|
|
Shopping centre
Petrášová, Dominika ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The focus of this diploma thesis is the elaboration of project documentation for a construction. The construction is a department store with eight residential units - a multifunctional building. The proposed building has five floors, a basement with cellars for each apartment, parking spaces for visitors of the department store, and independent mechanical parking system for residents of the building. The first floor is comprised of technical room, bicycle shed, and also a pharmacy, bakery, and florist with separate entrances. The second floor serves as a cafe with a terrace and sanitary facilities. There is also a drugstore and a clothing store. The other three floors are used for accommodation, comprising of eight apartments in total. The fifth floor consists of one apartment and a terrace for all residents. The building is designed as a reinforced concrete skeletal structure with a monolithic ceiling and stair slabs. Ceramic blocks are used as infill masonry as well as internal masonry. The roof is designed as flat walkable with concrete paving or as non-walkable with gravel, which is graded according to the floor.
|
|
|
Multipurpose facility Olomouc
Ocelík, Tomáš ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
This thesis is focused on designing a new multipurpose building with parts used for apartments, administration offices and a bar. The land, which the building is situated on, is located in the city of Olomouc. The structure consist of five above-ground floors and one underground floor, where a garage is designed. The vertical supporting construction are made of reinforced cast-in-place concrete columns, the horizontal of reinforced concrete cast-in-place boards, other vertical walls are made of sand-lime and aerated concrete blocks. The roof is warm flat.
|
|
|
Multipurpose facility -Nitra,Chrenová
Vaňová, Vanessa ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation for the construction of new apartment buildings in the city of Nitra. It is a free-standing building with three above-ground and one underground floor in a slightly sloping terrain. The basement of the floor plan extends beyond the above-ground floor, the roof is partly designed as a terrace and partly as a flat green roof. There is a garage, workshop, cellar, utility room and storage for bicycles and stollers. Housing units are located on the upper floors. Each floor has three residential units. The roof above the above-ground floors is a single-skin flat, covered with a layer of aggregate. The foundation structures and the perimeter walls of the basement are made of monolithic reinforced concrete. The internal load-bearing system is designed for all floors as masonry made of ceramic blocks. In the basement there are two supporting concrete pillars transferring the load from the reinforced concrete gutters in the place above the garage. Ceilings, balconies and loggias are made of monolithic reinforced concrete. The perimeter walls above the ground are contact-insulated with the ETICS system.
|
|
|
Intenzive Urban Housing Brno
Giacintová, Sylva ; Urbášková,, Hana (referee) ; Menšíková, Naděžda (advisor)
The subject of this thesis is the architectural study of revitalization of a city block and its spatial structure. Selected part of city was solved already in previous project that preceded own thesis. Merger proposal will allow a larger number of different functions within the complex, which will ensure the residents to various forms of housing, services and employment and leisure activities. The studied area is located in the city of Brno-Veveří. Plan shape of the object based on the area in which the three parties connected to the access road. Mass and spatial design respects the surrounding buildings and uses the sidewalks along the whole of the area. The matrix of the object is divided by two axes passing through the object into three blocks linked by a courtyard. This creates a square with a water surface with the possibility of recreation and sitting under the trees. The shape of these three blocks is further formed in several height terraced layers. Do terraces are placed in the atrium and individual residential and office units have large windows and balcony available. This solution brings natural light into the interior while allowing illumination of the courtyard and surrounding objects within the chosen area. This spatial structure is horizontally divided by function. There are proposed underground public garage, arcade with shops, services, administration and housing. The exterior of the building is designed by combining brick facades and white plaster, which works like optically lighter impression of the building.
|
|
|
Head Office building company
Malý, Jiří ; Kučera, František (referee) ; Daněk, Lukáš (advisor)
This thesis processes project documentation for headquarters of construction company. Main purpose of building is to facilitate administrative nd manufacturing needs of the company. Building contains of reception, offices, meeting room, restrooms and lock rooms for employees, elevator and workshops. There is underground garage in the basement. Building is going to be situated in Stritez u Policky. Building takes up 1088m2 of land. Vertical structures are mainlymade of concrete and brick blocks. Horizontal structures are made of reinforced concrete panels, roof structure is made of wooden trusses.
