National Repository of Grey Literature 20,605 records found  beginprevious21 - 30nextend  jump to record: Search took 0.48 seconds. 

Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_22316111113040 - Download fulltextPDF

Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.

Marketing plan
Nosálová, Lucie ; Štůsek, Jaromír (advisor) ; Ladislav , Ladislav (referee)
The goal of this thesis is to detect errors in the management of small family business, which basically does not use marketing. Following this finding should be to build an effective marketing plan. The diploma thesis is divided into theoretical part, which forms the basis for the analytical part. In the analytical part is described the company and there are also detect errors in the management that are caused by faulty marketing. To achieve results it is important to use several different types of analysis on which it is necessary to set new marketing goals, strategies, changes and projects. The aim is to provide business information and convince him that use of good marketing communication should lead to improve management efficiency and ultimatem increase profitability of the company, without the need to break away from the corporate goal of maximum efforts to build a pro-customer oriented service.

Tenancy spouses and use of the flat spouses in a new arrangement after January 1, 2014
Prantlová, Soňa ; Kadlecová, Eva (advisor) ; Pavla, Pavla (referee)
The thesis is devoted to the topic of tenancy by the spouses, and its use as is specified in the new adaptation of the Civil Code no. 89/2012 Coll. It replaced until functioning Civil Code from the year 1964. The new legislation is specified series of new institutes, whose primary aim is to protect the weaker party, in the case of tenant. The diploma thesis was divided into theoretical and practical part. In the theoretical part, was attention paid to basic concepts which have been defined. There were characterized rights of tenant and landlord, analyzed housing legislation according to the new Civil Code. The practical part was devoted to the interpretation of survey results. There were approached tenants of several apartment buildings in Kralupy nad Vltavou. Based on the findings, were designed some recommendations to raise awareness about the rights and responsibilities of tenants, as well as about the whole issue of housing legally.

Partial Report IV / 2016 - Rating of the deformation stress monitoring the state of the rock mass during mining coal seam 30 (634) within the trial operation of mining method corridor - a pillar in OPJ ČSM - NORTH
Waclawik, Petr ; Ptáček, Jiří ; Kukutsch, Radovan ; Kajzar, Vlastimil ; Koníček, Petr ; Souček, Kamil ; Staš, Lubomír
Monitoring of the deformation stress state of the rock mass is a prerequisite for the verification of unapproved new mining methods hall-pillar and its further application in the Czech part of the Upper Silesian coal basin. This mining method is designed on the basis of experiences and practices that are verified in different natural conditions and depths below the surface and is therefore essential for the verification of conditions for the Czech part of the Upper Silesian Basin based on geotechnical monitoring. The present report is prepared on the basis of a contract no. 942/50/10, where the Institute of Geonics, v.v agrees to make periodic evaluation of monitoring data napěťodeformačního state of the rock mass. In accordance with the aforementioned agreement, the message is processed in the six-month period and continues in the interim report III / 2015 (Waclawik et al. 2015) passed buyers in April this year. Interim results of the geotechnical monitoring, such as the experience gained during the first conquest dobývky V show specifics of natural conditions in trial operation unapproved new mining methods hall-pillar.
Fulltext: content.csg - Download fulltextPDF
Plný tet: UGN_0464907 - Download fulltextPDF

Optical fiber sensors and optical fiber splicing
Jelínek, Michal ; Mikel, Břetislav
We present development of new methods and techniques of the splicing and shaping optical fibers. We developed new techniques of splicing for standard Single Mode (SM) and Multimode (MM) optical fibers and optical fibers with different diameters. Together with development these techniques we prepared other techniques to splicing hollow core Photonic Crystal Fiber (PCF) and theirs cross splicing methods.Development of these new techniques and methods of the optical fibers splicing are made with respect to using these fibers to another research and development in the field of optical fibers sensors.

Automata in Infinite-state Formal Verification
Lengál, Ondřej ; Jančar, Petr (referee) ; Veith, Helmut (referee) ; Esparza, Javier (referee) ; Vojnar, Tomáš (advisor)
Tato práce se zaměřuje na konečné automaty nad konečnými slovy a konečnými stromy, a použití těchto automatů při formální verifikaci nekonečně stavových systémů. Práce se nejdříve věnuje rozšíření existujícího přístupu pro verifikaci programů které manipulují s haldou (konkrétně programů s dynamickými datovými strukturami), jenž je založen na stromových automatech. V práci je navrženo několik rozšíření tohoto přístupu, jako například jeho plná automatizace či jeho rozšíření o podporu uspořádaných dat. V práci jsou popsány nové rozhodovací procedury pro dvě logiky, které jsou často používány ve formální verifikaci: pro separační logiku a pro slabou monadickou druhořádovou logiku s následníkem. Obě tyto rozhodovací procedury jsou založeny na převodu jejich problému do automatové domény a následné manipulaci v této cílové doméně. Posledním přínosem této práce je vývoj nových algoritmů k efektivní manipulaci se stromovými automaty, s důrazem na testování inkluze jazyků těchto automatů a manipulaci s automaty s velkými abecedami, a implementace těchto algoritmů v knihovně pro obecné použití. Tyto vyvinuté algoritmy jsou použity jako klíčová technologie, která umožňuje použití výše uvedených technik v praxi.

