|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Antioxidant, anti-proliferative and immunomodulatory effect of fruits, vegetables and mushrooms in vitro
Doskočil, Ivo ; Havlík, Jaroslav (advisor) ; Orsák, Matyáš (referee)
Recently there has been an increasing interest in discovering of new species of plants and mushrooms which have antioxidant or anti proliferative activity. The interest is caused by the fact that these species have medicinal and food utilization. These properties of plants and mushrooms can be used when dealing with many diseases which may be connected with oxidative stress (inflammatory bowel disease, cardiovascular disease, hypertension, and tumour disease, etc.).
The thesis propounds characteristics of in vitro antioxidant and anti proliferative activity of 19 types of juices and 28 methanol extracts of fruits and vegetables, which are common parts of a diet. In the thesis there are also characteristics of 13 ethanol extracts of edible mushrooms of the order of Polypore (Popyporales). Antioxidant activity was quantifie by 2, 2 diphenyl 1 picrylhydrazyl (DPPH), oxygen radical absorbance capacity (ORAC), and inhibition of nitric oxide (NO) production. Cytotoxicity was measured by MTT (3 (4,5 dimethylthiazol 2 yl) 2,5 diphenyltetrazolium bromide. Immunomodulatory activity was determined by an assay of phagocytic activity of human neutrophil granulocytes. Further a total phenolic content (TPC) and total beta glucan content were investigated; these are considered to be the potentially active constituents participating in mentioned activities.
From the obtained results it is evident that juices (TPC = 1603.2 mg GAE/L; ORAC = 438.5 umol TE/g)
and a bilberry (Vaccinium myrtillus) fruit extract (ORAC 836.6 umol TE/g; DPPH = 404.6 umol TE/g) showed
the highest antioxidant activity of all tested samples of fruits and vegetables. Capsicum (Capsicum L.)
juices (TPC = 642.1 mg GAE/L; ORAC = 127.9 umol TE/g) and a radish (Raphanus sativus L.) extract
(ORAC 724.5 umol TE/g; DPPH = 52.2 umol TE/g) also proved to have the high values of antioxidant activity. From the tested fruits and vegetables the following inhibited to produce a nitric oxide: onion (Allium cepa L) juices (lowered the NO production by 57%), tangerine juices (Citrus reticulata Blanco)(by 52%), broccoli (Brassica oleracea var. botrytis italic) extract (by 21%), and orange (Citrus sinensis Pers.) extract (by 10%). Concerning edible
mushrooms, Lentinus tigrinus (Bull.) Fr. (TPC = 216.2 umol GAE/g of extract), Ganoderma lucidum (Curtis) P. Kras (TPC = 257.9 umol GAE/g of extract), and Royoporus badius (Pers.) A.B. De (TPC = 257.8 umol GAE/g of extract) presented the highest phenolic content. Sparassis crispa (Wulfen) Fr. (117.4 mg/g of extract) had the highest content of beta glucan. Substantial effect on phagocytic activity of granulocytes was noticed in connection with Neolentinus lepideus (Fr.) Redhead & Ginns, Polyporus squamosus (Huds.) Fr., and S. crispa. In connection with the latter of mentioned mushrooms, a moderate inhibitory effect towards HT 29 human colorectal adenocarcinoma cell line
(IC50 = 107 ug/ml of extract) was noticed.
The results indicate that the tested plants and mushrooms can be beneficial when reducing the negative effects of oxidative stress. The oxidative stress has been recognized as a contributing factor to a whole range of diseases and the reduction of the oxidative stress may lead to the decrease in the possibility of the diseases´ progression. The results show the possible favourable effects on the human health. When evaluating the results, the following fact should be taken into consideration; the in vitro tests and screenings are considered to be the first phase of systematic research of the effects and serve for the choice of respondents for further detailed studies.
|
|
Photocatalytic Decomposition of Wastewater from the Production of Explosives
Brom, Petr ; Brožek, Vlastimil ; Březina, Václav ; Hlína, Michal ; Mastný, L. ; Novák, M.
Water stabilized plasma generator WSP® H-500, operating on the principle of Gerdien arc was used for the photocatalytic decomposition of furazan- and picraminate-based explosives. The generator emits intensive radiation in the range of 300-660 nm, which allows not only to activate photocatalysts based on TiO2, but also other semiconductor oxides with a narrower band gap, such as tungsten oxide. The photocatalytic decomposition of sewage and slurries containing the potassium salt of 4-hydroxy-4,6-dihydro-5,7- dinitrobenzofurazane-3-oxide (KDNBF) or sodium picraminate (NaC6H4N3O5) was performed using the anatase paste and newly developed photocatalyst produced by the company Precheza a.s. The photocatalytic reactor was built using a quartz tube coil with an internal volume of 650 ml, with a nominal size of the irradiated area of 7.5 dm2 (value reduced by the area of the gaps between coil turns) to enable the flow the processing solution or suspension of up to 10 l / min. The centre of the coil is exposed to the plasma jet with the intensity\nof 80 kW; of which 15 kW is transformed into the light radiation. 11% of the radiation output was used for the presented experiments. The time of exposition was 45 mins and 20 l of solution were treated. In the case of KDNBF, 90% of the compound was decomposed. Moreover, 100% of sodium picraminate were decomposed after 15 minutes into low-molecular inorganic compounds. Advantage of the assembly is the ability to treat highly dangerous chemical compounds in a closed cycle and test selective catalyst
|
|
Optical low dispersion rezonator as length sensor using optical frequency comb
Pravdová, Lenka ; Hucl, Václav ; Lešundák, Adam ; Lazar, Josef ; Číp, Ondřej
Ultra-high precis measurements are domain of lasers interferometers. An optical resonator measuring method using broad spectrum of radiation of an optical frequency comb was designed and experimentally verified at our workplace. The measuring of a quantity – a distance of resonator mirrors – is provided by its conversion to the value of repetition frequency of the pulse laser with mode-locked optical frequency comb. In this paper the comparison of the absolute scale of the optical resonator with an incremental interferometer scale is introduced. The incremental interferometer is implemented for verification of the optical resonator scale. The double beam incremental interferometer is operating at the wavelength of 633 nm and the measuring mirror with piezo actuator is used as one of its reflectors. It turns out that the major error signal is the reflection of the periodic nonlinearity of the incremental resonator scale. The relative resolution of our method reaches values up to 10-9 while maintaining measuring scale.
