|
Treatment of Flue Gas from Waste Incineration by Sodium and Calcium Based Sorbents.
Zach, Boleslav ; Pohořelý, Michael ; Šyc, Michal ; Svoboda, Karel ; Punčochář, Miroslav
This paper is focused on properties of sodium and calcium based sorbents in relation to simultaneous dry flue gas treatment from SO2, HCl, NOx, solid particles, and polychlorinated dibenzodioxins and dibenzofurans (PCDD/F). The most important differences between the two sorbent types are: the effect of temperature and moisture of flue gas on the sorption process, reactivity towards individual acid components in the flue gas (thermodynamic equilibrium and kinetics), and solubility of air pollution control residues.
|
|
Puppies and young dogs nutritions
Šabatová, Kateřina ; Hučko, Boris (advisor) ; Plachý, Vladimír (referee)
Puppies and young dogs nutritions Summary In this work I have attempted to summarize the most important aspects in nutrition of puppies and dogs in growth. The introduction describes the digestive tract and also the changes that have occurred due to domestication. Next is explained the importance of nutrition and water in nutritional requirements of a dog. Important are needs of nutrients and energy that are necessary to maintain the provision of the necessary vital functions. The basic components of food are proteins, saccharides, lipids, minerals and vitamins. I explain the necessary proportions, the amounts and the possible consequences of their lack in food. I focus on essential fatty acids, which in recent years are subject to frequent explorations and their pros and cons are not yet fully understood. I also mention ballast and significant specific active substances. Nutrition of pregnant and lactating females is often neglected, but for puppies it is a very crucial period. The influence of nutrition of pregnant females to the size and weight of newborn puppies has been proved. Further I deal with nutrition of puppies immediately after birth, I explain the composition of colostrum and its effect on the immunity system of the puppy. I also compare ratios of nutrients in the colostrum and milk. Further, I deal with the feeding of the individual at the time of weaning and in different growth periods. There are many possibilities of feeding puppies from after weaning until adulthood described in books. With the new knowledge about nutrition the ways of feeding our dogs have inevitably changed , but also the dogs' nutritional requirements have changed due to the conditions where and how they live and what their nutrient needs are according to their sport, breeding or other use. Currently, there is a possibility of a commercially produced complete nutritional diet or home-prepared fresh food - cooked or raw- barf. In the last chapter, I summarized possible aspects of malnutrition and its potential consequences. I described the most common problems associated with inadequate nutrition of growing dogs such as obesity as well as malnutrition, which also adversely affects the individual. The influence of proper nutrition of the puppy on its growth is clear. If we neglect the nutrition of the dog in the first two years of its life, the consequences are often irreversible.
|
|
Microbiota of the digestive tract of bees and related insect and the influencing facftors
Hroncová, Zuzana ; Havlík, Jaroslav (advisor) ; Kalous, Lukáš (referee)
This thesis consists of six research chapters, out of which, five have already been published in research journals, 1 is in the process of submission and the last chapter presents original unpublished confidential data in the process of manuscript preparation.
The research presented in this thesis concerns the complex mechanisms of bees and wasps immune system focused on microbiota as component of immunity. As shown in the introduction, highly social and managed species of bees like honey bees and bumble bees, play key roles in natural and agricultural ecosystems worldwide. Recent losses of bees have been attributed to pesticide exposure, poor nutrition, increased parasite loads and habitat degradation. Over the past several years, governments, beekeepers, and the general public worldwide have become concerned by increased losses of honey bee colonies, calling for more research on how to keep colonies healthy. Our main aim was to explore the complex mechanisms of bees and related species gut bacterial populations, their links to insect immunity and investigate the opportunities for an intervention. Part of our aim was to characterise the bumble bee and wasp gut microbiota using 16S RNA sequencing in a search for potentially novel bacterial species.
We have tried to explain how microbiome interacts with the host and showed that major members of these communities appear to benefit the host. The simple gut communities of social bees present ideal model systems to investigate the underlying evolutionary and genetic processes of such interactions. Information based on our results may help in the design of proper probiotic supplementation strategies with respect to physiological conditions in the honey bee gut.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Czech-german cultural differences in german company from the point of view czech and german workers.
