|
Ruthenium (II) Complexes with 6,7-Diaza[5]phenacene.
Beránek, Tomáš ; Žádný, Jaroslav ; Jakubík, Pavel ; Církva, Vladimír ; Storch, Jan
In this work we focused on preparation of novel bidentate and fully aromatic N,N-ligand and its ruthenium complexes. 6,7-Diaza[5]phenacene (1) was synthetized from 4-bromoisoquinoline by microwave-assisted tandem Hyama-Heck cross coupling reaction3 followed by photocyclization (Scheme 1). With 6,7-diaza[5]phenacene (1) in our hand, we prepared some new ruthenium(II) complexes (e.g. 2) , characterized them from structural point of view and determined some of their electronic and optical properties with regard to their application potential.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316112114160 - PDF
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Black Chromia Coatings on Metal Tubes for the Solar Collectors
Brožek, V. ; Mastný, L. ; Novák, M. ; Vilémová, Monika ; Kubatík, Tomáš František
This paper describes the results of the first phase of the study preparation, structure and properties of coatings modification of black chromium oxide on copper, aluminium, iron and zirconium tubes for solar collectors. The coatings are prepared by plasma spraying of liquid chromate method which is known as liquid precursor plasma spraying. Coatings have the function of an energy trap for thermal radiation wavelengths of 1 μm – 3 μm i.e. in the IR region. At the same time, the coating increases the corrosion resistance of metal substrates. The nanometric structure and thickness of the coating depend of the feeding distance and the concentration of chromate precursors. For the deposition of nanometric splats of melt chromiumIII oxide, a new type of feeder that injects precursors into the water stabilized thermal plasma produced by the WSP® generator has been\ndeveloped.\n
|
|
Travel Behaviour of the Prague Suburb Population
Pergl, Ondřej ; Novák, Jakub (advisor) ; Marada, Miroslav (referee)
Travel behavior of Prague suburb population Abstract The hinterland of Prague is formed by the process of suburbanization, which influences the spatial structure of whole region. Changed spatial structure puts greater demand on the mobility of the population. The main aim of this work is the research of travel behavior of the Prague suburb population, who makes his movements primarily by the car. The work focuses on the factors influencing travel behavior, which are discussed in theoretical section. The next section discusses the measures against individual transport. The empirical part presents the results of survey in Prague southeast hinterland. Travel behavior is examined in terms of modal split and trip purpose. Further investagation is focused on citizens' satisfaction with the traffic situation in their municipality and reveals their sensitivity to various measures against car use. Key words: mobility, travel behavior, suburbanization, car use limiting, Prague
|
|
Population genetic analysis of Old Kladruber horse
Vostrá Vydrová, Hana ; Majzlík, Ivan (advisor) ; Karel, Karel (referee)
The Old Kladruber horse, along with the Lipizzaner horse, Andalusian horse and Lusitano horse, is of the original Italo-Spanish type. The Old Kladruber horse is kept in two colour varieties (grey and black). Because the population is closed, there is a concern about the loss of genetic variation. The genetic diversity and population structure were analysed in the Old Kladruber horse breed based on the pedigree information of animals that were registered in the Studbook to identify factors that may have affected the genetic variability of the breed. Pedigree records collected from 1729 to 2013 contained information on 7971 animals that were used in the analyses. The pedigree depth was up to 33 generations, with an average of 15.1 complete generations. The effective number of founders and ancestors contributing to the current genetic pool was 92.69 and 17.16, respectively. The average values of the inbreeding coefficient were as follows: 13% (with a maximum value of 29%) for the reference population (individuals that can currently take part in reproduction, n=612), 11% for the grey variety (with a maximum value of 25%) and 15% for the black variety (with a maximum value of 29%). The proportion of inbred animals was high (99%). The average rate of inbreeding in the reference population was 1%: 0.8% for the grey variety and 1.1% for the black variety, and the respective estimates of the effective population sizes were 52 for the reference population, 62 for the grey variety and 45 for the black variety. The estimated percentage of genetic diversity lost due to non-random mating within subpopulations and the reference population was 1.0, 1.0 and 1.2%, respectively. The total loss of genetic diversity in the reference population, in the grey variety and in the black variety was 11%, 13% and 17%, respectively.
|
|
Individual human odor as a forensic trail in criminal proceeding made by contact or contactless transmission and its resistance to physical agents
Santariová, Milena ; Bartoš, Luděk (advisor) ; Chmelíková, Eva (referee)
The dissertation thesis consists of four papers that have been published in scientific journals.
