|
Influence of meadow management on the migration behavior of selected species of butterflies
Bubová, Terezie ; Langrová, Iva (advisor) ; Farkač, Jan (referee)
Migrations are the key process and one of the basic biological features, which allow survival of endangered species in fragmented landscape. In the last decades, agriculture intensification, industry and urbanization caused that number of natural butterfly habitats has significantly decreased. The localities originally suitable for butterflies are currnetly converted to farmland or building plots. This PhD thesis aimed to find a compromise solution of meadow management, which should allow a commercial use and concurrently do not jeopardize the continued existence of endangered or threatened species. The main idea of this study was in the intentional emigration causing in the middle of flight period, which should lead into resettlement of the population to another (potentially more suitable) locality. Possibility of aimed manipulation with butterfly emigrations would be considered as a major breakthrough in their protection.
The investigated species Phengaris nausithous (Bergsträsser, 1779) and Phengaris teleius (Bergsträsser, 1779) are both considered to be flagship species for protection of European butterflies at open meadows. This study is based on research, which was carried out in 2013-2015 at 17 patch in localities Dolní Labe, Czech Republic. In above mentioned years, one selected meadow was mowed in the middle of flight season and the emigrations were then monitored using mark-release-recapture method. Results of population and migration characteristics were calculated in MARK 8.1 software. Subsequently, the effect of mowing on emigration (comparison of emigrations from the meadow before and after mowing) was evaluated using Statistica 13.
The hypotheses of this study were based on the assumption, that the loss of resources after well-timed mowing should increase the activity of adult butterflies. During the monitoring, number of emigrations was increased only in flight season 2015. Unfortunately, the statistical evaluation did not show significant effect of mowing on migrations. On the other hand, the hypothesis dealing with colonization of nearest meadows was confirmed.
Effect of intentional emigration caused by management interventions was unfortunately not proved. However, we found out, that even though the population at one mowed meadow decreased clearly, the metapopulation size at the locality remained more or less stable.
At investigated (mowed) meadow, there was observed a sharp decline of P. nausithous abundance. On the other hand, P. teleius population was only slightly reduced. It is therefore conceivable, that P. teleius are not as susceptible to innapropriate term of mowing. The results obtained in our research conclusively displayed no possible positive effect of mowing in the middle of flight season and a necessity of suitable management maintenance at localities inhabited by Phengaris butterflies.
|
|
Total contents and speciation of arsenic and selenium in plants growing in soils with different physico-chemical properties
Tremlová, Jana ; Száková, Jiřina (advisor) ; Vymazal, Jan (referee)
This dissertation thesis deals with uptake, accumulation and transformation of arsenic and selenium in plants growing on soils with different chemico-physical soil properties. The contents of arsenic were investigated in 99 wild plant species, coming from 27 different families and 6 different vegetables growing in arsenic contaminated soils. The results suggest that there are species-specific mechanisms which protects certain plants from the excessive uptake of arsenic from the soil. On the other hand, there are plants using a strategy of accumulation, which theoretically may increase the risk of arsenic entry into the food chain, whether through grazing cattle and wildlife or through consumption of vegetables growing on arsenic contaminated soils. The most prevalent arsenic compounds are AsV and AsIII. Other arsenic compounds occure as minor species. An important finding was detection of arsenobetaine in Plantago lanceolata L. and Carex praecox Schreb ..
The contents of selenium were examined in 73 species of wild plants, coming from 29 different families. The results suggest that naturally low levels of selenium in the soil of selected locations along with a low capability of selenium uptake via collected plant species lead to the low content of selenium in plant biomass which may contribute to selenium deficient throughout the food chain. Foliar application of selenate on wild plant communities and on some types of vegetables in our case Brassica oleracea var. italica can have a positive impact on increasing the selenium content in the aboveground biomass of these plants and by extension, increase the selenium content in the human diet. Dominant selenium compounds in the aboveground biomass of the analyzed plants were SeVI and selenomethionine, with variable proportion of other commonly occurring organic selenium compounds, which is mainly affected by plant species.
|
|
Subsidy Support of the Sustainable Waste Management
BEDNÁŘOVÁ, Renata
The subject of the dissertation is the issue of the waste management with special emphasis on the recycling of the construction and demolition waste. The recourse is an analysis of the key instruments regulating the activities and behaviour of market operators in this field toward fulfilling all-society priorities and principles of the sustainable development, where special accent is put on the area of subsidy policies and programmes. The aim of the dissertation is to analyse and evaluate the setting of the selected subsidy programme in terms of economic and ecological efficiency with the emphasis on the assessment of the impact on the recipient. The subject of the research will be a priority axis 4 "Improvement of Waste Management and Removal of Old Environmental Burdens" within the Operational Programme Environment 2007 - 2013. In the literature review basic concepts and important definitions are defined, followed by the comprehensive and complex searches of the problematics from different angles of view. First of all, the global aspect of environmental protection is discussed, broader historical, legal, economic and political contexts, that are essential fundament for understanding the current and future challenges both globally regionally, are summarized. Hereafter, a more detailed description of the situation of the European Union is followed, then the overview is completed by a detailed view at the state of the problematics in the Czech Republic. Subsequent chapters are devoted to a detailed analysis of the waste management sector, again in terms of global, European and national standpoint, in the end the view is focused on the key issue of the dissertation problematics of construction and demolition waste. In the application part the fulfilling of the stated objective of the dissertation through four defined hypothesis is solved. Hypotheses verify the efficiency and appropriateness of the setting of the system of subsidies in the frame of the monitored programme. The emphasis is imposed on the assessment of the impact of the allocated subsidies to the private entities on their economic and environmental efficiency.
