|
Specifics of nursing care of a child patiens with oncological pain.
ČAŇKOVÁ, Helena
The topic of the thesis is: Specifics of nursing care of a child patient with oncologic pain. Children{\crq}s pain is a phenomenon surrounded by many myths and false information. It is also not sufficiently assessed and treated and often bagatelized by both nurses and doctors. Nurses play irreplaceable role in pain treatment, they are with the child patient more frequently then the doctor and are in close touch with the child{\crq}s parents. The care of a suffering child is a serious task in nursing. Treatment of a patient in pains requires a complex, holistic approach. Nurses, even if they diagnose pain properly, do not set an adequate nursing care plan and do not carry it out. Nurses have to defend interests of the sick child and must not let him/her suffer. The data was obtained by quantitative and qualitative research. The quantitative research was carried out by the technique of anonymous questionnaire. The questionnaire was made for the parents of children with oncologic disease. The qualitative research was carried out by the technique of semi-structured in-depth interview. The research sample consisted of nurses working at the Department of children{\crq}s oncology One of the aims of this thesis was to outline the problems in nursing care of a child patient with oncologic pain from the point of view of the parents. We observed if the parents had been informed about their child{\crq}s pain, if they know what symptoms they should watch in their child, if they know all the aspects of pain to be assessed and treatment methods to relieve the pain and also how nurses respond to their child{\crq}s pain. For this aim, a following hypothesis has been set forth: The parents of children patients with oncologic pain are educated about the possibilities of nursing care focused on relieving the pain. This hypothesis was confirmed by statistic testing. Another aim of this thesis was to find out the specifics of nursing care of a child patient with oncologic pain. Nurses think that the specifics of nursing care of a child patient with oncologic pain are not different from any other care of a child in pains. They just state that an oncologic disease is associated with pains caused by the disease itself or by diagnostic or therapeutic procedures. Therefore they consider a specific feature the fact that the pain is observed more intensively and the staff is more precise in relieving the pain. It is obvious from the research that it would be effective for both parties, both for the nurses and the parents, to use educational materials on pain intended for them. I suppose that if there were such materials available, the parents would not need to contact nurses repeatedly. There was also a positive finding in the research that 92.5% of parents stated that nurses respond to children{\crq}s pain within 10 minutes. Further, that nurses believe that the child has pains, which was stated by 98.2% of the parents.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Miřenka Čechová
Janečková, Kateřina ; PETIŠKOVÁ, Ladislava (advisor) ; SOPROVÁ, Jana (referee)
Monographic work focuses on artistic creation Miřenka Čechová, one of the
the leading personalities of our contemporary stagecraft. Her personal and
artistic development started when she began studying dance and continued to
mimic and physical theater. Material presents her contribution to
contemporary Czech scene physical theater and refers to her international
success. Work observes her role like co-founder of physical theaters Theatro
Pantomissimo and Spitfire Company and to presents the work of these
physical theaters and reveals the working and teaching methods in the
preparation of copyright performances.
|
|
Folk culture in memories of people born in 20s and 30s of 20th century
Horová, Kateřina ; STAVĚLOVÁ, Daniela (advisor) ; FRIČOVÁ, Marie (referee)
This thesis is focused on memories of people born in 20s and 30s of 20th century about traditional folk culture. It is focused on observing original traditions and celebrating traditional festivities and what sense had these traditions for them and how they ment it. First part of this thesis is focused on narratives life stories. Second part is about memories of traditional customs and habits and how was changing their way of celebrating during prewar period, war and in time of socialism. Last part is dedicated to dancing. Storytellers spoke about dancing opportunities, their own dance experience and dance perofrmances in the theatre.