Study n. 1
The need to recover evidence from water is quite common in criminal investigation. The article deals with the possibility to collect human scent from such objects and with the ability of specially trained dogs to match such scent samples with scent samples collected from detained suspects. During an experiment, designed as a blind one, it has been proved, that human scent can survive on submerged objects and can be later used for scent identification.
Study n. 2
To collect odors the Czech Republic Police use special fabric sorbents manufactured under the registered mark ARATEX. Before use the fabric sorbent is treated by water vapor sterilization. After the scent identification the sorbent is destroyed. The goal of the study was to verify if the vapor sterilization is effective enough to remove human scent that has already penetrated into the sorbent structure or in other words if the sorbent can be exposed to vapor sterilization and then used again. Specially trained dogs were used to match starting odors with target odors in the line-ups. The results showed that dogs are able to correctly match human odors even after they have being exposed to vapor sterilization.
Study n. 3
The purpose of the study was to determine the temperature at which the human scent is degraded so that a dog would not be able to identify it. In contrast to expectations, eight dogs used in the experiment almost flawlessly identified human scents from five scent donors exposed to temperatures of 100°C, 200°C, 300°C, 400°C, 500°C, 600°C, 700°C, and 800°C. Only two of the dogs were able to identify 5 of 15 scent samples exposed to 900°C. No dog identified a scent exposed to 1000°C. Our study verified heat survivability of human scent far beyond existing expectations.
Study n. 4
We tested the hypothesis that if odor fallout (the release of a human odor onto an untouched object) in human subjects exists, then holding a hand above an absorbent will produce a detectable scent which will be subsequently matched in a detection test by trained dogs. Scents were collected from seven males to sterile cotton absorbent squares. The left hand was used to get the control scent and the right hand served as the target scent. Each experimental subject was sitting and his left hand was laid down on a cotton square for 3 min. The right hand was held 5 cm above another cotton square for 3 min. The scent identification was done by two specially trained police German shepherds. Both dogs performed 14 line-ups and correctly matched the collected scents of all test subjects. The results suggest the existence of human odor fallout, whereby a human scent trace is left by humans even if they do not touch an object.
|
| |
|
Corrosion behavior of plasma coatings CuAl10 and CuAl50 on magnesium alloy AZ 91
Kubatík, Tomáš František ; Stoulil, J. ; Stehlíková, K. ; Slepička, P. ; Janata, Marek
The most common magnesium alloy AZ 91 is widely used as a structural material, but its use is limited at higher temperatures and high humidity. Plasma spraying is a technology that allows to prepare protective metallic and non-metallic coatings on a wide variety of substrates including magnesium and its alloys. In this study, CuAl10 and CuAl50 were plasma sprayed on magnesium alloy AZ 91 with the aim to study corrosion resistance of the plasma sprayed coatings. The corrosion resistance of layers was evaluated by the method of electrochemical potentiodynamic measurement as well as long-term corrosion tests in a condensation chamber with 0.5 mol\nNaCl at the temperature of 35 °C for 1344 hours. Layers with 1, 2, 5 passes and passes of CuAl10 with the thickness ranging from 75 to 716 mm and CuAl50 with the thickness ranging from 64 to 566 mm were prepared. The increased corrosion velocity was observed in the case of thin layers of 2 and 5 passes due to the development of a galvanic corrosion couple. The CuAl10 layer prepared with ten passes has an outstanding corrosion resistance.
|
|
Study of dielectrical properties of organic material thin films
Pospíšil, Jan ; Boušek, Jaroslav (referee) ; Mikula, Milan (referee) ; Zmeškal, Oldřich (advisor)
The dissertation is focused on the study of electric and especially dielectric properties of thin film organic materials with their huge potential for optoelectronics and other industrial sectors. The theoretical part deals with the use of organic materials in organic photovoltaic cells, the methods of deposition techniques and characterization. The theoretical knowledge of the dielectric spectroscopy, including methods for determining the physical properties and evaluation of experimental data are also described. The experimental part is devoted to the study of small molecule organic solar cells with bulk heterojunction composed of electron donor molecule of DPP(TBFu)2 and electron acceptor fullerene derivatives, such as PC60BM, PC70BM and TC60BM. The experimental part is divided into two main parts. The first part deals with the study of processes occurring at the interface between the active layer and the contact; the second part is focused on transport processes inside the structure of photovoltaic cells and also contains a study of perovskite solar cells.
|
guest ::
