|
Control of industrial robot drives by KEBA systems
Heinrich, Martin ; Pochylý, Aleš (referee) ; Kubela, Tomáš (advisor)
This diploma thesis deals with the implementation of the KeMotion control system of KEBA company for industrial robot KUKA KR 15/2. It gets to work original robot's drives KUKA with this new system. There was a communication network built up to operate the system itself. It was created between driving system component. Next step was a creation of the connection between control case and a new control system especially robot link up feedback. Later on there was a control programme for PLC created and adjusted including configuration of drives and converter. There was a need to find out the resolver parametr to this settings That one is used to the indirect measurement.
|
|
Artificial aorta for activity demonstration of intraaortal baloon contrapulsation
Bičiště, Jan ; Rampl, Ivan (referee) ; Zeman, Václav (advisor)
This dissertation work describes design and construction of simulated aorta device intended to demonstrate performance of the intra-aortal balloon catheter (IAB), and to test reaction of the contra-pulsation pump during simulated cardiac output in conditions of tachycardia, bradycardia and arrhythmia. The major part of the device is transparent plastic tube. The pressure pulses (waves) are generated inside this plastic tube to simulate real cardiac output. These pressure pulses are generated by step motor with membrane. The step motor is controlled by programmable control system AMiNi-E. Individual pressure pulses simulate cardiac output in conditions of tachycardia, bradycardia and arrhythmia. Required simulated cardiac output is selected by control switches. Generated pressure pulses are read by pressure sensor and are transferred to the control system of the configuration computer. Read data can be displayed as graphs in program Microsoft Excel. The intra-aortal balloon catheter (IAB) is inserted inside the aorta and is connected with contra-pulsation pump which on pressure pulse is responding.
|
| |
| |
|
SW model of PLC controlled crossing
Simon, Jakub ; Bílek, Michal (referee) ; Zezulka, František (advisor)
The objective of this thesis is to create a software model to control various types of crossroads using programmable logic controller. The control system is created on Siemens PLC SIMATIC S7-300. The programmes of system are written in different programming languages such as GRAPH, STL, LAD. The visualisation is also created to control by using of SCADA system InTouch from the company Wonderware. The visualisation comunicates with the PLC using a DAServer. The visualisation has both, input and output elements, so it is not intended for supervising the run of the control system only, but also for simple user‘s control, using a graphical user interface. It is possible to control the start and stop events of the system, and to switch between different crossroad's control modes and also to trigger the pedestrian's button.
|
| |
|
Garage Control System with Remote Supervision
Urban, Jakub ; Kaczmarczyk, Václav (referee) ; Arm, Jakub (advisor)
This bachelor’s thesis describes control system of garage with remote monitoring. The first part is only theoretical and it deals with automation elements of the garage. Next part describes the choice of appropriate platform and its means of programming. Following part describes means of control of the garage door. Final part is dedicated to remote monitoring.
|
|
The control system of the machine for the manufacture of special springs
Šálek, Jan ; Zemánek, Pavel (referee) ; Pásek, Jan (advisor)
This bachelor thesis deals with design and implementation of a machine manufacturing specific sort of springs which are used in fluorescent light covers. The machine consists of a PLC automaton, servomotors, which purpose is the springs' bending and shaping, and a touchscreen/touch panel as the user interface. Non-qualified operating staff has been concidered in the design, therefore all the functionality is to be easily accessible and user-friendly.
|
|
Design and implementation of control software libraries for fiber characterization
Podivín, Ladislav ; Hästbacka, David (referee) ; Kallio, Pasi (referee) ; Honzík, Petr (advisor)
Tato práce se zabývá návrhem a implementací dvou konkrétních softwarových modulů, které jsou částí distribuovaného řídícího systému CoSMic. Tento systém je určen pro řízení speciálního zařízení pro charakterizaci papírových vláken. Prvním vyvinutým modulem je HapticFiber, ten má poskytovat rozhraní mezi řídícím systémem a speciálním vstupním zařízením - haptic device. Druhým modulem je ViCo, jehož účelem je poskytnout softwarovou obálku pro uživatelem definovaný algoritmus zpracovaní obrazu. Tento modul musí být připraven splnit určitá časová omezení, proto je nutné, aby běžel v rámci operačním systému reálného času.
|
| |