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
|
Arctic tundra dendrochronology
Lehejček, Jiří ; Svoboda, Miroslav (advisor) ; Monika, Monika (referee)
Historically unprecedented environmental change in the Arctic ecosystems is often given into the context of its past and possible future development. In the region where instrumental meteorological observations are scarce archives need to be investigated in order to address this issues. The comprehensive synthesis one of the archives: long-live circumpolar evergreen Juniperus communis L. shrub is presented here. 20 individuals from southwest Greenland were investigated at the cell anatomy level to understand the ecology of the species and unhide its potential for environmental and climate reconstructions. The findings are as follows:
i) Stop of exponential cross-sectional conduit-lumen widening with increasing age is in contrast with conduit-lumen nature of trees. This indicates that shrubs do not need to saturate their water and nutrient demands via traits of classical hydraulic conductivity law but rather developed different mechanisms. Extreme weather conditions result in prostrate growth form. However, different weather factors probably influence shrub growth differently: While snow and wind act mechanically (a), temperature influences the form of growth physiologically (b). a) So long as the young shrub stem has high resilience to bend back to an upright position after snow melt and so long as it can withstand the wind during the vegetation season it most likely grows upright and the conduit-lumens widen. b) Temperature, resp. freeze-thaw events are responsible for the shrubs preference of safety (finite size of conduit-lumens) over hydraulic efficiency, thus not allowing for more primary growth. All of these (and other) factors are apparently working together and the transition of vertical to more horizontal growth is gradual. As a consequence, the conduit-lumen sizes may not have to be further increased (due to ecophysiological restrictions possibly also must not) because water is no longer transported against gravity.
ii) Observed age/growth trend has to be taken into consideration for further employment of the wood anatomical parameter in paleoenvironmental studies. That is, shrub cell parameters can only be used for this purposes if correctly detrended. This allows for more accurate as well as longer reconstructions because youth trend was often neglected in reconstructions based on shrub annual-rings.
iii) The south-western Greenland Ice-Sheet (GrIS) melt rates reconstruction is presented for the whole 20th century. This part of GrIS is considered as the most active. According to the presented reconstruction current GrIS melt rates are not uncommon for the last century being comparable to first decades of 20th century. This finding is particularly important contribution to the debate on Atlantic meridional overturning circulation (AMOC). Too high fresh water inputs into the Northern Atlantic from GrIS melting may slow down or even stop the AMOC which would result in more continental climate in Europe. Presented results indicate that this threshold lies higher than observed current melt rates of GrIS.
Fascinating Juniperus comunnis species has shown to be able to address many ecological as well as environmental open questions and due to its longevity and abundant distribution has a great potential to become an important player in the Arctic research.
|
|
Influence of meadow management on the migration behavior of selected species of butterflies
Bubová, Terezie ; Langrová, Iva (advisor) ; Farkač, Jan (referee)
Migrations are the key process and one of the basic biological features, which allow survival of endangered species in fragmented landscape. In the last decades, agriculture intensification, industry and urbanization caused that number of natural butterfly habitats has significantly decreased. The localities originally suitable for butterflies are currnetly converted to farmland or building plots. This PhD thesis aimed to find a compromise solution of meadow management, which should allow a commercial use and concurrently do not jeopardize the continued existence of endangered or threatened species. The main idea of this study was in the intentional emigration causing in the middle of flight period, which should lead into resettlement of the population to another (potentially more suitable) locality. Possibility of aimed manipulation with butterfly emigrations would be considered as a major breakthrough in their protection.
The investigated species Phengaris nausithous (Bergsträsser, 1779) and Phengaris teleius (Bergsträsser, 1779) are both considered to be flagship species for protection of European butterflies at open meadows. This study is based on research, which was carried out in 2013-2015 at 17 patch in localities Dolní Labe, Czech Republic. In above mentioned years, one selected meadow was mowed in the middle of flight season and the emigrations were then monitored using mark-release-recapture method. Results of population and migration characteristics were calculated in MARK 8.1 software. Subsequently, the effect of mowing on emigration (comparison of emigrations from the meadow before and after mowing) was evaluated using Statistica 13.
The hypotheses of this study were based on the assumption, that the loss of resources after well-timed mowing should increase the activity of adult butterflies. During the monitoring, number of emigrations was increased only in flight season 2015. Unfortunately, the statistical evaluation did not show significant effect of mowing on migrations. On the other hand, the hypothesis dealing with colonization of nearest meadows was confirmed.
