|
|
Workshop handling truck
Odstrčil, Aleš ; Zeizinger, Lukáš (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis deals with the study of working manipulation trolleys. At the beginning, similar devices are searched. Furthermore, a concept of the lifting device is created, which is supplemented by the calculation of the main components. Finally, a drawing of the assembly of the lifting device is created.
|
|
|
Pressure losses and heat output of the hydraulic blocks of a linear integrated hydraulic unit
Soukup, Lubomír ; Červinka, Martin (referee) ; Klas, Roman (advisor)
A common problem in the design of hydraulic systems is the pressure losses caused by movement of viscous liquid in individual elements of hydraulic circuits. These losses have negative effects on the overall efficiency of hydraulic systems and thus their overall operation. There is a change in temperature of working fluid and components (elements) of circuit due to the result of the mentioned losses. This master thesis is focused on the heat generation (output) in hydraulic cubes of a linear integrated hydraulic cubes (here in after LIHJ) which is the prototype of hydraulic lifting equipment. Losses, arising during the operation LIHJ in pipes and in hoses, can be determined numerically and experimentally. Most of hydrostatic transmitters and others hydraulic components are almost always supplied with the necessary documentation which contains all the necessary information such as experimental characteristics, etc. However problematic parts are the hydraulic blocks which are specific to their size and function. Of course, each manufacturer must prepare technical documentation including characteristics which are important for trouble-free operation of the hydraulic system. The main aim of this work is to determine pressure losses and the heat generation (output) in the hydraulics blocks by program which is used for creating geometry and computing using software like Ansys Fluent, which is based on the finite element method. If these calculations could be compared with experimental measurement technically, then heat generation (output) in both the cubes will be evaluated towards other hydraulic components and the whole system (device). The simulation results will be implemented in software which is used for calculation of heat generation in LIHJ at different operating modes and loads. Furthermore, these results will be the basis for the design of geometry of hydraulic blocks with low pressure losses which will reduce energy consumption of the device. At the end of this thesis, some advanced methods for the manufacturing of hydraulic blocks are briefly introduced, namely the method 3-D casting.
|
|
|
Hydraulic lifting equipment for the tractor
Onderka, Jan ; Zeizinger, Lukáš (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis focuses on designing a lifting device for a tractor three-point hitch. A short research of similar lifting devices was carried out. The concept is designed and supported by analytical calculations of dimensional and functional properties. The strength calculations are carried out in accordance with the standard, and critical areas of the device are checked. The work contains 3D models and plan drawings.
|
|
| |
|
| |
|
|
Workshop lifting and handling devices
Benda, Petr ; Zeizinger, Lukáš (referee) ; Škopán, Miroslav (advisor)
This bachelor’s thesis deals with workshop lifting and handling devices. At the beginning these devices are divided into several groups depending on its characters and benefits. Afterwards the thesis deals with a conceptual design of a movable hydraulic crane. The attention is focused on functional calculation and strength assessment of the main parts. At the end the thesis contains a drawing documentation.
|
|
| |
|
|
The manipulator for a workshop
Hlupík, Marek ; Zeizinger, Lukáš (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis is focused on the design of a mobile manipulator for lifting and moving a motor unit. In the theoretical part of the work is a research of current mobile manipulators for handling the motors. The practical part of the work includes the conceptual design of the manipulator, dimensional, functional and strength calculations for the designed device and drawing documentation.
|
|
|
Lift unit for paste container
Mimochodek, Martin ; Svoboda, Pavel (referee) ; Dvořáček, Jiří (advisor)
The first part deals with the sorts and a separation of the fillers which are used in the food-processing industry. The second part more deeply describes various construction variants of the lift unit rotary piston filler, especially their properties, sort of the driving mechanism and an used components. Final system design is created in Autodesk Inventor 10.
|
|
|
The lifting platform for europalletes
Dvořák, Pavel ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis solves a design of the lifting platform for euro-pallets. The main content of the thesis is the design dimensions of the lifting table, design and calculation of the lift drive and stress calculations of some loaded parts of the structure. The thesis includes an appendix with assembly drawing of the lifting platform and assembly drawing of the table frame.
|
guest ::
