|
|
Apartment house with hairdresser´s in Vyškov
Volková, Markéta ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with documentation of an apartment building with hairdressing salon project, found in Vyškov. The apartment has partial basement, main entrance from the north side of the building, and irregular, double rectangle-based shape. Near the main entrance is located bike storage room. Parlor is in the first floor above ground, and has separate entrance located on the north side. Building is located on slightly sloping terrain in which it is partially embedded. It also has five above ground floors, with one floor below ground, and is covered with a partially walkable flat roof. Basement consist of a cellar rooms, utility room and a workroom. Inside above ground floors are residential areas made from fourteen dwelling units, while one dwelling unit in the first floor is wheelchair accessible. The building is designed from Porotherm, a single masonry system. Thermal insulation of the building is carried out by contact insulation system. The horizontal structures are made of Spiroll ceiling panels.
|
|
|
Energy-saving detached house
Klečková, Kateřina ; Bantová, Sylva (referee) ; Čuprová, Danuše (advisor)
The subject of this Bachelor’s thesis is a new construction of energy-saving twostorey detached house without basement, built in Zlin. The shape and height setting of the object adapt to the land and the surrounding area. The house is suitable for housing a family of five members. The main entrance and the vehicle access to the building are on the 1st floor from the street level Nivy IV. The house has a cuboid shape with terrace on the east side. There is a garage for one car on the western side. The main living rooms are oriented on south. The vertical structure is made of the ceramic blocks. The ceiling above the second floors is stacked from ceramic inserts, 1st and 2nd floor are connected by reinforced concrete staircase. The house has a flat roof. The project was prepared in a computer program AutoCAD.
|
|
|
A Small Theatre Brno
Kloz, Lukáš ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Brzoň, Roman (advisor)
The aim of the thesis was to create the individual degrees of project documentation – documentation for building permit and building design documentation on the basis of the study, processed in the subject AG34. The subject of the bachelor’s thesis is project of new building – small theatre in Brno. The Building is situated in Brno, Brno-město, on street Údolní. The Area borders with Špilberk on south, surrounding buildings from east, comunication for pedestrians from west and street Údolní from north. Area is also conected to Obilní Trh across the street Údolní. The Site of project is unutilized in these days. It is optimal area for construction of theatre because this area is busy and there are missing cultural facilities. The New bulding is composed of two main sections. It is building of theatre and building of museum and administration. Project also deals with surroundings, important for pedestrians, supplying and preservation of vegetation. A part of project solves new access to Špilberk from the north. The object of museum and administration connects surrounding building and follows the shape. Main rooms form exibition areas. Other spaces are destined for education and administration. The object of theatre is situated separately. It is moved aside from the street line so it allows to make a spread area in front of main entrance. Main rooms form the main hall on the ground floor and the side hall on the second floor. The Entrance hall is supplemented with a dinning hall. Theatre background is composed of changing rooms for actors, storerooms and rooms of technical equipment. Both of the buildings are separated by comunication for pedestrians which connects Špilberk with street Údolní. Estate is supplemented with exterior amfitheatre which is embed in hillside and parking lot for public.
|
|
|
Apartment Building, c.u. Klatovy
Smolíková, Zuzana ; Pospíšil, Jaroslav (referee) ; Kolář, Radim (advisor)
The aim of the Bachelor’s thesis was to design a self-contained building in Klatovy. The rectangle shaped building is two-storey with a partial basement and a flat roof. The main entrance is oriented to the east. Next to the building there is a parking lot. The building consists of 4 dwelling units: 3x a 2- bedroom unit and 1x a 3-bedroom unit. The external wall of the basement is designed as permanent formwork. The masonry of the ground and first floor is designed of clay blocks porotherm. The roof structure is designed as a reinforced concrete slab. The whole building is insulated to meet all the requirements of energy consumption of buildings. The main focus of the Bachelor’s thesis is on construction project documentations.
|
|
|
Detached house with lawyer's office
Prosnanová, Dominika ; Julinová, Patricie (referee) ; Bečkovský, David (advisor)
The goal of this bachelor’s thesis is to project a detached house with a lawyer’s office. It consists of two separate buildings. The detached house has two floors above the ground level and a basement. The lawyer’s office is projected as a single floor building with a barrier free access. Both buildings‘ construction systems are made out of limestone-sand blocks. The ceilings are monolithic and made out of reinforced concrete. The roof is flat on both buildings and weighted down by river aggregate.
|
|
|
Web Application for Thesis Management
Stodolová, Martina ; Neuwirth, Bernard (referee) ; Dydowicz, Petr (advisor)
This master‘s thesis deals with the design and implementation of a web application for the management of diploma theses for students and their supervisors. It defines theoretical starting points for web applications. Based on requirements and analysis of current solutions, it provides a proposal for application, description of implementation, economic evaluation and summary of benefits.
|
|
|
Family house Vojkovice
Juříček, Marek ; Kalánek, Jiří (referee) ; Eliáš, Luboš (advisor)
The theme of this work is the construction of newly family house in Vojkovice. The building has two floors and a basement. The land is sloping with a drop on one floor. The house is designed for 4 family members. The main entrance is in the first floor, where is also situated a garage for two cars. Vertical constructions are made of ceramic bricks Porotherm and concrete blocks. The cladding is insulated contact insulation. All ceiling construction is Porotherm systém as well. The roof is designed as a single-ply flat. The building is adequately lit and naturally ventilated.
|
|
|
Detached house with a dental practice in Mírovka
Dvořák, Martin ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This bachelor’s thesis deals with the project of a detached house with a dentist’s in Mírovka which is located close to the district town of Havlíčkův Brod. The detached house is intended for a five-member family, it has two floors and one basement. The dentist’s is a single-storey unit which is not connected with the detached house. The exterior load-bearing structure in the above-ground floors is designed of aerated concrete masonry units complemented with a contact thermal insulation system according to ETICS. The exterior basement wall is made of shuttering blocks filled up with concrete and complemented with thermal insulation. The horizontal load-bearing structures are designed of prestressed concrete floor slabs which are put on a reinforced concrete wreath. The detached house and the dentist’s are roofed with inverted roof.
|
|
|
Gantry crane control via Modbus TCP
Arm, Jakub ; Štohl, Radek (referee) ; Kaczmarczyk, Václav (advisor)
Modbus TCP is a protocol for communication via ethernet bus. Goal of this work is realization of control of gantry crane model from personal computer. It is accomplished by Modbus converter, which communicates via ethernet bus. There are two ways of controlling. By graphic user application written in C# or by web pages running on created HTTP server. All services use created library, which is written in C language and communicates via Modbus TCP with Modicon Momentum unit. This unit interprets orders in form of Modbus protocol to controlling of standard industry inputs and outputs for process instrumentation. This process instrumentation is binded to control the gantry crane model.
|
|
|
Single-spar Travelling Crane MV 6,3/9
Čížek, Ondřej ; Pokorný, Přemysl (referee) ; Mynář, Břetislav (advisor)
Bachelor’s thesis will deal with single-spar travelling crane with under crane trolley, lifting capacity 6,3t. Aimed at design main structural parts, which I split to three main parts. First part will deal with design crane bridge, second part will design crosspiece and third part will design screw connection. In calculations and designs I keep to the ČSN standards and crane design literature. This Bachelor’s thesis was written by cooperation with Iteco company.
|
guest ::
