|
|
Marketing Communication
Baťková, Nikola ; Havíř, David (referee) ; Mráček, Pavel (advisor)
This thesis deals with the design of marketing communication for a family business that sells heating and cooling equipment. The Impulse for the development of the communication is cooperation with the supplier as an authorized sales and service partner. The aim is to design a marketing communication that will be a suitable basis for both the analysed company and the supplier. On the basis of the performed analyses, designs will be drawn up that respect the requirements of the client.
|
|
|
Strength analysis of hydraulic equipment construction
Burian, Martin ; Klezla, Vojtěch (referee) ; Zeizinger, Lukáš (advisor)
This thesis deals with the strength analysis of two tanks of hydraulic power units using finite element method. Introduction consists of a brief description of these units and description of a current solution. An analysis of force effects and load conditions follows. The next part describes the calculation model and then the calculation results. Based on these results to improve mechanical properties, a proposal is made. The attachment of this thesis is drawing documentation. The thesis was created in cooperation with Bosch Rexroth, spol. s r. o.
|
|
|
Optimized Power Factor Compensation Using Capacitor Banks
Kseňak, Ján ; Hammer, Miloš (referee) ; Poliščuk, Radek (advisor)
The aim of the thesis is the design of a power factor controller for the power grid, including HMI. The theoretical part of the thesis is divided into two logical units. The first unit explain the problem of power factor correction in a linear electrical environment, without considering harmonic distortion. The second theoretical unit describes the technologies, applied in cooperative simulation environment. A virtual commissioning of the whole system was performed in the simulated environment. The empirical part of the thesis describes the architecture of the Mosaik simulation framework. Then folows description of the controller, its integral components and the HMI. In the last chapter, the whole system was put into virtual operation, in order to perform function tests. The controller was tested on change of the power factor setpoint and to test the reaction on system change, without losing the power factor compenation.
|
|
|
Analysis of material flow in a logistics center with external production entities using computer simulation
Tůma, Dominik ; Krejčí, Miroslav (referee) ; Urbánek, Michal (advisor)
Warehousing companies often reach a point where they need to examine and improve their internal material flow setup. This is often overlooked and not given as much attention. For this reason, the bachelor thesis, in cooperation with JITRANS Logistik, deals with the problem solving in the most problematic warehouse in Dačice. The aim was to evaluate historical data - to determine the warehouse utilization during individual shifts, and to improve the throughput of the current warehouse by proposing two optimization options, using simulation models. The Tecnomatix Plant Simulation software designed by Siemens was used to create the simulation models. The simulation models were compared with each other using simulation experiments. Subsequently, the data obtained from the simulation experiments were evaluated and recommendations for optimizing the material flow were proposed. These suggestions will be submitted to JITRANS Logistik.
|
|
|
Thermoregulatory generator for a small combustion boiler
Kováč, Samuel ; Babička Fialová, Dominika (referee) ; Jecha, David (advisor)
With increasing requirements for the full use of the heat that is produced, the effort to use waste heat is also increasing. One of the possibilities for such heat is the direct conversion of thermal energy into electrical energy. A device called a thermoelectric generator (TEG) is used for this purpose. Nowadays, it is in the constant development part of their existence. The limiting active substance is the known thermoelectric materials. Nevertheless, this technology finds its use in practice. This work is characterized by the basic principles of thermoelectric conversion, the materials discovered so far and their efficiency, and lastly the TEG patients in a lump wood gas boiler. The main idea of the project, which is ongoing in cooperation between BUT and Ecoscroll, is the development of a small combustion device, a household boiler for wood fuel with manual attachment, which would meet the emission parameters of the Ecodesign Directive 2009/125/EC, can function independently of the connection to the electricity network.
|
|
|
Grammar Systems and Their Applications
Kříčka, Dalibor ; Klembara, Radovan (referee) ; Meduna, Alexandr (advisor)
This thesis aims to introduce a new type of cooperating distributed (CD) grammar system based on already existing types, then define a specific grammar system of the new type and apply it within a parser. The newly introduced type combines features of the hybrid CD grammar system and CD grammar system with internal control and emphasizes the determinism of cooperation protocol. The explicitly defined grammar system applies three methods of syntactic analysis (LL predictive, precedence and SLR) and accepts a subset of C++ language. The practical aspect of this thesis demonstrates the applicability of the mentioned grammar system by console application, which implements the forepart of a compiler based on this system.
|
|
|
Modification of the AFW150 paver design to enhance production efficiency with new technology incorporation
Šrenk, Vojtěch ; Kolomý, Štěpán (referee) ; Slaný, Martin (advisor)
The thesis focuses on the modification of the auger mechanism design on the AFW150 paver to improve its production efficiency and to use new production technologies in cooperation with Ammann. The thesis deals with the identification of available competitive solutions and evaluation of their parameters. Based on the obtained knowledge, the input requirements are defined, which the proposed variants reflect. These further influences the design solution itself, the mechanism assembly procedure, production design and analytical calculations of bearing, chain, and driveshaft stress durability. Changes in the manufacturing procedures and technologies used in the subassemblies of the mechanism are proposed in the thesis. The proposed and implemented changes are aimed at reducing production costs. The conclusions of the thesis then focus on the economic and technical aspects of the proposed solution and their evaluation.
|
|
|
Analysis and Visualization of Brno Traffic Data
Ondrušková, Magdaléna ; Burget, Radek (referee) ; Hynek, Jiří (advisor)
The aim of this work was to analyze two traffic datasets from the Waze navigation application and to create a web application to process, analyze and visualize the results. The web application is intended to serve not only the citizens of the city Brno, but also to the staff of the transport department for better understanding and more efficient transport planning. The application is implemented using the FastAPI framework and the React library. In cooperation with the staff of the transport department, the application has been tested by real users. The results of this work are a web application that allows users to analyze traffic on selected streets and routes and better understand and define the most critical sections for traffic in the city of Brno, with the potential to expand to other cities.
|
|
|
Revision of Minor Geodetic Control within the Complex Land Consolidation
Staško, Samuel ; Drápela, Zdeněk (referee) ; Bureš, Jiří (advisor)
The aim of the work is to carry out in cooperation with Ageris s.r.o. a revision of the detailed position point field (DPPF) and its subsequent completion for the needs of the complex land consolidation (CLC) in the cadastral area of Hřivinův Újezd. The basis for the revision of the DPPF was geodetic data. The existing points of the DPPF were identified during the field visit and located using the local descriptions and measurements indicated in them. Their location was verified by GNSS-RTK measurements. From the results of the review, documentation was prepared, which also included a proposal for the addition of the existing DPPF. After the proposal was approved by the Land Registry Office in Zlín, the new geodetic points were stabilised and geodetically surveyed using the GNSS-RTK method, occasionally by terrestrial means. After the completion of the field measurement work, the appropriate documentation was prepared for the newly added geodetic points of the DPPF, which was subsequently adopted into the technical documentation of the Zlín Land Registry Office.
|
|
|
Recycling
Mrázek, Mikuláš ; Morys, Oldřich (referee) ; Korbička, Pavel (advisor)
The intention of the bachelor thesis is mainly to highlight the surplus of materials and the overwhelming of the planet with waste, the possibilities of recycling solid materials such as metal and remelting them into other objects. Working not only with the material but also with the people inside the scrap metal is essential. Creating a social contact with the workers and working together to transform the waste into sculptural works and create a video is essential for the bachelor thesis.
|
guest ::
