|
|
City within the City / "Trnitá City Block"
Žvak, Ondřej ; Květ, Radko (referee) ; Nový, Vítězslav (advisor)
The thesis deals with a design of a new construction of a polyfunctional urban house. It concerns a corner plot near the busy Opuštená avenue. The building is supposed to supplement the intended housing estate. Designed to be suitable for domestic, administrative and commercial use while maintaining an effective budget, the property is to provide the residents as well as the location with a high-quality space.
|
|
|
Low-floor apartment house
Weinlich, Petr ; Osička, Jan (referee) ; Čuprová, Danuše (advisor)
This bachelor’s thesis discusses design of a low-floor apartment house in city of Prostějov. It is an elaboration of its blueprints for construction realization. Apartment house consists of three (above-ground) floors with partial basement that provides home hardware. Upper floors provide home hardware aswell as communication and living equipment. On every floor there are three dwelling units, that make total of 9 units in the house. Vertical structural system of the building in its basement forms permanent formwork and in the upper floors the loadbearing masonry is made of Porotherm. Horizontal structural system is provided from cast-in-place reinforced concrete ceilings. The construction is cieled by a warm flat roof with asphalt roofing. The apartment house is considered as a Nearly zero-energy building.
|
|
|
Family house for two generations
Kuklová, Jana ; Novák, Michal (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor's thesis is the new construction of a detached two-generation family house in Horni Herspice, in the form of project documentation for construction. The object is designed as two separate units. One designed as barrier-free for the elderly, the other designed as a family house for a family of four. The building is designed as a masonry with reinforced concrete ceilings.The perimeter load-bearing masonry is made of 300 mm thick ceramic brick blocks and insulated with a 180 mm thick ETICS contact thermal insulation system. The internal load-bearing masonry is suitable from ceramic brick blocks 300 mm thick, the bathrooms are insulated from the room by an acoustic ceramic partition 200 mm thick. The internal non-load-bearing masonry is designed from 115 mm thick ceramic brick blocks. The staircase is designed as a reinforced concrete monolithic. The floors are designed as heavy, floating. The roof above the 1st floor is designed as a green flat roof, above the 2nd floor there is a single-skin flat roof. From the second floor there is access to the terrace. Hole fillings are designed as plastic. Behind the building is a spacious garden.
|
|
|
Villa apartment in Masaryk district
Chriašteľová, Nikola ; Šubrt, Jan (referee) ; Dulenčín, Juraj (advisor) ; Petříček, Tomáš (advisor)
The subject of this bachelor thesis is the design of HR villa house in Masaryk's’ district, Brno. The Masarykova čtvrť (original name of this part) is characterized by its historical and functionalist development, with villas of Brno factory workers and German officials, remaining small garden city. In the surroundings, we can find buildings from architects such as Ernst Wiesner or Bohuslav Fuchs. Strong genius loci, corner location of the plot and the views from the north-facing slope were a key to the concept of my design. Main idea is to create residential with a higher standard of the current requirements of living, while at the same time, it's mass and the material solution will complement the character of the surrounding development. HR villa house is a four-storey building with a sloped 4th floor and a rounded corner complemented by bay windows. The shape of the building was created in response to neighbouring semi-detached houses. Its shape complements the imaginary curve, which is created as a connection of these objects. There is 1 housing unit on each floor. Moreover, apartment on the first floor has own adjacent garden. The common roof terrace offers not only views of Brno, but also supports community activities of the residents.
|
|
|
Retirement center in Velké Poříčí
Vondrová, Michaela ; Herman, Adolf (referee) ; Bantová, Sylva (advisor)
It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.
|
|
|
Hotel
Neuwirth, Filip ; Pažourek, Vít (referee) ; Rusinová, Marie (advisor)
The diploma thesis processes project documentation for the construction of a hotel building with a restaurant facility, which is situated on the outskirts of the western undeveloped part of the regional town Jihlava. The building has three floors and is covered by flat roofs. The hotel meets the conditions of a four-star (****) economic standard. It is designed with 24 accommodation units with a capacity of total 52 persons (4 persons with reduced mobility on the 3rd floor) and restaurant service for 92 guests, social facilities and kitchens. The apartments and guest rooms are located on the 2nd and 3rd floor. On the ground floor there is a representative space of the hotel composed of the entrance hall with reception , space for hotel management, space for technical facilities of the building and restaurant with its own kitchen. The building meets the requirements for zero-energy buildings with a combination of a high-quality construction solution with thermal insulation of building and other technological solutions such as photovoltaic power plants or deep boreholes for stepping pump heating The overall character of the building is emphasized by its architectural design in the light of modern lining of the ventilated facade using cement-fiber boards, whose two-color articulation emphasizes both simplicity and shape function of the building. This solution is combined with large glazed areas that give the building a feeling of spaciousness and evocative cleanliness.
|
|
|
Residential building in Křoví
Dvořáčková, Karolína ; Woytela, Jindřich (referee) ; Benešová, Romana (advisor)
This bachelor´s thesis deals with design and elaboration of project dokumentation of apartment building. The building is located in a village called Křoví on plot No. 756/50. The apartment building have four above-ground floor and one place for a rent. In the basement there are situated social spaces and cellars for each flat. The structural system of building is designed from clay block Porotherm 30 Profi and the floor structure is designed from prefabricated rib-and-filler floor Porotherm. Vertical load-bearing structure on the basement is designed from permanent formwork. The building is insulated witr contact thermal insulation. The roof construction is designed as a warm flat roof.
|
|
|
Apartment building
Šibalová, Lenka ; Novák, Michal (referee) ; Daněk, Lukáš (advisor)
The goal of this bachelor thesis is elaboration of project documentation of new apartment building. The building is alone standing and is situated on several lands of one investor in city of Kyjov in cadastral territory Kyjov [678431]. The building has one underground floor and four above ground floors. In the basement are designed eight parking spaces, small warehouses, technical room, bicycle room and a boardroom. The vertical supporting structure of above ground floors are made from ceramic blocks and the vertical supporting structures of the basement are made from impermeable concrete. The supporting horizontal structures are designed as monolithic reinforced concrete slabs. The whole building is insulated by contact thermal insulation system. The roof is flat and designed as green. Project documentation was prepared according to valid legal and technical regulation.
|
|
|
A family house with an establishment
Popelka, Michal ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This bachelor thesis is focused on design of family house with an establishment serving as financial consultancy. The object is located in cadastral area of Strání and has a partial basement with two above-ground floors. The house is established for four member family. External walls of the basement are bulit of permanent formwork. External walls of above-ground walls are bulit of clay blocks Porotherm 30 Profi with contact thermal insulation system ETICS. Horizontal load-bearing structures are formed by prefabricated rib-and-filler floor system MIAKO. Staircase is designed as two times bent slab. Part of the object is roofed with a warm flat roof, the other part with roof truss with roof slope of 35°.
|
|
|
The flat building in Znojmo
Krátká, Kristýna ; Fixelová, Veronika (referee) ; Beneš, Petr (advisor)
The bachelor’s thesis aims to elaborate on the project documentation of the residential building in Znojmo, which is located close to the city center. It is a three-storey building with a partial basement. There are 10 apartments and 1 studio in total located in the residential building. There are 4 shops designed on the ground floor. The structural system of the building is designed as a masonry Porotherm system. Fasade is insulated with an external thermal insulation system (ETICS). The floor structure consists of a prestressed concrete floor slabs Spiroll. The roofing of the building is solved by a warm flat roof.
|
guest ::
