|
| |
|
| |
|
|
Electric bike with a combustion-engine-powered generator
Mička, Dominik ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
A conceptual design and realization of a motor bike using combustion engine and electrical power transfer is the objective of this master´s thesis. Control strategy that allows combustion engine to reach maximal efficiency cooperating with wide range speed and torque operating area electromotor was created. All function blocks were realized. Also hardware of all needed parts was developed. The last part was a design and debugging of control software. Finally the functionality was documented by test drives and measurements.
|
|
|
Power supply of electrostatic separator
Broďák, Kamil ; Pazdera, Ivo (referee) ; Huták, Petr (advisor)
The diploma thesis focuses on the problems of electric power precipitators. Due to their current dominant position, the work concentrates on the sources of single phase transformers operating at the frequency of 50 Hz controlled by thyristors. The first part describes the electrostatic precipitator and its principle. This is followed by a brief insight into the proposal for an electrostatic precipitator. The work also explains the high voltage source that is divided into a transformer with a rectifier and into a control box with power circuits and control circuits that provide the power supplied by a transformer. The work also offers an explanation of the HV source system that operates at different conditions. The last part suggests a proposal for cooling cabinet including thyristors, for power line control box resources, for a supply line and a line to the transformer.
|
|
|
Non-filtering applications with current and voltage conveyors
Horáček, Lukáš ; Herencsár, Norbert (referee) ; Mišurec, Jiří (advisor)
This thesis is focused on using non-filtering applications with voltage and electric current conveyors. Conveyors may be used both for filtering and for non-filtering applications. They are basic elements of many modern electric circuits and operational amplifiers. First of all, I had described what the conveyor in general is, its historical development, which types of them we can meet with and its availability in integrated circuits. Then I focused on circuits which are subject of this thesis. Namely they are: functional transducer, rectifier and integrator. These circuits were analyzed and simulated by computer software. After this I designed their realization and performed experimental measurement.
|
|
|
Four-electrode impedance plethysmograph
Port, Martin ; Kolář, Radim (referee) ; Chmelař, Milan (advisor)
This master’s thesis is an introduction to the measurement of changes in tissue impedance of blood flow by impedance plethysmography. Other chapters deal with the kinds of plethysmographs and their principles. The aim is to draft four-electrode impedance plethysmograph to measure changes in tissue impedance depending on blood flow. First, describe the individual blocks of the medical instrument. The practical part of the master’s thesis involves circuit design four-electrode plethysmograph. Given that a very important role in its function plays a constant current source operating at a frequency of 60kHz, this subset was implemented and verified its correct function. To draw component schemes used program EAGLE version 5.10.0.
|
|
|
Nonlinear circuits using current active elements
Langhammer, Lukáš ; Kubánek, David (referee) ; Koton, Jaroslav (advisor)
This thesis deals with non-linear curcuit structures with current active elements. In its introduction this work deals with a description of the current active elements, such as current conveyor, transconductance operational amplifier and current follower. Further the text pays attention to the possiblities of the circuits for modification signals in analogue technology. First are described circuits of diode limiters and transducer. Great attention is paid to the amplifiers with current active elements. Are propřed simulated and practically realized circuits of universal precise full-wave rectifiers using operational amplifier and current conveyor and made comparisons of known and proposed circuits. The paper also discussed other circuit structures using of current active elements, such as multiplier, divider, a triangular signal generator and oscillators.
|
|
|
Operation of a distribution system with resistance welders
Zelený, Miroslav ; Šlezingr, Jan (referee) ; Drápela, Jiří (advisor)
This Diploma thesis deals with assessment of the influence of two fundamental types of resistance welders operation on chosen power quality parameters at the point of common coupling (PCC) of the power network. The assessed parameters of power quality are the total harmonic distortion of the supply voltage, asymmetry of the supply voltage and the level of short term flicker at the point of common coupling. The assessment is based on the comparison of the results of computer simulations done in PSCad 4.2.0 with the requirements of technical standards. The outcome of this thesis is the determination of allowable limits for physical and operation parameters for the general arrangement of a power distribution network and a resistance welder that should guarantee the power quality compliance.
|
|
|
Safe Uninterruptable Power Supply of Power Station Internal Consuption
Tomášek, Petr ; Přidal, Petr (referee) ; Orságová, Jaroslava (advisor)
This thesis examines issues connected to safe uninterruptible power supplies. The term safe uninterruptible power supply is used for an aggregate of devices providing power for appliances that participate in safe rapid shutdown of a power plant in case power from a usual source fails. The thesis is divided into two parts – theoretical and practical. Theoretical part deals with possibilities and ways of realizing an aggregation of safe uninterruptible power supply. Various devices that can appear in the section of a safe uninterruptible power supply are listed and each device is characterized. Appliances that can be provided for by the sources of safe uninterruptible power supply are mentioned as well. These appliances are listed in accordance with ČSN standard nr. 381120. The theoretical part concludes with new trends in realization of safe uninterruptible power supplies. One of these sources is a clean source technology that can also be implemented in various ways. Practical part contains a suggestion of a safe uninterruptible power supply for particular steam power plant. This suggested safe uninterruptible power supply consists of rectifiers, batteries, inverters and a dieselgenerator. Calculated parameters of each device at the conclusion of the practical part are followed by a diagram of the suggested section of safe uninterruptible power supply.
|
|
|
The electronic commutation motor
Bláha, Martin ; Huzlík, Rostislav (referee) ; Melichar, Petr (advisor)
This work discusses about nowadays problematic of the electronic comutation motors.This work also describes the opportunity of electronic control of these motors. The result of this work is realization of electronic control circuit from discreet components. There also are mentioned is proposal of electronic control board from SMD components. This control board include temperature control with ventilator switching , commutation logic, PWM speed control. In the last part of this paper are results of evaluation measurements of EC motor.
|
guest ::
