|
|
Apartment Building in Kyjov
Jurutková, Zuzana ; Závorková, Kateřina (referee) ; Králová, Zuzana (advisor)
This master´s thesis solves the apartment building with – bakeshop. The are five floors in the apartment building. The building hasn´t any basement. There are fifteen flats in the building and one flat is barrier-free. The apartment building is designed in passive standard, it´s caused by the orientation to cardinal points, compact shape, extreme thicknesses of insulations, orientation of windows to the south-west and to the south-east, but also thanks to the climatic area.
|
|
|
Building for housing
Pešava, Petr ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
The subject of the bachelor thesis is the processing of project documentation for the construction of a residential building in Dolní Břežany. It is a detached building with four above-ground floors and one underground floor. In the basement there are cellars, technical facilities and other common areas. There are a total of twenty housing units in the above-ground floors. The building is designed as a masonry system with cast-in-place reinforced concrete floor. Underground external loadbearing wall are made of concrete permanent formwork. The above-ground structures are made of clay masonry. The foundation of the building is carried out by means of foundation strips. The roof of the building is covered with a warm flat roof.
|
|
|
Apartment building
Veselý, Karel ; Průša, David (referee) ; Brukner, Bohuslav (advisor)
The subject of this Bachelor thesis is a project documentation for construction of the building of the apartment house in Humpolec. The building is designed for housing, it has five overground storeys and a basement, with a lift. It contains seventeen dwelling units with access to the balcony and a possibility of own parking right in the building. The basement is largely made up of parking space – one collective garage with nineteen parking spots. The remaining part of the underground floor is made up of corridor, air conditioning engine room, room with electricity meters, room with cellars, utility room and cleaning room. On the other floors there are a total of seventeen housing units with layouts of 1+kk, 2+kk, 3+kk a 4+kk. The apartment building is based on reinforced concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks, in the basement from monolithic reinforced concrete are insulated with the contact thermal insulation system according to ETICS. The ceiling structures are monolithic reinforced concrete slabs, only above the apartment on the 5th floor, the load-bearing part of the ceiling is solved using wooden beams. Stairway is solved as reinforced concrete precast. The building is covered by flat monolayer roof.
|
|
|
Apartment building
Jílková, Nikola ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis deals with processing of documentation at the level of the implementation of a construction of an apartment building, which is located in Polička, in the district of Svitavy. The building is situated on a flat parcel in the housing estate Hegerova. The apartment building has a partial basement with four floors. There are 14 dwelling units in the building. On the first floor, there is one accessible flat with entrance from a separate garage stand with a layout of 2+kitchenette, one flat with a layout of 3+kitchenette, common areas of the house, such as a bicycle room and cleaning room. On the second floor, there are two flats with a layout of 2+kitchenette with balcony and two flats with a layout of 1+kitchenette designed. There is the same housing layout on the third and fourth floor. There are cubicles for each flat, utility room and common carriage house in the partial basement. Parking for residents is designed to be on the parcel in front of the building. The building is designed in a two-way masonry construction system. There is a communication space that includes stairs and an elevator located in the middle of the building. Basement perimeter walls are made of waterproof concrete and the rest is lined with ceramic blocks. The part of the building with the basement underneath is based on a so-called „water tank“. Non-basement part is based on a strip foundation and finished with a flat green roof. Ceilings and staircase are made of cast-in-place reinforced concrete. The building is insulated with a contact thermal insulation system ETICS.
|
|
|
The apartment house in Tišnov
Egerová, Tereza ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Tišnově. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 37 m. The building has 4 floors and a flat roof. The building is made of ceramic bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 12 apartments, one of which is completely wheelchair. There are also 6 separate garages on the first floor.
|
|
|
Police district department of the Czech Republic, Brno-Černovice
Vaníček, Marek ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.
|
|
|
Apartment building
Knotek, Michal ; Bílková, Andrea (referee) ; Čuprová, Danuše (advisor)
The aim of this bachelor thesis is processing of the design documentation for the construction of an apartment building. This apartment building is located in Zlín in the local part Prštné. In the building there are three above-ground floor with a partial basement. Structural system is transversal wall. The foundation construction is designed on the foundation strips. The vertical load-bearing structures are designed cast-in-place reinforced concrete with fix into the loadbearing transversal walls. The roof is flat with washed river aggregates loading layer. The floor constructions are designed heavy, floating. The thermal insulation of the facade is designed of graphite expanded polystyrene in an ETICS certified system.
|
|
|
Winery ŠakWine
Franko, Michal ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The aim of this diploma thesis is to elaborate the project documentation of a new-built winery, in the cadastre area of Šakvice. The building has a basement and one above-ground floor. The building has a combined structural system. On the first floor is a wine-tasting room, a conference hall, a wine shop, a showroom, and an office. The wine production and technical facilities are situated in the basement. The building is based on cast-in-place plain concrete foundation strips. Vertical loadbearing structures on the first floor are design from ceramic blocks and the vertical loadbearing structures on the basement are design from cast-in-place reinforced concrete. Horizontal loadbearing structures are designed from cast-in-place reinforced concrete. The flat roof consists of a flat roof with extensive greenery. There are twenty parking spaces on the site. The designs were developed in the AutoCAD software. All structures comply with the valid standards and regulations.
|
|
|
CONSTRUCTIONAL AND TECHNOLOGICAL PROJECT OF RECONSTRUCTION OF BUILDING ROOSEVELTOVA IN BRNO
Pavelka, Petr ; Nečasová, Barbora (referee) ; Novotný, Michal (advisor)
This diploma thesis deals with the constructional and technological project of reconstruction of building Rooseveltova in Brno. The basis for this work was the design documentation for the realization of this project. The technical reports provides all the basic information about the construction to this project. Demolition works and implementation of cast-in-place reinforced concrete floor are detailed processing in the technological regulations. Control and test plans, time and financial plans, drawings of building equipment, draft of machinery and plans of health and safety and fire prevention are also component of this project. Another annex of this thesis is budget and selected assembly details.
|
|
|
The apartment house in Horní Loučky
Šmídková, Michaela ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Horni Loucky. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 16,75 m. The building has 4 floors and a flat roof. The building is made of sand-lime bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 5 apartments, one of which is completely wheelchair and one workshop (eg hairdressing). At the building will be constructed parking area for the residents of the apartment building and premises.
|
guest ::
