part is a simulation of these services in passive optical networks NG-PON2 in the simulation environment OMNeT ++. As part of this work modules for passive optical network NG-PON2 were created as an expansion of project INET. Namely ONU, OLT and splitter modules were created. The first four chapters are theoretical and descibe older standards PON networks, further NG-PON2 networks and DBA algorithm then describes triple play services and explains their current status respectively. In another part a description of the programm OMNeT++ a description of the structure of simulation models. The practical part contains a description of modules, implementation of DBA algorithm and its modification, design simulated topology and detailed description of the configuration simulation. At the end of the practical part presents the results of simulations with the corresponding explanations.
|
|
|
Structural analysis of part of electrical machine
Fodor, Viktor ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
This thesis discusses the optical diagnostics of electrical motor parts using a 3D scanner. It describes the construction of electrical induction motors, their heat losses, cooling and refrigeration systems that may be used by such motors. It approaches the possibilities of heat recording and briefly explains the 3D scanner’s principal. It also introduces the simulation program ANSYS which uses the finite element method. This thesis shows the post processing of the digitalized object and the simulations and compares the simulation and measurement results. The final part is devoted to the analysis of the obtained results.
|
|
|
Draft of computer strategic game for simulation of employee motivation
Pagáčová, Anna ; Mildeová, Stanislava (advisor) ; Malinová, Ludmila (referee)
The bachelor thesis deals with the design of the computer strategic game for simulation of employee motivation. The main objective of this work is to create a draft of strategic game that will encourage systemic thinking of managers and students preparing for a career in management. In the first part the theoretical background of this issue is discussed, especially the concept of systemic thinking and motivational theories, which is central to the game design. The second part of the thesis goes into the analysis of game itself and the problem of employee motivation. The last third part consists of the actual game design, which is designed without technical implementation. It provides a logic game with a basic graphic design.
|
guest ::
