|
|
Production for the Pin Screw Conveyor
Drmota, Josef ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
The aim of this bachelor thesis is the compilation of technological procedur of manifacturing of the component called the pin screw conveyor and its subsequent production. In the first part is chosen suitable material and semi-product for the production. Following part deals with proposal of the technological procedure of manufacturing and production of the component. The final part is devoted to the comparison and summary of the results.
|
|
|
Large-loading wagon with a screw conveyor
Peterka, Jaroslav ; Peňáz, Jan (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with analysis of constructional solution of large-loading wagons used nowadays. In the first part of this thesis is my own construction design of large-loading wagon, furthermore there is a design of screw conveyor. In the following part stress strain analysis of the chassis of large-loading wagon was made using the finite element method. On the basis of these results were suggested modifications of the chassis. Finally the stress strain analysis of the adapted chassis was made. Attachments of the thesis include deformation results of the chassis and design documentation of the large-loading wagon. This thesis was created in cooperation with ZDT spol. s.r.o. Nové Veselí.
|
|
|
Neutralization of acid solutions
Pavlík, Ondřej ; Bébar, Ladislav (referee) ; Jícha, Jaroslav (advisor)
The present thesis is concerned with neutralization of acid groundwater after the hydrochemical uranium mining in the area of Stráž pod Ralskem. In the thesis is briefly described progression of the hydrochemical uranium mining and follow-up negative impacts on the environment. There is described the technology involved in its disposal. This is followed by the design calculation of major apparatus technology associated with neutralization of acid solutions. Output of technology is determined by the mass balance. The results are the main dimensions of the apparatus, mechanical parts and electric power each device.
|
|
|
The screw conveyor of aggregate
Novák, Pavel ; Jonák, Martin (referee) ; Řezníček, Milan (advisor)
This bachelor's thesis deals with the design of the screw conveyor for transport of aggregate. It consists of a technical report containing mainly conceptual design of the entire device, calculation of the main dimensions, design a functional drive and choice of flexible shaft coupling, load calculation, selection and checking of bearings and strength control of structural components, plus drawings, which consists of a set of proposed installation, detailed subassemblies of the attachments of worm shaft in all bearings, welding subassemblies of the trough and production drawing of the input pin.
|
|
|
The Screw conveyor
Hadraba, Tomáš ; Pokorný, Přemysl (referee) ; Hloska, Jiří (advisor)
This bachelor thesis contains design and constructional solution of the horizontal screw conveyor which is used to transport hydrated lime according to set parameters. In thesis is given a calculation of the main dimensions, drive, conversion option and strength check of exposed parts of conveyor. The drawings are composed of the assembly of the proposed facility and individual details. The document was drawn up on the basis of technical report.
|
|
|
The screw conveyor for transport of grain
Pernica, Marek ; Jonák, Martin (referee) ; Řezníček, Milan (advisor)
This bachelor thesis deals with constructional solution and proposal of skew screw conveyor for transport of grain. In thesis is carried out calculation of main parts of screw conveyor, proposal of engine, proposal of enshrinement of screw, solidity review of screw shaft and solidity review of trough. Drawing documentation contains general device draw, subassemblies of all bearing lengths and welding subassembly of trough.
|
|
|
Worm conveyor
Sedláček, Martin ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with calculation and construction of worm conveyor for slightly sloping transport. The whole work is divided into two main sections, which include structural and textual parts. The text contains analysis of option for single parts of conveyor, functional and strength calculations, which are necessary for proposal of worm conveyor. The structural part includes mechanical drawings, which consists of drawing of configuration and drawings of details for worm shaft.
|
|
|
The Screw conveyor
Hadraba, Tomáš ; Pokorný, Přemysl (referee) ; Hloska, Jiří (advisor)
This bachelor thesis contains design and constructional solution of the horizontal screw conveyor which is used to transport hydrated lime according to set parameters. In thesis is given a calculation of the main dimensions, drive, conversion option and strength check of exposed parts of conveyor. The drawings are composed of the assembly of the proposed facility and individual details. The document was drawn up on the basis of technical report.
|
|
|
The screw conveyor for transport of grain
Ondra, Martin ; Škopán, Miroslav (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the constructional solution of mobile screw conveyor, which will be used for transport of grain, specifically wheat. There are calculations of main dimensions, drive with the gear options and with solidity controls of screw conveyor in the project. The work also solves the control of the frame which enables tilt of machine and which is equipped with wheels for transportation. The drawing documentation is based on the technical report together with the 3D CAD documentation of screw conveyor.
|
|
|
The screw conveyor of aggregate
Tocháček, Jakub ; Pokorný, Přemysl (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the conceptual design of horizontal screw conveyor for transportation of aggregate. The work consists of technical report and drawings. Technical report contains the calculation of main dimensions, selection of the drive, clutch and bearings, including stress analysis of functional parts. The drawings, which are based on model assembly processed in 3D CAD system, contains a drawing of the entire device, sub-assemblies of bearing seats and welding subassembly of trough.
|
guest ::
