|
|
Apartment Building in Ostrava
Adámková, Marie ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is the preparation of project documentation for the new construction of an apartment building in Ostrava. The proposed building is a five-story, partially basement building with an accommodation capacity of 20 people. The structural system is a transverse wall, the load-bearing masonry of the above-ground floors is made of ceramic blocks with external contact insulation. The masonry of the basement is designed as reinforced concrete monolithic. The apartment building is covered with a flat roof. The underground floor and the first above-ground floor serve as the technical background of the entire house. In the basement there are storage spaces in the form of cellar cubicles. On the first above-ground floor there is a technical room, a cleaning room, a bicycle shed, a stroller room and garages.
|
|
|
Apartment building, Sadová
Takács, Roland ; Pěnčík, Jan (referee) ; Kolář, Radim (advisor)
The subject of this bachelor's thesis is the preparation of project documentation for the construction of a residential building. The apartment building is located in the Brno - Sadová district in an area designated for mass housing. The plot for the new residential building is flat. The apartment building is designed as a standalone structure with three above-ground floors and a partial basement. It contains 9 residential units. The entire building is covered with a single-layer green roof. The parking area consists of 15 parking spaces, 2 of which are designated for disabled individuals. Both the vertical load-bearing and non-load-bearing structures are made of Porotherm ceramic blocks. The horizontal load-bearing structures are made of pre-tensioned Spiroll floor panels. The balconies are monolithic with an Isokorb system. The staircase is a two-flight slab staircase. Insulation is provided by mineral wool in formworks. The following programs were used for the preparation of the project documentation: Autodesk REVIT, Autodesk AutoCad, Building Design
|
|
|
Apartment building
Parák, Štěpán ; Kacálek, Petr (referee) ; Sedláková, Markéta (advisor)
The subject of the bachelor’s thesis is project documentation of new appartment building in Pohořelice on street U kasáren. The proposed object is in the existing housing development of the city. It is a basement four-story apartment building with balconies and a flat roof. In the basement there is a cellar cubicle, 2 technical rooms, a bicycle shed, a carriage shed and a cleaning room. On the first above-ground floor, there is an apartment unit for people with limited mobility, as well as a barbershop, a dental office, and a switchboard room. There are 2 3+kk apartment units and one 1+kk apartment unit on the regular floor of the apartment building. The wall support system in the above-ground part is made of ceramic blocks, which is insulated with the ETICS system. The perimeter walls of the underground floor are made of lost formwork, and the internal load-bearing walls are made of ceramic blocks. The building will be based on monolithic concrete belts and a reinforced concrete slab. The ceiling structures are semi-assembled from ceramic concrete beams and ceramic inserts in combination with monolithic concrete additions and balcony slabs.
|
|
|
Residential building
Sojčák, Patrik ; Vlach, František (referee) ; Vajkay, František (advisor)
The subject of the bachelor thesis is the project for realisation of the construction of the apartment building with almost zero consumption of energy. The main goals of the thesis include design of layout, construction and material solutions. Apartment building is located open land in north-east part of city part Brno-Lisen. It is four story fully basement building. None of the apartments are design for people with limited mobility, however the entrance to building is barrier-free. The vertical bearer structure of overground part of building is made of sand/lime bricks, the vertical bearer structure of underground part of the building is made of reinforced concrete beams and walls. The building is based on reinforced concrete slab because of bad geotechnical conditions in the area. Perimeter walls of overground part of the building are created as sandwich walls from sand-lime bricks and thermal insulation. Underground perimeter walls are created from reinforced concrete with thermal insulation. Horizontal bearer structure is made od reinforced, monolithic concrete slabs. The roof is design as a flat single-skin roof with walking function. The apartment building has 24 apartments, storage units and underground parking spaces. The building has been assessed for fire safety, thermal engineering, acoustics, sunlight and daylight and has met all investments and state regulatory requirements.
|
|
|
Construction technology stage of the superstructure of an apartment building in Karlovy Vary
Žemla, Jakub ; Řihák, Pavel (referee) ; Kantová, Radka (advisor)
This bachelor thesis focuses on the construction technology stage of the superstructure of an apartment building in Karlovy Vary. The main objective is to design optimal procedures and technologies for the construction of the superstructure, which includes monolithic reinforced concrete structures, infill masonry, and related works. The thesis provides detailed descriptions of technological processes such as formwork, rebar tying, concreting, and curing of concrete structures, as well as organizational aspects of the construction including material supply, storage, and sanitary facilities for workers. The analysis focuses on the economic comparison of different technological process variants and their impact on the project’s time and financial schedule. The result is a recommendation of the most efficient construction variant that meets the requirements for quality, safety, and economic efficiency.
