|
|
Project of worm gear for lift mechanism
Otisk, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This graduation thesis dwells on a worm gear design for an elevator mechanism in an already existing wheel case with actuator unit S3 for elevator type BOV 320/0,63. The work includes dimensional and control calculation for the worm gear and as an attachment you will find spiral worm and worm gear drawing documentation, including its specific location.
|
|
|
Steam turbine with ejector
Slezáková, Iveta ; Ing.Drahomír Maša (referee) ; Fiedler, Jan (advisor)
The main Target of this diploma is to find some reconciliation with cooperation of turbine and ejector. This work is containing informations about this mechanisms and also its historical development. The merits of this diploma thesis is thermodynamics calculation and proposal of main parameters and proportions of the turbine and the ejector. After this it is follow by the calculation of whole system of the turbine and ejector in consequence with calculation of turbine with by-pass regulation and also comparison of power output with ejector and with by-pass technology.
|
|
|
Automotive Alternator Innovation
Volek, Martin ; Hýsek, Roman (referee) ; Hájek, Vítězslav (advisor)
The work deals with the analytical electromagnetic design of automotive claw-pole alternator 14V/120A. This design is verified in program Maxwell with a RMxprt tool. The results of both calculations are compared. Designed alternator is also compared with the results measured in the laboratory on the alternators of similar type. Furthermore, there are analyzed individual power losses of machine and listed options of reducing these losses, which results in an increase in overall efficiency.
|
|
|
Ventilation calculations in synchronous machine
Judas, Jan ; Deeb, Ramia (referee) ; Janda, Marcel (advisor)
The aim of the project was to get familiar with the environment of ANSYS CFX, create several models of fans and synchronous machine model in Autodesk inventor, create model of cooling medium flow through the machine with these fans and evaluation of results. Firstly the thesis describes the synchronous machine itself, losses of the machine, the flow of power of synchronous machine and methods of its cooling. Next the thesis describes each kind of heat transfer, laminar and turbulent flow. The thesis also refers of kind of the fans and the program used to calculate the flow Ansys CFX, including the method that Ansys used to calculate. The work describes the individual modification of fans and setting of calculation in ANSYS. Then displays the results of the analysis these fans for different numbers of fan blades and for modification of the fan. Then the thesis analyzes selected modifications due to changing speed. In the last chapter shows the analysis of flow in the machine with three different fans. In particular, there is shown the mass flow rate, pressure and its distribution on areas for evaluation.
|
|
|
Converters controling
Nevoral, Jiří ; Steinbauer, Miloslav (referee) ; Fiala, Pavel (advisor)
Bachelor´s project is study of DSP microprocessor problems to converters controlling with asynchronous motors and execution of a project. Study includes information on quality single type processor, benefits and disadvantage whole solving. Of purpose is DSP converters control with DMC1500.
|
|
| |
|
|
Design of a upright drilling machine
Matoušek, Kamil ; Bilík, Martin (referee) ; Blecha, Petr (advisor)
The subject of this thesis is to propose a design of an upright drilling machine. The upright drilling machine is described in the first part. Research about machines available on the market nowadays is accomplished in the second part of the thesis. Based on this research the parameters of machine are selected in the final part and proposal of the engineering design of an upright drilling machine. Basic construction calculations are made too. The result of this thesis is an assembly drawing and a 3D model of an upright drilling machine.
|
|
|
Aerodynamic noise of computers
Zouhar, Lukáš ; Dušek, Daniel (referee) ; Pellant, Karel (advisor)
This submitted thesis pursues a theme of decreasing the computer noise, especially focusing on the aerodynamic noise of the cooling fans, possibilities of decreasing the noise by fan optimization, using rubber bolsters and sound-isolating layers or construction changes in the very fans and their placing. We shall also aim on the relation between the created noise and the blade shape or rotation speed.
|
|
|
Two-speed gearbox
Kratěna, Jan ; Pokorný, Přemysl (referee) ; Ždímal, Pavel (advisor)
The objective of this work was to create the „Technical Documentation of Two-Speed Transmission“. The submission included a brief content of the demanded work. At first, calculations of gear ratio, tooth system dimensions and module were performed. Subsequently calculations of single tooth wheel loads and their safety were performed. After the tooth system calculation the shaft, bearings and key calculations followed. The Technical Documentation was completed with pictures and charts that illustrate the individual load points. A 3D model of the two-speed transmission inclusive detailed drawings of the individual shafts and tooth wheels were created as a part of the documentation as well.
|
|
| |
guest ::