Subspace Modeling of Prosodic Features for Speaker Verification
Kockmann, Marcel ; Kenny, Patrick (referee) ; Nöth, Elmar (referee) ; Černocký, Jan (advisor)
Předložená disertační práce se zabývá ověřováním mluvčího pomocí prozodických příznaků zahrnujících hodnoty základního tónu, energie a délek řečových úseků. Studovali jsme dvě rozdílné techniky pro parametrizaci: první vede k dobře definované sadě menšího počtu příznaků, druhá k vysoko-dimenzionální sadě heterogenních prozodických příznaků. První část práce se věnuje vývoji příznaků reprezentujících prozodické kontury, zde jsme vyvinuli a ověřili několik modelovacích technik, s důrazem na modelování v reprezentativních podprostorech. Druhá část práce se zaměřuje na nové pod-prostorové modelovací techniky pro heterogenní prozodické parametry s velkou dimenzionalitou. Model je teoreticky odvozen a experimentálně ověřen na oficiálních datech z NIST evaluací ověřování mluvčího (NIST Speaker Recognition Evaluation). Ve srovnání s ostatními současnými prozodickými jsme dosáhli podstatně lepších výsledků. Na konci práce presentujeme také novou techniku pro elegantní kombinaci dvou prozodických systémů. Tato technika může být použita rovněž pro fúzi prozodického systému se standardním přesným cepstrálním systémem, což vede k dalšímu podstatnému zvýšení úspěšnosti verifikace.  

Analysis and Testing of Concurrent Programs
Letko, Zdeněk ; Lourenco, Joao (referee) ; Sekanina, Lukáš (referee) ; Vojnar, Tomáš (advisor)
V disertační práci je nejprve uvedena taxonomie chyb v souběžném zpracování dat a přehled technik pro jejich dynamickou detekci. Následně jsou navrženy nové metriky pro měření synchronizace a souběžného chování programů společně s metodologií jejich odvozování. Tyto techniky se zejména uplatní v testování využívajícím techniky prohledávání prostoru a v saturačním testování. Práce dále představuje novou heuristiku vkládání šumu, jejímž cílem je maximalizace proložení instrukcí pozorovaných během testování. Tato heuristika je porovnána s již existujícími heuristikami na několika testech. Výsledky ukazují, že nová heuristika překonává ty existující v určitých případech. Nakonec práce představuje inovativní aplikaci stochastických optimalizačních algoritmů v procesu testování vícevláknových aplikací. Principem metody je hledání vhodných kombinací parametrů testů a metod vkládání šumu. Tato metoda byla prototypově implementována a otestována na množině testovacích příkladů. Výsledky ukazují, že metoda má potenciál vyznamně vylepšit testování vícevláknových programů. 

Relational Verification of Programs with Integer Data
Konečný, Filip ; Bouajjani, Ahmed (referee) ; Jančar, Petr (referee) ; Vojnar, Tomáš (advisor)
Tato práce představuje nové metody pro verifikaci programů pracujících s neomezenými celočíslenými proměnnými, konkrétně metody pro analýzu dosažitelnosti a~konečnosti. Většina těchto metod je založena na akceleračních technikách, které počítají tranzitivní uzávěry cyklů programu. V práci je nejprve představen algoritmus pro akceleraci několika tříd celočíselných relací. Tento algoritmus je až o čtyři řády rychlejší než existující techniky. Z teoretického hlediska práce dokazuje, že uvažované třídy relací jsou periodické a~poskytuje tudíž jednotné řešení prolému akcelerace. Práce dále představuje semi-algoritmus pro analýzu dosažitelnosti celočíselných programů, který sleduje relace mezi proměnnými programu a~aplikuje akcelerační techniky za účelem modulárního výpočtu souhrnů procedur. Dále je v práci navržen alternativní algoritmus pro analýzu dosažitelnosti, který integruje predikátovou abstrakci s accelerací s cílem zvýšit pravděpodobnost konvergence výpočtu. Provedené experimenty ukazují, že oba algoritmy lze úspěšně aplikovat k verifikaci programů, na kterých předchozí metody selhávaly. Práce se rovněž zabývá problémem konečnosti běhu programů a~dokazuje, že tento problém je rozhodnutelný pro několik tříd celočíselných relací. Pro některé z těchto tříd relací je v práci navržen algoritmus, který v polynomiálním čase vypočítá množinu všech konfigurací programu, z nichž existuje nekonečný běh. Tento algoritmus je integrován do metody, která analyzuje konečnost běhů celočíselných programů. Efektivnost této metody je demonstrována na několika netriviálních celočíselných programech.