|
|
Design of synchronous spoke motor
Kopecký, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
This thesis is focused mainly on the theoretical research of permanent magnet synchronous motors. In addition, various methods of designing the motor‘s magnetic circuit are discussed and their advantages and disadvantages are compared. The reluctance network method is analyzed more thorough, because this method is used for motor designing process. In the last part the results obtained by reluctance network are compared with the results evaluated by finite element method.
|
|
|
Design of Line-start synchronous machine
Lolová, Iveta ; Klíma, Jiří (referee) ; Bárta, Jan (advisor)
This thesis deals with line-start permanent magnet synchronous motor, because in these days the world focuses on energy saving more than ever. Line-start permanent magnet motors represents a possible replacement for asynchronous motors, which are the most used kind of motors and constitute one of the greatest energy consumption apparatuses in the world. The efficiency improvement of induction motors is usually achieved through design optimization of induction motors resulting in limited degrees of success. This thesis also thoroughly explains LSPMSM topology and compares properties of the line-start permanent magnet motors and asynchronous motors. This thesis deals with the design of line-start permanent magnet synchronous motor based on previously designed asynchronous motor. In the last chapter LSPMSM is investigated in RMxprt and Ansys Maxwell.
|
|
| |
|
|
DC motors for general purposes.
Randa, Daniel ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
This work deals with innovation DC permanent magnet motor for low power. The work is divided into three tasks. The first part is to survey serially produced DC motors. The second part is to choose one particular DC motor drawn from the survey and carry out its analysis and detailed description. The last part is to design innovations to selected DC motor.
|
|
|
Design of PMSG for micro hydro power plant
Skurka, Tomáš ; Ondrůšek, Čestmír (referee) ; Huzlík, Rostislav (advisor)
This bachelor’s thesis deals with a design and simulation of various implementation of the synchronous generator for a low-speed waterwheel. The construction of the generator was implemented as the radial synchronous generator with the permanent magnets on the rotor’s surface. In the introduction the reader gets familiar with the theory describing the construction of the synchronous generator with the permanent magnets intended for the small hydroelectric power plants. Within the thesis the author shows his own design of the generator and the optimization using the genetic algorithm. Next, three proposals with the predefined sheets are presented. Every single proposition of the generator was simulated in the software ANSYS Maxwell. Finally, the heat calculation was made for the certain designed variations of the generator.
|
|
|
DC motors for general purposes.
Randa, Daniel ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
This work deals with innovation DC permanent magnet motor for low power. The work is divided into three tasks. The first part is to survey serially produced DC motors. The second part is to choose one particular DC motor drawn from the survey and carry out its analysis and detailed description. The last part is to design innovations to selected DC motor.
|
|
|
Analysis of concentrated windings of PMSM
Menoušek, Lukáš ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
This thesis deals with the design, principles of permanent magnet synchronous machines and an analysis of their properties. As part of the work is done familiarization with the materials of permanent magnets and their arrangement, as well as construction of the engine where they are discussed types of winding machine configuration, types of motors with permanent magnets and the list of implemented solutions. In the next part of this work is performed analytical calculation of the two types of engines, with concentrated winding, created models based on calculations in FEMM focusing on the creation of spatial harmonics. Further the model in RMxprt and data from the simulations were compared with analytical computation. Finally the model was created in Maxwell and compared with the analytical results of calculation and simulation in RMxprt program. For this model was created analysis of losses in permanent magnets.
|
|
|
Design and modernization of automotive starter
Bednář, Vojtěch ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The work deals with modernization of an automobile starter. In first and second part, we can find the analysis of types of starters according to construction and the analysis of gear of a starter. In third part, there is the analysis of electromagnetic layout of direct current motor with permanent magnets according to given parameters which is the gear of given starter.
|
|
|
Analysis of concentrated windings of PMSM
Menoušek, Lukáš ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
This thesis deals with the design, principles of permanent magnet synchronous machines and an analysis of their properties. As part of the work is done familiarization with the materials of permanent magnets and their arrangement, as well as construction of the engine where they are discussed types of winding machine configuration, types of motors with permanent magnets and the list of implemented solutions. In the next section of this paper is an analysis of the properties of selected types of concentrated winding with a focus on the emergence of harmonics. These data are compared with the model of the engine in the FEMM. Furthermore, a comparison of the calculations of these types of engines and their simulation in RMxprt.
|
|
|
Automotive Electric Motors Innovation
Vejtasa, Leoš ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
There are a lot of electric motors for different applications in a car. Some of the cars contain over 50 electric motors. The majority has direct current motors. In this semestral thesis there are described all types of direct current motors used in the car and their applications in the car. You can also find here the ways of development of direct current motors in the near future. There is also an analysis of the issue of permanent magnets use in DC motors and their construction scheme.
|
guest ::
