|
|
Binders for supercapacitors electrodes
Gottwald, Tomáš ; Dvořák, Petr (referee) ; Sedlaříková, Marie (advisor)
This work deals with the issues of useing binders for supercapacitor electrodes and optimizing the technological process for their production. The work focuses on optimizing the amount of binder used in order to acheive the most capacity. The methodology consists of creating an appropriate experimental electrode and subsequent measuring its associated capacity with AutoLab. This aproach leads to creating grafs which show the dependencies of capacity on the amount of binder used.
|
|
|
Supercapacitor cycling device
Hába, Roman ; Háze, Jiří (referee) ; Dvořák, Petr (advisor)
The supercapacitor is a perspective electrical component reaching very large capacity. Currently is beeing worked on improving its parameters. These parameters are needed to test. Charging and discharging of the supercapacitor is theoretically fully reversible process. However, real supercapacitor accompanies ageing of the electrolyte and electrodes, lead to reduction of the capacity. The aim of this work is to design a device that expose supercapacitor to accelerated ageing, which will facilitate the assessment of ageing commercial and laboratory made supercapacitors.
|
|
| |
|
|
Aprotic electrolytes for supercapacitors
Musílek, Václav ; Knotek, Tomáš (referee) ; Dvořák, Petr (advisor)
This master´s thesis deals different types of the aprotic electrolytes for supercapacitors and investigates by impedance spectroscopy to conductivity and method cyclic voltametry to measure dimension potential windows. Used aprotic solvents: propylencarbonate, dimethylsulfoxide, N, N dimethylformamide, ethylencarbonate, dimethylcarbonate, diethylcarbonate and acetonitrile. In the aprotic solvents were appended salts: LiClO4, NaClO4, KClO4, LiBF4, LiPF6, TEABF4 and TMABF4. From these compounds were prepared solutions with the different molar concentrations.
|
|
|
Conducting polymers and their use in supercapacitors
Gottwald, Tomáš ; Zatloukal, Miroslav (referee) ; Dvořák, Petr (advisor)
This work deals with the issues of using conducting polymers for supercapacitor electrodes and optimizing the technological process for their production. The work focuses on optimizing the amount of polymer used in order to achieve the most capacity. The methodology consists of creating an appropriate experimental electrode and subsequent measuring its associated capacity with BioLogic. This approach leads to creating charts which show the dependencies of capacity on the amount of polymer used.
|
|
|
Perspective bus powertrains
Kubík, Jan ; Maršálek, Ondřej (referee) ; Píštěk, Václav (advisor)
The aim of this thesis is to consider possible future development of alternative powertrains with regard to their use in buses. First described are the most promising alternative fuel vehicles, which use an internal combustion engine. The next part is evaluated ways to store energy using electric drives. At the end of the work is mentioned hybrid technology as a combination of previous drives.
|
|
|
Hybrid drives of city buses
Hodas, David ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Bachelor’s thesis deals with an integration of hybrid buses in a public transport. It evaluates their environmental impact and possibilities of an application in traffic. Types of hybrid drives, system components and their interaction could be found here. It is focused on current status and chances of future development. In the final part there are economical aspects connected with bus transport.
|
|
|
Vehicle hybrid drive
Novák, Miroslav ; Prokop, Aleš (referee) ; Laurinec, Marián (advisor)
This bachelor thesis creates overview a modern hybrid drives car. In the thesis, there are the advantages and disadvantages all hybrid drives, availability and economy of operation. There is comparison of hybrid drives with internal combustion engines in conclusion.
|
|
|
Nonconventional Utilisation of Wind Energy
Zajíc, Josef ; Turek, Vojtěch (referee) ; Jícha, Jaroslav (advisor)
The thesis considers utilization of the wind energy as source of energy for the production of hydrogen. In the first part, there is described the types of wind engine specialized especially on screw wind engines and their construction. After that follows the description of dilemmas usage of electric energy addicted in time and with it connected problems with accumulation elektricity by the help of various methods. The final part of the thesis is than addicted to statistic evaluation of wind conditions, description and suggestion of the equipment hydrogen management.
|
|
|
Additional Drive of Road HPV
Novák, Lukáš ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor’s thesis is focused on the description of modern trends in additional drives of human powered vehicles study. It deals with the basic structures, the most important parts, recovery possibility and suggests future developments.
|
guest ::