ZELINKOVÁ, Dominika
The work deals with the contrasting the Czech-German cultural standards, both generally and specifically in the German travel agency Wolff Ost. Reisen, which has one of the branches in the Czech Republic. The study describes and characterizes the different cultural dimensions and standards, including theoreticians, who deals with the various dimensions. Part of the work is devoted to characterize the specific Czech-German cultural dimensions and standards, from the Czech and also from the German point of view. The outcome of this work is a survey, which was conducted by the company in Germany and a branch in Prague. The work also includes research methodology and characteristics of the enterprise. A separate chapter is devoted to evaluation of the survey.
|
|
Properties of Aerosol, Produced by Laser Ablation of Standard Materials for ICP-MS Analysis.
Holá, M. ; Nováková, H. ; Ondráček, Jakub ; Vojtíšek, M. ; Kanický, V.
Laser ablation (LA), together with inductively coupled plasma mass spectrometry (ICP-MS) as a detection system, has become a routine method for the direct analysis of various solid samples. The product of laser ablation contains a mixture of vapour, droplets and solid particles. All components are finally transported to a plasma by a carrier gas as a dry aerosol including mainly agglomerates of primary nanoparticles. In general, characterisation of aerosols by their particle size distribution (PSD) represents indispensable tool for fundamental studies of the interaction of laser radiation with various materials. The particle size distribution of dry aerosol originating from laser ablation of standard material was monitored by two aerosol spectrometers – Fast Mobility Particle Sizer (EEPS) and Scanning Mobility Particle Sizer (SMPS) simultaneously with laser ablation - ICP-MS analysis.\n
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016102412241 - PDF
|
|
Single particle analysis of size-segregated aerosol in Prague city center
Marvanová, S. ; Skoupý, Radim ; Kulich, P. ; Bendl, J. ; Hovorka, J. ; Machala, M.
Particulate matter (PM) is omnipresent pollutant in the ambient air known to cause cardiovascular and respiratory diseases (WHO 2004). Recently, outdoor air pollution and particulate matter in outdoor air pollution were classified as carcinogenic to humans, Group 1 (IARC 2015). Especially, ambient PM of aerodynamic diameter < 100 nm, ultrafine particles, appears to be of great importance due to its high specific surface area and high number concentration (Hughes et al. 1998). Ultrafine particles also easily enter and are being transferred in organisms, and interact with cells and subcellular components (Oberdorster et al. 2005). As the evidence of ultrafine PM significance increased, size-fractionated PMs sampled by various cascade impactors have been employed into the toxicological studies on cell cultures or isolated cells, using the organic extracts of size-fractionated PMs (Topinka et al. 2013, Topinka et al. 2015) or directly the size-fractionated particles (Becker et al. 2003, Ramgolam et al. 2009, Reibman et al. 2002, Loxham et al. 2013, Jalava et al. 2006, Thomson et al. 2015, Jalava et al. 2015). The aim of this study was to evaluate shape and composition of size-segregated aerosol particles, sampled by high volume cascade impactor, using electron microscopy and energy dispersive X-ray spectroscopy (EDX).
|
| |
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Digital circuits test optimization by multifunctional components
Stareček, Lukáš ; Gramatová, Elena (referee) ; Kubátová, Hana (referee) ; Kotásek, Zdeněk (advisor)
This thesis deals with the possibilities of digital circuit test optimization using multifunctional logic gates. The most important part of this thesis is the explanation of the optimization principle, which is also described by a formal mathematical apparatus. Based on this apparatus, the work presents several options. The optimization of testability analogous to inserting test points and simple methodology based on SCOAP is shown. The focus of work is a methodology created to optimize circuit tests. It was implemented in the form of software tools. Presented in this work are the results of using these tools to reduce the test vectors volume while maintaining fault coverage on various circuits, including circuits from the ISCAS 85 test set. Part of the work is devoted to the various principles and technology of creating multifunctional logic gates. Some selected gates of these technologies are subject to simulations of electronic properties in SPICE. Based on the principles of presented methodology and results of multifunctional gates simulations, analysis of various problems such as validity of the modified circuit test and the suitability of each multifunctional gate technology for the methodology was also made. The results of analysis and experiments confirm it is possible for the multifunctional logic gate to optimize circuit diagnostic properties in such a way that has achieved the required circuit test parameter modification with minimum impact on the quality and credibility of these tests.
|
guest ::