|
|
|
Auto show
Václavík, Marek ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.
|
|
|
Multifunctional building with health centers
Mecko, Tomáš ; Klímek, Karel (referee) ; Čuprová, Danuše (advisor)
The aim of this master thesis is a design of newly-built multifunctional building with a health centre in a cadaster unit of municipality of Smižany in a nascent development of apartment buildings and detached houses. It is a four-storey building, with partial basement, consisting of the basement and three above-ground storeys. On the first floor there is a small health centre with three ambulances and a pharmacy. The second and the third floor has a character of family living, where six flats are designed, and two of them are wheelchair accessible. In the basement there is localized underground garage for residents, warehouses and technical facilities of the building. Main load-bearing walls are founded by plain concrete foundation strips. Main load-bearing columns in the garage are founded by reinforced concrete foundation pads. The structural system of the basement consists of reinforced concrete load-bearing walls, columns, beams and floor slab. The structural system of the above-ground storeys consists of Porotherm clay blocks and the floor structures are designed by Porotherm ceramic fillers and beams. A roofing of the building is realized by a warm flat roof. Main entrances into the building are oriented to the north, respectively into to the west, the residential part of the building is oriented to the east, west and south.
|
|
|
Residential Complex in Brno - Komín
Šónová, Marcela ; Žalmanová, Petra (referee) ; Nový, Vítězslav (advisor)
The building was designed according to needs and limits of this location, that it responds to. Its functional content, shape and orientation all respect surrounding conditions. The shape of the object reacts on changing terrain and oriantation to the cardinal. The design offers living areas, an equipment for residents and plenty of recreation space. The complex tries to preserve local natural environment how it is possible and it was designed according to principles of sustainable development.
|
|
|
Sports and Leisure Centre Brno
Vacenovská, Veronika ; Vostrejž, Dušan (referee) ; Odvárka, Antonín (advisor)
The subject of the diploma thesis is an architectural study of the center for sport and leisure time in Brno “Za Lužánkami”. In is supposed to supply the space with the possibility of other sports activities. The object of the design is to provide a wide range of sports, fitness activities, wellness and recreation, various leisure activities, or just visiting the shopping passage, which is the main artery of the whole center. It allows people to pass between the leisure center, indoor pool and shopping mall in Královo Pole. The building is designed as a prefabricated reinforced concrete frame structure complemented by a steel latticework in the space of a sports hall and a climbing wall. Curtain walling is designed as a ventilated concrete slab with a photocatalytic function.
|
|
|
BUT Technology Transfer Centre
Vojtěšek, Jiří ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The concept of design is in contrast rectangular mass units with a soft outer shell halls. This transparent ETFE foil sheath immaterial defines the basic volume halls. In contrast, there is the austere cubic mass, consisting of a layer of vertical adjustable curtains in red, which allow control of lighting conditions indoors. Working solution is based on the universality and flexibility of spatial concepts, for use of the area is variable, reflecting the wide professional profile Sciences and technically oriented part of the faculty. Building structure enables change of any user, modification technologies in short cycles and adaptability in terms of surface require. At the is used the principle of "shell and core", ie equipment basic service core is enclosed inside, and other equipment will be easily refillable according to the needs of a specific user. The design consists of three consecutive mass communication-related neck. At the first mass there is entrance space, sanitary facilities, offices, laboratories and technical facilities. At other two mass there are halls, the first is about half the size of the other. These indoor spaces can be variably split a total of 12 identical units (for each unit are the storage areas, sanitary facilities and offices) Storage areas are placed under the hall, as well as underground parking. Connecting neck serves not only to communicate as such, but it is a social or relaxing space. In this area at the same time meet all the staff and transmit a valuable experience.
|
guest ::