|
|
|
Apartment building
Kyselák, Jan ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The subject of the bachelor's thesis is the project documentation for the construction of an apartment building with nearly zero energy consumption. The plot is in the eastern part of the town of Třebíč, in a partially built-up area. The terrain slopes towards the southern side of the plot. The building is situated in the southeastern part of this plot. It is a standalone brick apartment building, topped with a flat roof covered with PVC-P membrane waterproofing. The building consists of two main rectangular blocks placed side by side, with their longer sides parallel to the local service road (Modřínová Street). A third smaller block forms the entrance to the roof. The building also features balconies on three sides. The apartment building has one underground floor and four above-ground floors, containing a total of 15 residential units. The underground floor includes a communal garage for 5 vehicles, utility facilities, and storage spaces. Additional storage spaces are located on the first above-ground floor, which also houses the main entrance to the building. The vertical structures are designed using the Porotherm system. The basement perimeter walls, and ceiling structures are made of monolithic concrete. The staircase is prefabricated with Schöck elements for impact sound insulation. The building has been assessed for fire safety and building physics.
|
|
|
Apartment building
Kadlecová, Lucie ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The goal of this bachelor's thesis is the preparation of project documentation for a new building apartment building, which will meet the requirements and conditions for a building with almost zero consumption energy. This apartment building was designed so that its operation does not disturb or did not restrict the operation of adjacent apartment buildings on neighboring land in the immediate vicinity. The apartment building is designed as four floors, partially with a basement. They are in an apartment building dimensioned storage spaces, technical background of relevant technologies, social premises serving as a place of recreation for BD residents and separate housing units. Total the number of housing units is 12.
|
|
|
Apartment Building
Nedomanský, Vojtěch ; Zichová, Barbora (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation at the construction implementation level for an apartment building. The subject of the bachelor's thesis was the appropriate use of structural, thermal-technical, and material solutions. It is a basement four-story apartment building of irregular shape, which contains a total of 13 apartment units, with each apartment unit assigned a basement storage room located in the basement part of the building. The building is founded on strip foundations and a base slab. The vertical load-bearing system of the above-ground floors consists of Therm-type ceramic blocks with a certified contact insulation system. The vertical load-bearing system in the basement floor is made using lost formwork blocks filled with concrete. Therm-type acoustic blocks are used for the internal load-bearing walls. Monolithic reinforced concrete ceiling slabs were designed as the ceiling structure. The apartment building is roofed with a single-layer flat green roof with a constant slope, which is prepared for the placement of photovoltaic panels to utilize alternative energy sources.
|
|
|
Apartment House in Břeclav
Kacrová, Marie ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for a apartment building in Břeclav. The building is constructed using the POROTHERM system, it has a basement, and a pitched roof. It is a building with three above-ground floors, housing residential units. The underground floor contains the technical facilities of the building. Furthermore, a standalone garage with 4 parking spaces is designed, also constructed using the POROTHERM system and having a flat roof. The roofing of the building consists of a double-layer pitched roof with the supporting structure made of trusses. The building is insulated using thermal insulation blocks in the above-ground part and extruded polystyrene in the underground part. The footprint of the aparment building is 164.60 m2 and the garage is 92.40 m2.
|
|
|
Apartment building
Hipp, Dominik ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
This Bachelor thesis elaborates the project documentation of a residential building in the phase of construction documentation. According to the assignment, the residential building is located in the area of Central Moravia, specifically in the western suburbs of Moravská Třebová. The building is located on a sloping parcel with an elevation of ap-proximately 1,5 m at the site of the building. The building itself is a three-storey apartment building with basement designed in a standard with almost zero energy consumption. The residential building consists of three residential units 2+kk and 3+kk with common areas and facilities in the basement of the building. Structurally, the building is designed as a transverse wall with vertical structures of ce-ramic bricks, foundation strips of plain concrete and horizontal structures of ceramic blocks. These structures are complemented by a sloped roof consisting of a gambrel truss that defines the top floor as an attic.
|
guest ::
