National Repository of Grey Literature 403 records found  beginprevious21 - 30nextend  jump to record: Search took 0.02 seconds. 
The Multifunctional building Hlinky
Jarmerová, Eliška ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor) ; Sedláková, Markéta (advisor)
This bachelor thesis presents a design of a multifunctional buiding in Brno – Pisárky. The building should be located in a gap site in the street Hlinky. The plot is situated at the foothill of Žlutý kopec near the premises of Brno Exhibition Centre. The southern part of the plot includes the area of terraced houses. The street is 215m above sea level. This project designs a completion of the street housing development with a fitting construction of a convenient size and type of façade. The project takes into account a non-existing and formerly pulled-down 19th-century object of value concerned by heritage conservation. The former building was significant for its indentation in the line of the adjacent buildings. In the design I try to point out at this element applied for the whole height of the building. The building facade division follows the elements applied for the other objects in the surroundings of the lot. Based on the former analysis, the design utilizes a high potential of the place which had not been met before, mainly its easy centre and transport accessibility, south-facing slope, high density of population in the area of the exhibition centre as well as as university hostels. This multifunctional building is designed to function in three ways – as an office, a living place and a shop with a buffet providing cooked meals. The design preserves and recultivates a garden which will function as an orchard with furniture. The first floor of the object is designed as a reinforced concrete frame which is filled with a wall of cut vertically perforated brick blocks with mineral wool insulation and completed with ventilated façade made of facing bricks. The building has six aboveground floors and one underground floor. The height of the designed building overtops the neighbouring buildings, which is hidden due to the division of the building facade into smaller areas whose function is to achieve better setting of the mass of the building into the frontage.
Shooting range & lasergame arena "Eagle Eye"
Javůrek, Martin ; Burianová, Lenka (referee) ; Remeš, Josef (advisor)
The subject of this project is a new building of a shooting range and lasergame arena in Brno, district Královo pole. The aim of the thesis is to create a documentation for realization of a shooting range and lasergame arena. It is a stand-alone two-storey building without the basement. The building is based on piled foundations, the construction system is reinforced concrete frame, infill material is light concrete brick. There is an exception: in the tunnel shooting range, there are monolithic reinforced concrete walls. The ceilings above the first floor are made also of reinforced concrete, the ceiling above the second floor / roof is made of pre-stressed reinforced concrete roof panels of spiroll type. There is flat, single-layer roof. The walls are designed as double-layered, contact-insulated with fiber-cement cladding.
Detached house with private office
Wilkonský, Roman ; Vašíček, Vladimír (referee) ; Kacálek, Petr (advisor)
A design of a detached house with private office is solved in this bachelor's thesis. The building itself has a rather rectangular main floor plan. A design of a flat one-layered casing roof is solved on this building. In the building itself, there is one workshop and one housing unit.
Boarding House
Karásek, Adam ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This diploma thesis solves a project documentation of boarding house and contains appurtenances according to valid regulations. The house is as a detached house, without basement. It has rectangular size and is covered with a flat one coat roof and saddle roof with truss girders. The house has three floors with terrace. On the second and third floor is 14 guest rooms with social rooms. On the first floor is: pram room, bicycle/ski room, reception, utility rooms, wellness, restaurant, kitchen. In the house is designed a elevator. The house is brick with a contact thermal insulation system. Ceiling constructions are from prestressed panels. The house is designed on sloping terrain from south to north.
Apartment building in Lanškroun
Rousková, Radka ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This bachelor thesis concerns the design documentation for the construction of an apartment building in Lanškroun. The aim of the thesis is work out a layout of the building and design a suitable construction system. Design documentation complies with valid standards and regulations. The program AutoCAD was used for processing. The proposed building has three storeys and a partial basement. The apartment building has 8 flats and one of them is designed for a barrier-free. The vertical refit works above ground are designed as clay masonry, masonry consists of permanent formwork in the basement. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The apartment building is covered warm flat roof. The building is based on foundation strips.
Family house in Rokytnice nad Rokytnou
Blažek, Martin ; Kervitcer, Marek (referee) ; Sobotka, Jindřich (advisor)
This bachelor thesis solves the design of a family house in Rokytnice nad Rokytnou in the district of Třebíč. The family house is designed as a two-story building with a basement, warm flat roof and a garage for two cars. The design respects the nature of the surrounding area and makes full use of the site. Designed for 4 to 6 people. The perimeter walls in the basement are made of Porotherm ceramic fittings and insulated with polystyrene. The perimeter walls of the above-mentioned floors are also made of Porotherm ceramic fittings with embedded thermal insulation. Ceiling structures are reinforced concrete. The plot is mostly flat. The thesis contains the drawing and documentation in the form of the implementation project, the design includes also the thermal technical assessment, the fire safety solution, the acoustic assessment and the lighting assessment.
School of Arts in Valašské Meziříčí
Hejl, Martin ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The final thesis is focused on a new building of School of arts in Valašské Meziříčí. The object has three floors, it has a basement and two above-ground floors witch a flat roof. A loadbearing structure is made of skeleton - reinforced concrete monolithic columns and reinforced concrete monolithic floor slabs. Filling masonry is made of ceramic tiles. Object has thermal insulation by mineral wool. Detailed solution of final thesis deals with the solution of main building School of arts, where are the schoolrooms and technical facilities. In the other parts of the object are a staff facilities, multipurpose hall, café and underground garage.
Construction Technology Project Roofing of the Family Park Bruno Building
Halanič, Daniel ; Selník, Petr (referee) ; Mohapl, Martin (advisor)
The barchelor thesis deals with the constructive and technology projeck roofing of the family park Bruno building. It solvesimplementation of the warm flat roof. The work includes technical report, budget, technological regulation, suggested construction site installations, time frame, proposal of machines and other technical documentation in compliance with assignment.
Apartment building
Barglová, Karolína ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
A subject of bachelor thesis is a new apartment building and the processing of the design documentation for construction. The apartment building is located in a quiet part of a town Zubří, near the city center. The surrounding area consists mainly of apartment buildings. This object is detached with a cellar and four floors. There are spacious maisonettes in the third and fourth floor, which have terraces in the fourth floor. A car park is located close to the building. In immediate proximity there is established a wheelchair access to the object via an outdoor lift. Vertical supporting structures in the above-ground floor are made of ceramic blocks Porotherm, in basement they consist of blocks of permanent formwork. The horizontal structures are prefamonolithic, they are made of ceramic beams and ceramic inserts Miako. The building is based on concrete foundation strips and the top of the building is a warm flat roof.
Family House with an establishment
Macháčová, Kateřina ; Plachetský, Jiří (referee) ; Čuprová, Danuše (advisor)
The project solves a new family house with an establishment in a quiet location in the local area Loučka in Lipník nad Bečvou. Establishment is used as veterinary surgery. The building is situated in flat terrain. It is a detached building with aboveground two floors. The Construction system consists of masonry Porotherm, further insulated system Baumit Pro and horizontal structures Miako, also Porotherm. Roofs designed as single-casing flat roof with gravel flat and on two levels. The house is founded on primer passports.

National Repository of Grey Literature : 403 records found   beginprevious21 - 30nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.