|
|
Diamond coated AlGaN/GaN high electron mobility transistors - effect of deposition process on gate electrode
Vanko, G. ; Ižák, Tibor ; Babchenko, O. ; Kromka, Alexander
We studied the influence of the diamond deposition on the degradation of Schottky gate electrodes (i.e. Ir or IrO2) and on the electrical characteristics of AlGaN/GaN high electron mobility transistors (HEMTs). In present study, the diamond films were selectively deposited on the AlGaN/GaN circular HEMT by focused (ellispoidal cavity reactor) and linear antenna (surface wave) microwave plasma at different temperatures from 400°C to 1100°C. The preliminary results on electrical measurements on the diamond-coated c-HEMTs showed degraded electrical properties comparing to c-HEMTs before deposition process, which was attributed to degradation of the Ir gate electrodes even at temperatures as low as 400°C. On the other hand, metal oxide gate electrode layer (IrO2) can withstand diamond CVD process even at high temperatures (~900°C) which make it suitable for fabrication of all-in-diamond c-HEMT devices for high-power applications.
|
|
Packet Classification Algorithms
Puš, Viktor ; Lhotka,, Ladislav (referee) ; Dvořák, Václav (advisor)
Tato práce se zabývá klasifikací paketů v počítačových sítích. Klasifikace paketů je klíčovou úlohou mnoha síťových zařízení, především paketových filtrů - firewallů. Práce se tedy týká oblasti počítačové bezpečnosti. Práce je zaměřena na vysokorychlostní sítě s přenosovou rychlostí 100 Gb/s a více. V těchto případech nelze použít pro klasifikaci obecné procesory, které svým výkonem zdaleka nevyhovují požadavkům na rychlost. Proto se využívají specializované technické prostředky, především obvody ASIC a FPGA. Neméně důležitý je také samotný algoritmus klasifikace. Existuje mnoho algoritmů klasifikace paketů předpokládajících hardwarovou implementaci, přesto však tyto přístupy nejsou připraveny pro velmi rychlé sítě. Dizertační práce se proto zabývá návrhem nových algoritmů klasifikace paketů se zaměřením na vysokorychlostní implementaci ve specializovaném hardware. Je navržen algoritmus, který dělí problém klasifikace na jednodušší podproblémy. Prvním krokem je operace vyhledání nejdelšího shodného prefixu, používaná také při směrování paketů v IP sítích. Tato práce předpokládá využití některého existujícího přístupu, neboť již byly prezentovány algoritmy s dostatečnou rychlostí. Následujícím krokem je mapování nalezených prefixů na číslo pravidla. V této části práce přináší vylepšení využitím na míru vytvořené hashovací funkce. Díky použití hashovací funkce lze mapování provést v konstantním čase a využít při tom pouze jednu paměť s úzkým datovým rozhraním. Rychlost tohoto algoritmu lze určit analyticky a nezávisí na počtu pravidel ani na charakteru síťového provozu. S využitím dostupných součástek lze dosáhnout propustnosti 266 milionů paketů za sekundu. Následující tři algoritmy uvedené v této práci snižují paměťové nároky prvního algoritmu, aniž by ovlivňovaly rychlost. Druhý algoritmus snižuje velikost paměti o 11 % až 96 % v závislosti na sadě pravidel. Nevýhodu nízké stability odstraňuje třetí algoritmus, který v porovnání s prvním zmenšuje paměťové nároky o 31 % až 84 %. Čtvrtý algoritmus kombinuje třetí algoritmus se starším přístupem a díky využití několika technik zmenšuje paměťové nároky o 73 % až 99 %.
|
|
Acceleration of Object Detection Using Classifiers
Juránek, Roman ; Kälviäinen, Heikki (referee) ; Sojka, Eduard (referee) ; Zemčík, Pavel (advisor)
Detekce objektů v počítačovém vidění je složítá úloha. Velmi populární a rozšířená metoda pro detekci je využití statistických klasifikátorů a skenovacích oken. Pro učení kalsifikátorů se často používá algoritmus AdaBoost (nebo jeho modifikace), protože dosahuje vysoké úspěšnosti detekce, nízkého počtu chybných detekcí a je vhodný pro detekci v reálném čase. Implementaci detekce objektů je možné provést různými způsoby a lze využít vlastnosti konkrétní architektury, pro urychlení detekce. Pro akceleraci je možné využít grafické procesory, vícejádrové architektury, SIMD instrukce, nebo programovatelný hardware. Tato práce představuje metodu optimalizace, která vylepšuje výkon detekce objektů s ohledem na cenovou funkci zadanou uživatelem. Metoda rozděluje předem natrénovaný klasifikátor do několika různých implementací, tak aby celková cena klasifikace byla minimalizována. Metoda je verifikována na základním experimentu, kdy je klasifikátor rozdělen do předzpracovací jednotku v FPGA a do jednotky ve standardním PC.
