|
|
Familly house
Boor, Peter ; Dostálová, Darina (referee) ; Spáčil, Miroslav (advisor)
The topic of the bachelor´s thesis focuses on the solution of the house in the city of Nitra. The house has a partial basement with two floors and comprises living spaces. The building contains also the arrivals level, downhill ramp, parking area in front of the garage, patio, outdoor stairs and garage located in the basement of a residential building. Floor plan of the house has a varied shape due to the use of diverse materials with two pent and one flat walkable roof. The house will be located on steep terrain. Entrance to the house is situated to the northeast. During the construction of the object system was used Meccato, Ytong.
|
|
|
Apartment building
Ptaková, Adriana ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The subject of this bachelor thesis is the preparation of project documentation for the construction of a residential building. The residential building is located in the northeastern part of Karviná in area designated for mass housing. The land for the new building of the apartment house is flat and undeveloped. The residential building is designed as a detached building with three floors and a partial basement. There are 5 residential units and 1 design office. The whole building is covered with a flat roof. There are 8 parking spaces on the west side. Vertical load-bearing and non-load-bearing structures are made of ceramic Porotherm blocks, in the basement the perimeter structures are made of monolithic reinforced concrete. Horizontal load-bearing structures are monolithic reinforced concrete 230 mm thick, reinforced according to the static calculation. The perimeter masonry will be insulated using the ETICS contact insulation system with a thickness of 160 mm. The balconies are formed using ISO - beams made of reinforced concrete slab. The staircase is chosen as a two-legged staircase to overcome the height levels. The following programs were used to prepare the project documentation: ArchiCAD 25, DEKSOFT, Building Design, Hluk +, Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Adobe Acrobat
|
|
|
Multifunctional building in Žamberk
Vávra, Tomáš ; Galata, Jindřich (referee) ; Štěpánek, Ladislav (advisor)
The main aim of the Bachelor's thesis was to develop the project documentation for the implementation of a new multifunctional building in Žamberk. The building has a partial basement and three floors. The technical facilities and storage space for the residential part of the complex are designed in the basement floor. On the first floor there are commercial spaces for manicure, tobacco shop, hairdresser and cafe. There are also garages on the first floor. In the second and the third floor there are four apartments. The building is designed from ceramic blocks, which are insulated with the contact insulation system ETICS. The ceiling structures are designed as reinforced concrete monolithic slabs. The roofing of the building is a flat roof with a vegetation mixture.
|
|
|
Apartment Building
Zemánek, Petr ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor's thesis is a design of an new apartment building in Bystřice nad Pernštejnem. It is a three-storey building situated on a slightly sloping terrain. The building is detached. The entrance is from the north side, where is an existing acess road. There are 4 same house units in the apartment building. The building is made of ceramic brick blocks. The ceilings are made of prestressed reinforced concrete panels and reinforced concrete prefabricated elements. The roof is flat, single-skinned, green and with a constant inclination. This work contains documentation of the real execution.
|
|
|
City hall with a multifunctional space
Zabáková, Laura ; Machová, Petra (referee) ; Vajkay, František (advisor)
The main task of the master project is to design a nearly zero energy local council building with multipurpose hall in Syrovice cadastral area. It is a three-storey building with basement. In the basement there are technical facilities and garage. Ground floor includes conference room, multipurpose hall, kitchen, cloak room and toilets. First floor includes offices, archive, staff kitchen and toilets. The building’s vertical load-bearing structures are a combination of ceramic block masonry and reinforced concrete columns. Envelope walls are insulated with mineral wool and XPS. The floor slabs and the staircase are designed from cast-in-place reinforced concrete. The building has flat extensive green roofs with photovoltaics installation. The building is equipped with HVAC system with mechanical ventilation with heat-recovery, floor heating and cooling supplied by a ground-water heat pump. The building is also equipped with rainwater accumulation system supplying rainwater for the toilets and watering.
|
|
|
Senior centre in Ždár nad Sázavou
Brukner, Josef ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master thesis is to design home for the residential care of elderly and disabled people in Žďár nad Sázavou. It is designed as a three-storey building with a basement. There are technical facilities, in the basement. Canteen, doctor´s office, manager‘s office and reception are located on the first floor. Second and third floor contains common premises and residential units.building has a prefabricated reinforced concrete structural framework with mineral wool thermal insulation. It is covered with an extensive green roof. Piles are designed as the foundation. Partition wall is designed from plasterboard. The project and 3D rendering were carried out in Revit and Lumion software. All structures comply with the valid standards and regulations. The building site contains also an outdoor car park and a park.
|
|
|
Apartment building
Kryštofová, Iveta ; Žajdlík, Tomáš (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor´s thesis is a process of documentation of implementation of building an apartment house in Brno – cadastre unit Maloměřice. The thesis mainly concerns a detached building with partial basement. This is three-storey building with basement. In my proposal, the object consists of seven dwelling unit total, from which one flat was designed for accessible usage. Structural system of the building was solved by using clay blocks, whereas the basement external walls were created by permanent formwork blocks. The floor structure was made from cast-in-place reinforced slabs. The object is roofed with a warm flat roof.
|
|
|
The flat building in Znojmo
Kučera, Filip ; Janda, Lukáš (referee) ; Beneš, Petr (advisor)
The bachelor thesis deals with proposal of the new flat building. The flat building is located in the edge part of Znojmo. The building is situated in built-up area, intended for housing. The building is solved as detached house in the flat terrain. This is a three-storey building without cellar, which is finished by warm flat roof. On the ground floor there is a garage, a common spaces and a utility room. On the first and second floor there is four dwelling units, which are identical layout. There are flats 3+1. The building is based on foundation strips from concrete strip footing and is made by the building system Porotherm.
|
|
|
Home for the elderly Ořechov
Koláčková, Michaela ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The subject of the diploma thesis is processing of the technical part of the project documentation for the new three-storey home for elderly with partial basement, which is located in the village Ořechov. The object is situated on a flat terrain, which is situated little bit higher than local road. That was used for an architectonic conception of the house –basement is open and accessible by local road from the north side, the rest is under ground. The detached building is partly roofed by a flat green roof and partly roofed by flat roof covered with gravel. The object is divided into individual areas. In the second and third floor is living and social area. 11 dwelling units of different sizes are designed. First floor is also accessible to the public and together with entrance hall and reception, which is situated in the middle of the object with the main entrance on the east side, there are another two separate areas. The left wing serves as a medical department, in the right wing is cofé with his own staff facilities. In the basement is a utility room and storage areas.
|
|
|
Tribune of athletic stadium in Zlín
Gregor, Martin ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The Diploma thesis deals with the processing of project documentation of tribune construction and sporting facilities of athletic stadium in Zlin. Project documentation and attachments are processed according the current legislation, regulations and standards. The tribune is situated on a plot 1090/26, st.5541, which belongs to cadastral area of municipality Zlín, Hradská 854, Zlín. The premises takes up ground plan area of 988,5m2 and the carrying system is designed by skeletal system from prefabricated pieces. This three-storey building lies in natural slope and partly is embedded into in. Capacity of tribune is about 650 spectators and sporting facilities can use about 90 persons.
|
guest ::