|
| |
|
Appraisal and assessment of development options immovable manufacturing facility open market value
Hanzlovská, Nikola ; Gardášová, Alena (referee) ; Hlavinková, Vítězslava (advisor)
The main objective of this diploma thesis is to determine the usual price for a manufacturing facility, by using valuation methods. A secondary aim was to determine best possible use of the building and the development possibilities, according to the results from valuation. Diploma thesis is divided to theoretical and practical part. In theoretical part are detailed valuation methods divided to two main parts, the valuation by price regulation and the market valuation. In the beginning the pratical part describes the location and property. Furthermore I applied valuation method for manufacturing complex. At the conclusion is recapitulation and analysis of results, where are considered diferences and the usual price is set. The last chapter is devoted to the best use of complex and consideration of development possibilities.
|
|
Comparing the Price of a Transportation Structure and the Actual Costs Incurred in Various Stages of Construction
Nezbeda, Jiří ; Zímová, Štěpánka (referee) ; Kosová, Jaroslava (advisor)
This diploma thesis deals with the calculation of the cost of the building work in order to create the price, which at the stage of the contract becomes a selling price, and the costs are fixed as a budget. The subject of this work is to monitor the development of costs in time so that the cost does not exceed the budget and the construction did not get into the negative result. Then set the price by its own methods (item budget, calculation according to budget indicators) and compare the prices and costs thus obtained from different phases of construction between each other and determine the differences. In this work is monitored and compared the cost of a construction contract and its costs in the construction stages. In the practical part,is used the method of direct comparison of cost and price values over time, in the form of different outputs from the controlling program and outputs from compiled item budget and the calculation of the construction. Analyzing the differences between these costs and their evolution over time by more detailed examination of item budgets and cost calculations, they determine the origin of these deviations. In conclusion, is proposed measures for a particular transport structure whitch was handled by the author as"master and co-ordinator of the construction".
|
|
Comparison of single-family house prices in Nový Jičín and its surroundings in 2015 and 2016
Žemlová, Eva ; Gardášová, Alena (referee) ; Lorencová, Marie (advisor)
The thesis deals comparison of house prices in Nový Jičín and its surroundings in 2015 and 2016. This family house is located in the village Starý Jičín and then for comparison will be moved to the center of Nový Jičín. In given locations we have to determined observed price and market value. In theoretical part is explained basic terminology, the main legislation which was used and methods of valuation of immovable property. The result of this work is getting to know the influences of locations of family house and it´s price. and identify factors that influence these prices.
|
|
Analysis and Testing of Concurrent Programs
Letko, Zdeněk ; Lourenco, Joao (referee) ; Sekanina, Lukáš (referee) ; Vojnar, Tomáš (advisor)
V disertační práci je nejprve uvedena taxonomie chyb v souběžném zpracování dat a přehled technik pro jejich dynamickou detekci. Následně jsou navrženy nové metriky pro měření synchronizace a souběžného chování programů společně s metodologií jejich odvozování. Tyto techniky se zejména uplatní v testování využívajícím techniky prohledávání prostoru a v saturačním testování. Práce dále představuje novou heuristiku vkládání šumu, jejímž cílem je maximalizace proložení instrukcí pozorovaných během testování. Tato heuristika je porovnána s již existujícími heuristikami na několika testech. Výsledky ukazují, že nová heuristika překonává ty existující v určitých případech. Nakonec práce představuje inovativní aplikaci stochastických optimalizačních algoritmů v procesu testování vícevláknových aplikací. Principem metody je hledání vhodných kombinací parametrů testů a metod vkládání šumu. Tato metoda byla prototypově implementována a otestována na množině testovacích příkladů. Výsledky ukazují, že metoda má potenciál vyznamně vylepšit testování vícevláknových programů.
|
|
Trust and Reputation in Distributed Systems
Samek, Jan ; Návrat,, Pavol (referee) ; Šafařík,, Jiří (referee) ; Hanáček, Petr (advisor)
This Ph.D. thesis deals with trust modelling for distributed systems especially to multi-context trust modelling for multi-agent distributed systems. There exists many trust and reputation models but most of them do not dealt with the multi-context property of trust or reputation. Therefore, the main focus of this thesis is on analysis of multi-context trust based models and provides main assumptions for new fully multi-contextual trust model on the bases of them. The main part of this thesis is in providing new formal multi-context trust model which are able to build, update and maintain trust value for different aspects (contexts) of the single entity in the multi-agent system. In our proposal, trust value can be built on the bases of direct interactions or on the bases on recommendations and reputation. Moreover we assume that some context of one agent is not fully independent and on the bases of trust about one of them we are able to infer trust to another's. Main contribution of this new model is increasing the efficiency in agent decision making in terms of optimal partner selection for interactions. Proposed model was verified by implementing prototype of multi-agent system when trust was used for agents' decision making and acting.
|
guest ::