|
|
Network Architecture and Interconnection of Embedded Systems
Trchalík, Roman ; Drábek, Vladimír (referee) ; Srovnal, Vilém (referee) ; Švéda, Miroslav (advisor)
The thesis focuses on the architecture of embedded systems. It summarizes the current state of accepted standards from IEEE 1451 family, which deals with creating an environment for the sensors and their involvement in various networks. These standards describe the open, network-independent communication architecture for a sensor-based system. One of the main outcomes of this work is the architectures presented as case studies, which can be used as design patters for embedded applications. They are demonstrated on ZigBee technology suitable mainly for small devices with very low power consumption. Based on these studies the new design of universal gateway was proposed. Its major advantage is that it allows interconnection of the endpoints based on different sensor network technologies. Additionally, the thesis deals with modifying the routing protocol of ZigBee network in order to reduce power consumption required to transmit one data packet.
|
|
Optimization of network flow monitoring
Žádník, Martin ; Lhotka,, Ladislav (referee) ; Matoušek, Radomil (referee) ; Sekanina, Lukáš (advisor)
The thesis deals with optimization of network flow monitoring. Flow-based network traffic processing, that is, processing packets based on some state information associated to the flows which the packets belong to, is a key enabler for a variety of network services and applications. The number of simultaneous flows increases with the growing number of new services and applications. It has become a challenge to keep a state per each flow in a network device processing high speed traffic. A flow table, a structure with flow states, must be stored in a memory hierarchy. The memory closest to the processing is known as a flow cache. Flow cache management plays an important role in terms of its effective utilization, which affects the performance of the whole system. This thesis focuses on an automated design of cache replacement policy optimized to a deployment on particular networks. A genetic algorithm is proposed to automate this process. The genetic algorithm generates and evaluates evolved replacement policies by a simulation on obtained traffic traces. The proposed algorithm is evaluated by designing replacement policies for two variations of the cache management problem. The first variation is an evolution of the replacement policy with an overall low number of state evictions from the flow cache. The second variation represents an evolution of the replacement policy with a low number of evictions belonging to large flows only. Optimized replacement policies for both variations are found while experimenting with various encoding of the replacement policy and genetic operators. The newly evolved replacement policies achieve better results than other tested policies. The evolved replacement policy lowers the overall amount of evictions by ten percent in comparison with the best compared policy. The evolved replacement policy focusing on large flows lowers the amount of their evictions two times. Moreover, no eviction occurs for most of the large flows (over 90%). The evolved replacement policy offers better resilience against flooding the flow cache with large amount of short flows which are typical side effects of scanning or distributed denial of service activities. An extension of the replacement policy is also proposed. The extension complements the replacement policy with an additional information extracted from packet headers. The results show further decrease in the number of evictions when the extension is used.
|
|
Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.
|
|
Mechanochemical Preparation of Alumina-Ceria
Jirátová, Květa ; Spojakina, A. ; Tyuliev, G. ; Balabánová, Jana ; Kaluža, Luděk ; Palcheva, R.
Ceria containing catalysts play an essential role in heterogeneous catalytic processes. However, ceria shows poor thermal stability and low specific surface area and therefore, many studies have been done to improve its properties by combination with other oxides. Alumina-ceria is substantial component of the three ways catalysts, due to the ceria ability to function as the buffer of oxygen and to enhance the oxygen storage capacity of the catalysts. Ceria in these catalysts also functions as structural promoting component, increasing alumina stability towards thermal sintering. Promising method of oxides preparation, very interesting and simple but not sufficiently studied yet is a mechanochemical synthesis. Here we report on the synthesis of nano-sized alumina, ceria and ceria-alumina of various compositions by a wet solid phase mechanochemical reaction of hydrous aluminum, and/or cerium nitrate with ammonium bicarbonate after addition of a small amount of water. The aim of this contribution is to study processes being in progress during synthesis of the mixed oxides, interaction between components and their mutual effect on the properties of resulting products. The phase evolution during mechanical milling and the subsequent heat treatment of precursors were studied by X-ray diffraction, DTA/TG, H2-TPR, NH3-TPD, CO2-TPD, N2 adsorption at -195°C, IR, and XPS spectroscopy. Alumina and mixtures of alumina with different quantities of CeO2 (1- 18 wt. %) were synthesized by mechanochemical method from aluminum nitrate, cerium nitrate and ammonia bicarbonate.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22015083108560 - PDF
|
guest ::
