|
|
Technical and technological audit of the water treatment plant
Jedličková, Tereza ; Svoboda, Pavel (referee) ; Kučera, Tomáš (advisor)
The aim of the submitted diploma thesis is the implementation and evaluation of the technical and technological audit of water management systems of water treatment plants – concretely Plzeň Water Treatment Plants. Part of its audit is a description of potable water production, including the evaluation of the TEA Water treatment plant, evaluation of quality assurance of raw and produced drinking water, analysis of costs and pricing costing, personnel evaluation, care of the plant and draft measures for better working of the whole system. The work also focuses on the characteristics, history and the past reconstruction and more detailed description of the individual cleaning stages of the selected water treatment plant in Pilsen. The audit itself was preceded by the study of current legislation, namely the Law No. 274/2001 Coll. and Decree No. 428/2001 Coll. The diploma thesis also describes performing laboratory analyzes in an accredited laboratory of Plzeň Water Treatment Plants.
|
|
|
Safety of workpiece clamping device
Mahel, Petr ; Bradáč, František (referee) ; Blecha, Petr (advisor)
Master’s thesis is dealing with safety of workpiece clamping device. In the first part we are describing possibilities of clamping workpiece on different machines, legislative conditions in EU and CR in engineering devices, and general demands that refer to harmonized standards for different types of clamping devices. The main target of the thesis are the lists of requirements for hydraulic three-jaw chucks and proposal of two chosen safety applications. The first safety application refers to safety of clamping workpiece in hydraulic chuck. The second safety application is aimed at clamping of workpiece with the help of strap clamps. There is a description of the procedure of calculation of safe tightening moment during assembly of the nut.
|
|
|
Výroba a vlastnosti paliv pro zážehové motory
Beer, Erik
Bachelor thesis is entitled "Production and properties of fuels for petrol engines". Work includes at four key points and it characteristics ,production, storage and transportation of the fuel type. Another section deals with the legislative requirements for a given fuel. On the introduction summarizes the history of petrol engines and also the history of fuel for petrol engines and a brief summary of today fuels used for these engines. The first part is devoted to the chapter on motor gasoline. Another chapter describes a liquid petroleum gas, the third part of compressed and liquefied natural gas. Further follow the desctiption of ethanol and its using as E85. The last chapter is devoted to lesser-used fuels in automotive transport. The conclusion is devoted to the evaluation and development of fuels in the automotive market.
|
|
|
The analysis of laboratory X-ray device using possibilities and detection to ensure the entery into nuclear power plant.
Vlk, Petr ; Zeman, Miroslav (referee) ; Varmuža, Jan (advisor)
The thesis deals with the use of X-ray device for analysis of imported objects when entering a nuclear power plant. It describes the principles of X-ray generation and detection and techniques used in current X-ray devices. The thesis includes analysis of legislative requirements related to the safety of nuclear power plants and operation of X-ray devices. The benefit of the thesis is a proposed laboratory task using the Heimann HI-SCAN 6040-A X-ray device, which demonstrates detection and differentiation of analyzed objects and various types of materials. An integral part is the verification of the dose rate limits near the laboratory X-ray device, based on the knowledge of the legislative requirements.
|
|
|
Compared to domestic heating boilers
Budai, Karel ; Brázdil, Marian (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with assessment of domestic heating boilers. The first chapter describes the technology of boilers for heating a family house per the used fuel. The second chapter deals with the comparison of the legislative requirements imposed on the solid fuel and natural gas boilers. The final chapter deals with the economic assessment of selected boilers in terms of acquisition and operating costs.
|
|
|
Machine tools safety
Smetana, Štěpán ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
This Master’s thesis concerns about the safety of machinery, in the literary research part you can find information about the law system and requirements of European Union and Czech Republic. There is a description of the legal enactments, which the manufacturers of machinery needs to follow. Second part of this thesis is about the safety of a milling center. The milling center is analyzed here, you can find here the description of its components. The milling center was then described with the help of block diagrams. For each component from the block diagram you can find here a list of dangerous situations which can occur and also a list of safety precautions for each situation. Based on these information the list of requirements for the milling center was made.
|
|
|
Sustainable management of municipal waste
Širůček, Vojtěch ; Niesner, Jakub (referee) ; Klimek, Petr (advisor)
The bachelor’s thesis is focused on the issue of disposal of biodegradable municipal waste management. The thesis asseses the current situation and possible ways of management with this kind of waste. Emphasis is placed on efficient utilization. Aim is to design of possible solution to eliminate landfilling of municipal waste in the Czech republic in accordance with legal demands of the European Union.
|
|
|
Workshop legal and economic requirements of Europeana Cloud
Pejšová, Petra
2. 10. – 5. 10. 2013 proběhla zahraniční cesta v rámci projektu Europeana Cloud: Unlocking Europe’s Research via The Cloud pod zkratkou eCloud. Jednalo se o dva po sobě následující workshopy. První workshop byl věnován k legislativním a druhý ekonomickým otázkám fungování budoucího Europeana Cloudu. Workshopů se zúčastnila PhDr. Petra Pejšová, která je členem pracovního týmu pro právní, strategické a ekonomické otázky projektu. Workshopy proběhly na University of Edinburgh, Edinburgh, Skotsko, Velká Británie.
Fulltext:  PDF; PDF
|
|
|
Dangerous Products on the Czech Trade and System of International Exchange Information RAPEX
HONDLÍKOVÁ, Zuzana
My bachelor's thesis deals with problems of dangerous products on the market in the Czech Republic and with rapid alert system providing international exchange of information (RAPEX). The import of dangerous products to EU countries, which means also our country, is increasing because of the trade liberalization. Therefore, I wanted to find out in my thesis if non-proffessional public is informed about these problems and if people are interested in it. The aim of this thesis was to find out and analyse dangerous non-food products on the Czech market in 2011. As the Czech Republic is a member of the European Union, it is essential to see the analysis of international rapid alert system outputs in European standards. Furthermore, I focused on countries of origin that mostly import dangerous products and I monitored the usual kind of products. The data from Ministry of Health, Regional Health Protection Agencies and European Commission were used as a source of information for my research. By means of questionnaires I investigated knowledge of a specific group, namely mothers of preschool children. The problems of products dangerous for preschool children concern especially the mothers. The bachelor's thesis contains a theoretical and a practical part. The theoretical part deals with European Union and Czech legislative requirements for objects that are commonly used, included materials and objects coming into contact with food, toys, cosmetics and products for children up to three years old. Non-proffessional people play the role of product consumers, so their rights and obligations are also included in the theoretical part. Equally, activities and competences of Health Protection Agencies are involved. I chose a combined attitude to data collecting and analysing in the practical part of the thesis. At first data collection was accomplished, then it was studied by the method of side data analysis. Subsequently, a quantitative research was applied, where a feedback from non-proffessional public was gained. There I found out public's attitudes, knowledge and customer behaviour. Particular aims of the bachelor's thesis were met. It was established that respondents have not enough information about the problems or rather they do not pay much attention to them. Respondents also do not trust Regional Health Protection Agencies. However, their customer behaviour can be assessed positively. The side data analysis showed that products from China often come to European market, especially clothes and toys. The presence of carcinogenic hydroquinone seems to be the worst danger that can appear in cosmetic products. The biggest risk of toys and products for children up to three years old is asphyxication as a result of technical imperfections. The bachelor's thesis could be used as a helpful source when teaching hygiene of commonly used objects. Or it could be used in the mass media as a source of information for non-proffessional public.
|
|
| |
guest ::