Effect of intentional emigration caused by management interventions was unfortunately not proved. However, we found out, that even though the population at one mowed meadow decreased clearly, the metapopulation size at the locality remained more or less stable.
At investigated (mowed) meadow, there was observed a sharp decline of P. nausithous abundance. On the other hand, P. teleius population was only slightly reduced. It is therefore conceivable, that P. teleius are not as susceptible to innapropriate term of mowing. The results obtained in our research conclusively displayed no possible positive effect of mowing in the middle of flight season and a necessity of suitable management maintenance at localities inhabited by Phengaris butterflies.
|
|
I/O Aerosol in Kindergarten - Case Study.
Ondráček, Jakub ; Talbot, Nicholas ; Cusack, Michael ; Vodička, Petr ; Ždímal, Vladimír ; Schwarz, Jaroslav
In last decades, people spend more and more time indoors. When various indoor sources are present, the indoor air quality is driven mainly by these sources. Without the presence of significant indoor sources, the situation is very different and the concentration of aerosol particles in indoor environment follows behavior of outdoor particles (taking into account losses of aerosol particles due to deposition on indoor surfaces and during penetration indoors. Many epidemiological studies show direct link between dose/exposition to fine (< 1µm) and ultrafine (< 100 nm) particles and adverse health effects. With regards to the fact that indoor environment is besides the adults occupied usually also by kids in longer time periods, it is very important to study the indoor environment in a great detail and to understand the behavior of aerosol particles indoors. In the case of the kids being exposed to the indoor aerosol particles, the adverse health effect can be more pronounced and the consequences more dangerous. Nevertheles, at the same time it is necessary to monitor the outdoor environment as well by observing its changing daily pattern and trying to identify the possible sources of outdoor air pollution.\n
Fulltext: content.csg - PDF
Plný tet: SKMBT_C22016102412233 - PDF
|
|
Corrosion behavior of plasma coatings CuAl10 and CuAl50 on magnesium alloy AZ 91
Kubatík, Tomáš František ; Stoulil, J. ; Stehlíková, K. ; Slepička, P. ; Janata, Marek
The most common magnesium alloy AZ 91 is widely used as a structural material, but its use is limited at higher temperatures and high humidity. Plasma spraying is a technology that allows to prepare protective metallic and non-metallic coatings on a wide variety of substrates including magnesium and its alloys. In this study, CuAl10 and CuAl50 were plasma sprayed on magnesium alloy AZ 91 with the aim to study corrosion resistance of the plasma sprayed coatings. The corrosion resistance of layers was evaluated by the method of electrochemical potentiodynamic measurement as well as long-term corrosion tests in a condensation chamber with 0.5 mol\nNaCl at the temperature of 35 °C for 1344 hours. Layers with 1, 2, 5 passes and passes of CuAl10 with the thickness ranging from 75 to 716 mm and CuAl50 with the thickness ranging from 64 to 566 mm were prepared. The increased corrosion velocity was observed in the case of thin layers of 2 and 5 passes due to the development of a galvanic corrosion couple. The CuAl10 layer prepared with ten passes has an outstanding corrosion resistance.
|
|
Possibilities in monitoring of laser welding process
Horník, Petr ; Mrňa, Libor
With increasing demands on the quality of the welds, it is usual to apply automated machine welding with monitoring of the welding process. The resulting quality of the weld is largely affected by the behavior of keyhole. However, its direct observation during the welding process is practically impossible and it is necessary to use indirect methods. At ISI we develop optical methods of monitoring the process based on analysis of radiation of laser-induced plasma using Fourier and autocorrelation analysis. Observation of keyhole inlet opening is partially possible through a coaxial camera mounted on the welding head and the subsequent image processing. A high-speed rear camera to understand the dynamics of the plasma plume. Through optical spectroscopy of the plume, we can study the excitation of elements in a material. Shielding gas flow can be visualized using schlieren method.
|
guest ::
