|
|
Two-stroke engine
Štrba, Matej ; Píštěk, Václav (referee) ; Kaplan, Zdeněk (advisor)
The aim of this thesis is description of a design, development of a two-stroke engine, its modernization, possibilities of the modifications and thus the change of the performance parameters and subsequent applications of some modification on the engine of passenger car Trabant.
|
|
|
A two stroke engine for paragliding
Šafařík, Petr ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
This diploma thesis deals with the design of a two-stroke engine for paragliding. First of all, the different types and designs of two-stroke engines are discussed. After the design of the crank mechanism, the forces in the engine are tested, followed by the strength control of selected components. In addition, the work includes design of individual engine components, propeller reducer and 3D models of components and motor unit.
|
|
|
Single-Cylinder Two-Stroke Engine for Enduro Motorcycle
Koten, Stanislav ; Janoušek, Michal (referee) ; Drápal, Lubomír (advisor)
This thesis deals with the construction of two-stroke motorcycle engine. Specifically, the racing engine for the Enduro class with a displacement of 250 cm3, adapted to be mounted in a chassis with extremely long swingarm according to patent of Frantisek Krnavek. The introduction briefly describes the E2 class rules and discussed design powertrain solutions of this class. Following design and calculation of required motor parameters. Further attention is devoted to detailed calculation of main bearings lifespan. The next section describes in detail the construction of the crank mechanism, cylinder head, exhaust pipe, power valve and reed valve. Conclusion deals with location of other engine parts.
|
|
|
Increasing Single Cylinder SI Two-Stroke Engine Performance
Stejskal, Miroslav ; Drápal, Lubomír (referee) ; Svída, David (advisor)
This thesis deals with two-stroke engine design modifications to enhance its performance parameters. The introduction summarizes the various solutions of two-stroke engines. The next part deals with design modifications of the engine power, their implementation and subsequent modification. The work includes strain and stress analysis of the piston, which includes a complete indication of pressures in two-stroke engine. The achieved results of FEM analysis were used to design better piston geometry.
|
|
|
Innovation of built-up crankshaft for minibike engines
Doležal, Lukáš ; Mazůrek, Ivan (referee) ; Hanuš, Stanislav (advisor)
The present diploma thesis deals with innovation of built-up crankshaft of Blata minibikes. Minibike is the type of a small two-stroke motorcycle equipped with an internal combustion engine of the volume 40 or 50 cm3. The machine is designed for racing circuits; not only for young riders but also for seniors. The innovation is in the design and verification of pressed connections in the imposition of major pins in the arms of the crankshaft. Pressed connections are designed on the basis of the analysis of force interaction on the crankshaft at maximum revolutions. The proposed solutions are verified by FEM calculations. Based on the results, the best option is selected. For the selected option, the impact of force interaction at maximum machine performance is studied. Finally, on the basis of these facts, designing, technological and economic analysis of feasibility of new production technology is carried out.
|
|
| |
|
|
Two-stroke Engine Pre-ignition Controller with Microcontroller
Veselý, Tomáš ; Vorel, Pavel (referee) ; Šebesta, Jiří (advisor)
This paper deals with the problem of two-stroke engine pre-ignition controller with the use of microcontroller for single-cylinder engine and double-cylinder engine. The mechanical design is drawn for motorcycles JAWA and ČZ and for engines of the same mechanical type. The establishment uses non-contact status analysis of engine with non-electric sensor. The very important thing for the design is the simplicity of the establishment. The other important thing is the minimisation of mechanical arrangement of engine and the vehicle as a whole. The importance of this establishment is non-contact switching and the possibility of changing pre-ignition maps depending on the number of rotations per minute, the temperature and the load of the engine.
|
|
|
The future of gasoline two-stroke engines
Kříž, Jakub ; Komenda, Lukáš (referee) ; Mazůrek, Ivan (advisor)
My thesis deals with the historical development of two-stroke petrol engines from the very establishment of a two-stroke cycle, mapping the technological development of these engines up to present day, where, in the second half the attention is devoted to the direct comparison of two-stroke engine and a four-stroke engine in the field of ultralight aircrafts.
|
|
|
Piston group of a one-cylinder gasoline engine
Lux, Josef ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
This thesis deals with a piston set of the internal combustion engine. The main goal is to perform strength check analysis of the internal combustion engine piston set using analytical methods of elasticity and strength. Cultivator PF-62 was chosen to determine the basic parameters of the crankshaft mechanism and plot the force distribution. Results of the strength check analysis are evaluated in the final part of this thesis.
|
|
|
Cylinder unit of motocycle two-stroke engine
Stejskal, Miroslav ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Miroslav STEJSKAL Cylinder unit of motorcycle two-stroke engine In the beginning is briefly described two-stroke engine features. Furthermore, according to the set of basic geometric and thermodynamic parameters, the maximum pressure in the cylinder during one engine cycle. For the selected operating modes are carried out strength tests of the upper piston and connecting rod eye. In conclusion, the results are evaluated.
|
guest ::
